대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제38권8호
  • /
  • Pages.831-836
  • /
  • 2014
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

소듐 시험루프 내 고온 압력용기의 크리프-피로 건전성 평가

Evaluation of Creep-Fatigue Integrity for High Temperature Pressure Vessel in a Sodium Test Loop

  • 투고 : 2014.04.21
  • 심사 : 2014.06.05
  • 발행 : 2014.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 한국원자력연구원 내에 설치될 예정인 소듐시험 시설인 SELFA(Sodium Thermal-hydraulic Experiment Loop for Finned-tube Sodium-to-Air heat exchanger) 내에서 정상상태 가동온도가 $510^{\circ}C$의 고온 압력용기인 팽창탱크에 대해 고온 건전성 평가를 수행하였다. 팽창탱크에 대해 3 차원 유한요소해석에 기초하여 고온설계 기술기준인 ASME Section III Subsection NH 와 프랑스의 RCC-MRx 코드를 따라 크리프-피로 손상평가를 수행하였다. 평가결과 팽창탱크는 크리프-피로 설계 과도 하중 하에서 구조적 건전성을 유지하는 것으로 나타났다. 316L 스테인리스강 재질의 동 압력용기에 대해 정량적 코드 비교 분석을 수행하였다.

In this study, high temperature integrity evaluation on a pressure vessel of the expansion tank operating at elevated temperature of $510^{\circ}C$ in the sodium test facility of the SEFLA(Sodium Thermal-hydraulic Experiment Loop for Finned-tube Sodium-to-Air heat exchanger) to be constructed at KAERI has been performed. Evaluations of creep-fatigue damage based on a full 3D finite element analyses were conducted for the expansion tank according to the recent elevated temperature design codes of ASME Section III Subsection NH and French RCC-MRx. It was shown that the expansion tank maintains its integrity under the intended creep-fatigue loads. Quantitative code comparisons were conducted for the pressure vessel of austenitic stainless steel 316L.

키워드

참고문헌

  1. Kim, Y. I., Jang, J. W., Lee, J. H., Kim, S. J., Kim, S. O., Kim, J. B., Jung, H. Y. and Lee, H. Y., 2012, Conceptual Design Report of SASFR Demonstration Reactor of 600MWe Capacity, KAERI/TR-4598/2012.
  2. Lee, H. Y., Eoh, J. H. and Lee, Y. B., 2013, "High Temperature Design of Finned-tube Sodium-to-Heat Exchanger in a Sodium Test Loop," Nuclear Engineering and Design, Vol. 265, December 2013, pp.833-840. https://doi.org/10.1016/j.nucengdes.2013.08.073
  3. ASME Boiler and Pressure Vessel Code, Section III, 2013, Rules for Construction of Nuclear Power Plant Components, Div. 1, Subsection NH, Class 1 Components in Elevated Temperature Service, ASME.
  4. RCC-MRx, Section III Subsection B, Class 1 N1RX, 2012, Reactor Components its Auxiliary Systems and Supports, 2012 Edition, AFCEN.
  5. Lee, H. Y., Kim, J. B. and Lee, J. H., 2010, "Construction of a High Temperature Gr.91 Sodium Component Test," Materials Science Forum, Vols.416-419, pp.528-531.
  6. Lee, H. Y., Kim, J. B. and Lee, J. H., 2012, "High Temperature Design and Damage Evaluation of Mod.9Cr-1Mo Steel Heat Exchanger," Journal of Pressure Vessel Technology, Transactions of ASME, Vol. 133, Oct. pp.051101-10.
  7. Lee, H. Y., Kim, J. B. and Park, H. Y., 2012, "Creep- Fatigue Damage Evaluation of Sodium to Air Heat Exchanger in Sodium Test Loop Facility," Nuclear Engineering and Design, 250, pp.308-315. https://doi.org/10.1016/j.nucengdes.2012.05.034
  8. Lee, H. Y., Eoh, J. H. and Lee, Y. B., 2013, "High-Temperature Design of Sodium-to-Air Heat Exchanger in Sodium Test Loop," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 5, pp. 665-671. https://doi.org/10.3795/KSME-A.2013.37.5.665
  9. Lee, H. Y., Eoh, J. H. and Lee, Y. B., 2013, "High Temperature Design and Damage Evaluation of a Helical Type Sodium-to-Air Heat Exchanger in a Sodium-Cooled Fast Reactor," Journal of Mechanical Science and Technology, Vol. 27, No.9, pp.2729-2735. https://doi.org/10.1007/s12206-013-0718-2
  10. ABAQUS Users Manual, 2010, Version 6.10, Dassault Systems, USA.