DOI QR코드

DOI QR Code

Structural Strength Analysis due to Rib Thickness of Lower Arm

로워암 리브 두께에 따른 구조 강도 해석

  • Cho, Jaeung (Department of Mechanical & Automotive Engineering, Kongju National University) ;
  • Han, Moonsik (Department of Mechanical & Automotive Engineering, Keimyung University)
  • 조재웅 (공주대학교 기계자동차공학부) ;
  • 한문식 (계명대학교 기계자동차공학과)
  • Received : 2013.05.07
  • Accepted : 2013.05.24
  • Published : 2014.01.01

Abstract

This study investigates the structural strength analysis due to rib thickness of lower arm. At structural analysis, model 1 has the most deformation by comparing three models. As most equivalent stress is shown at the part connected with wheel knuckle, the strength becomes weaker in cases of three models. At fatigue analysis, model 1 becomes most unstabilized among three models. Model 3 has most fatigue life and the next model is model 2. The range of maximum harmonic response frequencies becomes 140 to 175Hz in cases of three models. Because the critical frequency at model 3 becomes highest among three models but the stress exceeds yield stress, model 3 becomes most unstabilized at vibration durability. As models 1 and 2 has less than yield stress, these models become stabilized. Model 2 becomes most favorable by comparing three models at structural, fatigue and vibration analyses. This study result can be effectively utilized with the design of lower arm by investigating prevention against damage and its strength durability.

Keywords

References

  1. J. U. Cho and M. S. Han, "Durability and Stress Analysis on Automotive Lower Arm," Journal of the Korean Society of Machine Tool Engineers, Vol.19, No.3, pp.376-380, 2010.
  2. J. H. Kim, D. H. Shim and M. J. Choi, "Comparative Analysis of the Stress and Strain of Lower Arm Follow on Impact Speed at Unlawfulness Speed Downer," KSAE Fall Conference Proceedings, pp.1719-1724, 2005.
  3. K. K. Lee and S. H. Han, "Multi-level Shape Optimization of Lower Arm by Using TOPSIS and Computational Orthogonal Array," Journal of the Korean Society for Precision Engineering, Vol.28, No.4, pp.482-489, 2011.
  4. J. R. G. Ngouan, K. I. Kong, Y. B. Park, H. W. Park, J. W. Keum, H. S. Jeong and Y. B. Jung, "Design Optimization of CFRP Lower Arm Using Failure Criteria," Proceeding of KSAE Local Conference, pp.85-88, 2010.
  5. R. K. Uyyuru, M. K. Surappa and S. Brusethaug, "Tribological Behavior of Al-Si-SiCp Composites/ automobile Brake Pad System under Dry Sliding Conditions," Tribology International, Vol.40, Issue 2, pp.365-373, 2007. https://doi.org/10.1016/j.triboint.2005.10.012
  6. T. K. Lee and B. S. Kim, "Vibration Analysis of Automobile Tire due to Bump Impact," Applied Acoustics, Vol.69, Issue 6, pp.473-478, 2008. https://doi.org/10.1016/j.apacoust.2007.12.003
  7. S. H. Han, K. S. Jang, S. Y. Shin, T. H. Lee, T. W. Kwon and B. K. Suh, "Automation of Fatigue Durability Analysis of Welded Bogie Frame by Performing Work Flow Analysis," Proceeding of KSME Spring Conference, pp.133-138, 2006.
  8. J. Kim, S. J. Kang and B. S. Kang, "Computational Approach to Analysis and Design of Hydroforming Process for an Automobile Lower Arm," Computers and Structures, Vol.80, Issues 14-15, pp.1295-1304, 2002. https://doi.org/10.1016/S0045-7949(02)00081-0
  9. S. H. Han, T. H. Lee, S. Y. Shin, C. H. Suh and T. W. Kwon, "Development of Modeling Support System for Lower Arm in Automobile Suspension Module," Journal of Society of CAD/CAM Engineers, Vol.11, No.1, pp.49-56, 2006.
  10. J. Y. Lim, W. J. Kang and Y. M. Kim, "Experimental Investigation of Fatigue Crack Propagation in a LCA," KSAE Spring Conference Proceedings, pp.1472-1479, 2007.