참고문헌
- 허병욱, 배규웅, 문태섭(2004) 매입형(슬림플로어) 합성보의 휨성능 평가-춤이 깊은 데크 플레이트와 비대칭 H형강 철골보, 한국강구조학회논문집, 한국강구조학회, 제16권, 제2호, pp.235-246. Heo, B.W., Bae, K.W., and Moon, T.S. (2004) Flexural Capacity of the Encased(Slim Floor) Composite Beam with Deep Deck Plate, Journal of Korean Society of Steel Construction, KSSC, Vol.16, No.2, pp.236-245 (in Korean).
- 채흥석, 류재용, 정경수, 문영민, 최성모(2010) 단부 보강한 합성보(에코거더)시스템의 구조성능에 관한 실험적 연구, 한국강구조학회논문집, 한국강구조학회, 제22권, 제6호, pp.533-541. Chae, H.S., Ryoo, J., Chung, K.S., Moon, Y.M., and Choi, S.M. (2010) Experimental Study on Structural Performance of End-Reinforced Steel-Beam System (Eco-Girder), Journal of Korean Society of Steel Construction, KSSC, Vol.22, No.6, pp.533-541 (in Korean).
- Park, K.S., Heo, B.W., Kwak, M.G., and Bae, K.W. (2008) Experimental Study on the Flexural Behavior of Encased Composite Beams for Residential Buildings, Journal of the Architectural Institute of Korea Structure and Construction, Vol.24, No.12, pp.91-98.
- 신현섭(2005) 합성보 전단연결부의 구조거동에 대한 비교 분석, 한국강구조학회논문집, 한국강구조학회, 제17권, 제6호, pp.737-747. Shin, H.S. (2005) Analysis of a Load Carrying Behavior of Shear Connection at the Interface of the Steel-Concrete Composite Beam, Journal of Korean Society of Steel Construction, KSSC, Vol.17, No.6, pp.737-747 (in Korean).
- Ciutina, A.L. and Stratan, A. (2008) Cyclic performances of shear connectors, Composite Construction in Steel and Concrete VI, ASCE, SEI, Devil Thumb Ranch, Colorado, USA.
- Amit, P. (2006) Behavior of channel shear connectors: Push-out tests, M.S. Thesis, University of Saskatchewan, Canada.
- 김성배, 김상섭(2006) T형 합성보의 시어 커넥터 형상에 따른 전단내력 평가에 관한 연구, 한국강구조학회논문집, 한국강구조학회, 제18권, 제2호, pp.279-288. Kim, S.B. and Kim, S.S. (2006) An Evaluation on the Shear Strength for Different Forms of Shear Connector in T-type Composite Beam, Journal of Korean Society of Steel Construction, KSSC, Vol.18, No.2, pp.279-288 (in Korean).
- CEN (2001) prEN 1994-1-1:2001: Draft No.2 of Eurocode 4, Design of composite steel and concrete structures Part 1.1: General rules and rules for buildings, Comite Europeen de Normalisation (CEN), Brussels, Belgium.
- CEN (2004) prEN 1994-1-1:2004: Final Version of Editorial Group; Eurocode 4, Design of composite steel and concrete structures. Part 1.1: General rules and rules for buildings, Comite Europeen de Normalisation (CEN), Brussels, Belgium.
- Johnson, R.P. (1994) Composite structures of steel and concrete. Volume I. Beams, slabs, columns, and frames for buildings, Blackwell Scientific Publications, Osney Mead, Oxford.
- 한국강구조학회(2011) 하중저항계수설계법에 의한 강구조설계기준 해설, 구미서관. Korean Society of Steel Construction (2011) Korean Steel Structure Design Code and Commentary; Load and Resistance Factored Design, Goomibook (in Korean).
피인용 문헌
- Cyclic Loading Test on Connection of SRC Column-Composite Beam Consisting of H-Section and U-Section Members vol.26, pp.4, 2014, https://doi.org/10.7781/kjoss.2014.26.4.263
- Experimental Study on the Shear Capacity of Cap-Type Shear Connectors With Constant Intervals vol.18, pp.2, 2018, https://doi.org/10.9712/KASS.2018.18.2.121
- Experimental Study on the Flexural Capacity of the U-Flanged Truss Hybrid Beam vol.18, pp.4, 2018, https://doi.org/10.9712/KASS.2018.18.4.123
- 중력하중을 받는 SRC기둥-합성보 접합부 실험 vol.26, pp.5, 2014, https://doi.org/10.7781/kjoss.2014.26.5.441
- 앵글을 전단연결재로 사용하는 합성보의 휨성능 vol.27, pp.1, 2014, https://doi.org/10.7781/kjoss.2015.27.1.063
- BESTOBEAM 전단연결재의 길이에 따른 전단 내력 평가 vol.27, pp.5, 2014, https://doi.org/10.7781/kjoss.2015.27.5.483
- 춤이 작은 신형상 고성능 하이브리드 합성보의 휨성능 평가 vol.28, pp.3, 2016, https://doi.org/10.7781/kjoss.2016.28.3.151
- 춤이 큰 하이브리드 합성보와 SRC기둥 접합부의 내진성능에 관한 연구 vol.29, pp.2, 2014, https://doi.org/10.7781/kjoss.2017.29.2.135
- 연속 캡 형상 전단연결재의 전단 내력에 관한 실험 연구 vol.19, pp.2, 2014, https://doi.org/10.9712/kass.2019.19.2.91
- Push-out Test on Evaluation of Shear Strength Using Angle Shear Connectors vol.31, pp.6, 2014, https://doi.org/10.7781/kjoss.2019.31.6.413
- Push-out Test for U-Tube Flange H-Beam with Z-Bar Anchors vol.31, pp.6, 2019, https://doi.org/10.7781/kjoss.2019.31.6.423
- Strength Evaluation of Composite Beams with Embossing Webs by Concrete Freezing Damage vol.32, pp.6, 2020, https://doi.org/10.7781/kjoss.2020.32.6.341
- Push-Out Tests on Various Steel Anchors with Partial-Length Welding in Steel-Concrete Composite Members vol.11, pp.1, 2014, https://doi.org/10.3390/app11010105
- Strength Evaluation and Finite Element Analysis of Channel Shear Connectors vol.33, pp.4, 2021, https://doi.org/10.7781/kjoss.2021.33.4.237