DOI QR코드

DOI QR Code

Comparision in Emission Inspection System of a Gasoline Vehicle in Service

운행 휘발유 자동차의 배출가스검사 시스템 비교

  • Oh, Sangyeob (School of Automotive Engineering, Kyungpook National University) ;
  • Park, Wondeok (Inspection Standard Office, Korea Transportation Safety Authority)
  • 오상엽 (경북대학교 자동차공학부) ;
  • 박원덕 (교통안전공단 검사기준처)
  • Received : 2012.12.07
  • Accepted : 2013.07.17
  • Published : 2014.01.01

Abstract

In the most of a nation, the safety and emission gas inspection system of a vehicle in service have been conducted with the most compatible inspection system according to its real environmental situation. Especially, the state of vehicle emission gas is measured by advanced emission gas inspection equipment. It has the problem that the decrease effect of an environmental pollution matter is not calculated by weight percent measurement type equipment. Therefore, in this study, the correlations for the results of emission gas measurement are analyzed by comparing a weight percent measurement type (IDLE+ASM2525 mode) and an advanced mass measurement type (IM240 mode). As the result, the selectivity of an emission gas by IM240 mode is higher than that by IDLE+ASM2525 mode. In the future, therefore, the introduction of IM240 mode and a mass measurement type equipment are necessary. Also, we need to prepare a vehicle emission gas inspection system for introducing IM240 mode.

Keywords

References

  1. S. Y. Oh, U. S. Yeo, W. D. Park, Y. D. Jung and B. D. Kang, "Improvement in Emission Inspection System of a Gasoline Vehicle in Service," KSAE Annual Conference Proceedings, pp.536-542, 2012.
  2. KOTI, KTSA, A Study Report of Improvement Plans for Vehicle Inspection System, R&D/ 2000-policy Innovation-16, 2001.
  3. K. Newton, W. Steeds and T. K. Garrett, The Motor Vehicle, Society of Automotive Engineers, pp.424-456, 1996.
  4. S. Y. Oh, H. I. Lee, G. W. Kim and I. S. Che, A Study for High Technology Vehicle Inspection System, School of Automotive Engineering, Kyungpook National University, 2012.
  5. M. D. Eom, J. S. Han, S. M. Kim and J. C. Kim, Improvement of the Test Method on the In-use Vehicles by Periodical Emission Inspection - A Correlation Test of between Constant Volume Sampler of Automotive Exhaust Gas Analyzer with Vehicle Mass Analysis System, National Transportation Pollution Research Center, National Institute of Environmental Research, 2006.
  6. T. Lee, J. Kim, J. Park, M. Eom, J. Kim and D. Lee, "Emission Factor and Fuel Economy Calculation using Vehicle Inspection and Maintenance Program," Transactions of KSAE, Vol.17, No.5, pp.97-106, 2009.
  7. Gordon-darby Vmas Study Outline, Sensors Inc., 1999.
  8. R. Klausmeier, Comparision of VMAS Transient IM Test with Steady-state IM Test, de la Torre Klausmeier Cosulting, Inc. (dKC), 2001.
  9. US EPA, IM240 & Evap Technical Guidence, EPA420-R-00-007, 2000.
  10. TOYOTA Technical Training, "Emission Testing & Enhanced I/M," Advanced Emission & Driveability Diagnosis - Course 972, pp.15-28, 2005.
  11. JASTEC. Co. Ltd, http://www.Jastec.co.kr, 2012.
  12. MLTMA' Law, No.414, Vehicle Administration Law Operation Regulation, 2011.
  13. ME Official Instructions, Regulation of Test and Inspection Process for Production Vehicle, No.2009-289, 2009.
  14. ME Official Instructions, Regulation of Certification, Test and Inspection Process for Production Vehicle, No.2009-290, 2009.
  15. H. C. Kim, J. C. Oh, B. I. Yun and G. M. Jung, Understanding Statistics, Kyungmoon Publishing Co., Seoul, pp.233-235, 2010.