Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Non-Sintered Ceramic Containing Basalt Powder

현무암 석분을 혼입한 비소성 세라믹의 개발

  • Kim, Gui-Shik (Major of Mechanical Engineering, Jeju National University) ;
  • Kim, Jung-Yun (Industial Graduate School, Jeju National University) ;
  • Jeong, Ji-Hyun (Major of Mechanical Engineering, Jeju National University)
  • 김귀식 (제주대학교 기계공학전공) ;
  • 김정윤 (제주대학교 산업대학원) ;
  • 정지현 (제주대학교 기계공학전공)
  • Received : 2013.10.07
  • Accepted : 2014.04.06
  • Published : 2014.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.

Keywords

References

  1. W. H. Choi, C. W. Park, W. K. Jung and K. H. Kim, 2012, "Fundamental Properties of Limestone Powder Added Cement Environment-friendly Concrete for Concrete Pavement", International Journal of Highway Engineering, Vol. 14, No. 4, pp. 37-49. https://doi.org/10.7855/IJHE.2012.14.4.037
  2. N. Almeida, F. Branco, J. d. Brito and J. R. Santos, 2007, "High-performance Concrete with recycled Stone Slurry", Cement and Concrete Research 37, pp. 210-220. https://doi.org/10.1016/j.cemconres.2006.11.003
  3. G. S. Kim, H. G. Kim and J. H. Jeong, 2013, "A Study on Bloating of Porous Ceramic", Journal of the Korean Society for Power System Engineering, Vol. 17, No. 2, pp. 108-113.
  4. G. S. Kim, H. K. Kim and J. H. Jeong, 2012, " A Study on Artificial Stone Manufacture with Wast Stone and Waste Stone Sludge of Basalt", Research Institute of Advanced Technology Jeju National University, Vol. 23, pp. 43-52.
  5. M. Norimasa, S. Arinaga, T. Oike and N. Yukihira, 2011, "Development of Casting Calcium Carbonate Containing Fly Ash", AIJ Technol. Des., Vol. 17, No. 35, pp. 17-20. https://doi.org/10.3130/aijt.17.17
  6. S. Arinaga, M. Norimasa, N. Terao, N. Yukihira and T. Oike, 2005, "Apperance Behavior of Compressive Strength on Casting Calcium Carbonate", J. Struct. Coristr. Eng. AIJ, No. 589, pp.23-28.
  7. J. Y. Noh and E. P. Lee, 2011, "A study on Possibility of Fire Ignition by Lime(CaO)", Proceedings of the KIFI 2011 Spring Conference, pp.102-116.

Cited by

  1. A Study on Bloating of Porous Foam by Pressure Infiltration with H2O2 vol.20, pp.5, 2016, https://doi.org/10.9726/kspse.2016.20.5.086