Journal of Fisheries and Marine Sciences Education (수산해양교육연구)

The Korean Society for Fisheries and Marine Sciences Education (한국수산해양교육학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Characteristics of Boiling Heat Transfer of Two-Phase Loop Thermosyphons

루우프형 2상 유동 열사이폰의 비등열전달 특성에 관한 연구

  • Received : 2014.06.05
  • Accepted : 2014.06.13
  • Published : 2014.06.28
Download PDF
⟨ Previous Next ⟩

Abstract

A heat exchanger using two-phase loop thermosyphons was developed as a waste heat recovery system. An experimental study was carried out on the heat transfer characteristics of two-phase loop thermosyphons heat exchanger and the results from the experiments were used to see the possibility which the two-phase loop thermosyphons could be an alternate solution for waste heat recovery system. In the present work, R134a has been used as the working fluid and the filling rate do working fluid and heat flux have been used as the experimental parameters. The results show that the filling rate of working fluid and heat flux are very important factors for the operation of two-phase loop thermosyphons. The experimental results showed the provisional results as a waste heat recovery system.

Keywords

References

  1. Gaugler, R. S.(1994), Heat Transfer Device, Us Patent No.2350348, Applied December 21, 1942. Published June 6.
  2. Kim, S. H.. Shin H. M. and Kim C. J.(2005), A Numerical Analysis of Convective Heat Transfer in Air Flow Channels of a Plate Fin-tube Matrix for Heat Pipe Heat Sinks, Journal of the Korean Society of Marine Engineering 29(8), 862-869.
  3. Lee, J. S.. Rhi, S. H.. Kwon, J. H. and Lee, Y. (1999), A Use of Two-Phase Loop Thermosyphons for Heat Extraction of Enclosed Spaces: Experiments and Analysis, Proceedings of 11th International Heat Pipe Conference, Vol 1. Tokyo, September 1999(B), 82-87.
  4. Lee, K. W.. Hong, S. H.. Chang, K. C. Lee, K. J. and Ra, H. S.(1995), Heat Transporting Technology of Separate Heat Pipe Heat Exchanger, Energy R. D. 17(2).
  5. Lee, K. W.. Rhi, S. H.. Chang, K. C. and Lee, Y.(2000), An Experimental and Simulation Study on Medium and Large Scale Two-Phase Loop Thermosyphons, 6th Int. Heat Pipe Conference, Chiang
  6. Lim, T. W. and You, S. S.(2008), A Study on the microcooling Fin Fabrication Process for Enhancing Boiling Heat Transfer, Jour. Fish. Mar. Sci. Edu. 19(3), 366-372.
  7. Lim, T. W.. Park, J. U. and Kim. J. H.(2002), A Study on Heat Transfer and Pressure Drop in Flow Boiling of Binary Mixtures in a Uniformly Heated Horizontal Tube, Jour. Fish. Mar. Sci. Edu. 14(2), 177-190.
  8. Park, J. U.. Cho, D. H.(2004), A Study on Heat Transfer Characteristics of Helical Coiled Tube, Jour. Fish. Mar. Sci. Edu. 16(2), 257-270.
  9. Park, Y. H. and Boo, J. H.(2008), A Numerical Study on the Heat Transfer Characteristics of a Metal Hydride Reactor with Embedded Heat Pipes, KSME, 2346-2351, Mai, November 5
  10. Park, Y. H.. Jung, E. G. and Boo, J. H.(2007), A Numerical Study on the Heat Transfer Characteristics of a Solar Thermal Receiver with High-temperature Heat Pipes, Proceedings of the KSME, 71-76, to 9.
  11. Rhi, S. H.. Kim, W. T, Song, K. S. and Lee, Y. (1998), A Desing of Telecommuni cations System(I): Experiments and Visualization, KSME int. J, 12(5), 926-941.
  12. Youn, H. P. and Boo, J. H.(2008), A Numerical Study on the Heat Transfer Characteristics of a Hydrogen Storage Material with Inserted Heat Pipes, KSME, 318-321.