DOI QR코드

DOI QR Code

내화피복공법 적용 고강도 콘크리트의 내화성능 확보 방안에 관한 실험적 연구

An Experimental Study on Fire resistance Performances of High-Strength Concrete Application of Fire-proofing Protection Method

  • 김정진 (롯데건설(주) 기술연구원)
  • 투고 : 2014.01.02
  • 심사 : 2014.03.14
  • 발행 : 2014.03.25

초록

Owing to the dense internal organization of high-strength concrete, water vapor generated within the concrete cannot be easily discharged to the outside. The increased internal vapor pressure leads to a phenomenon known as spalling. This study investigated the use of fire-protection covering methods for preventing the spalling of high-strength concrete in order to inhibit temperature transmission to concrete structure by covering the material and to minimize the increase in cross-section. The fire-protection covering methods considered included fireproof plaster boards, high-performance fireproof plaster boards, and a composite covering method (fireproof plaster board + intumescent coating system). Among these, the high-performance fireproof plaster board exhibited 20~40 % higher fire protection performance compared to the regular fireproof plaster board. If the composite covering material is exposed to high-temperature fires, especially above $500^{\circ}C$, a 4 mm-thick intumescent coating system extends up to at least 50 mm, thereby blocking most of the heat transferred inside the board and suppressing the temperature increase within the concrete. The above-mentioned mechanism leads to more than 40 % decrease in the coating thickness. The restrictive application of this method could reinforce fire protection performance on finishing parts of gypsum board in existing buildings.

키워드

참고문헌

  1. 小野紘一, 太田義和 : コンクリート構造物の火災安全性につい て, コンクリート工学, Vol.40, No.7, pp.10-15, 2002.
  2. 국토해양부, "고강도 콘크리트 기둥 보의 내화성능 관리기준", 국토해양부 고시 제2008-334호(2008).
  3. Phan, L.T.: Fire Performance of High-Strength Concrete, A report of the State-of-the-Art, Building and Fire Research Laboratory, National Institute of Standards and Technology, NISTIR 5934, 1996.11.
  4. 이주호, 문형재, 김정진 : 폴리믹스 혼입 고강도 콘크리트의 펌프압송 성상에 관한 실험적 연구, Journal of the Korea Concrete Institute, Vol.24, No.5, pp.509-516, 2000.10.
  5. 송영찬, 이세현, 김우재, 양완회, 박동철, 백병훈 : 고강도 콘크리트 내화피복 특성연구, 한국콘크리트학회 가을 학술발표회 논문집, Vol.18, No.2, pp.429-432, 2006.
  6. Tea-Gyu Lee : An Experimental Study on the Firepoof Covering Thickness of High Strength Concrete Members with Spray Coating, J. of Korean Institute of Fire Sci. & Eng. Vol.24, No.4, 2010.
  7. Zhang, B., Bicanic, N., Pearce, C. J. and Balabanic, G.: Residual fracture properties of normal and high-strength concrete subject to elevated temperatures, Magazine of Concrete Research, Vol.52, No.2, 2000.4.
  8. Kalifa, P., Menneteau, F-D. and Quenard, D.: Spalling and Pore Pressure in HPC at High Temperatures, Cement and Concrete Research, Vol.30, pp.1915-1927, 2000. https://doi.org/10.1016/S0008-8846(00)00384-7
  9. 長尾覚博 : 高温加熱を受ける増すコンクリート部材内の水分移 動と物性変化に関する研究, 博士論文, 北海道大学大学院, 1994.3.
  10. 井上明人, 飛坂基夫, 桝田佳寛 : 高強度コンクリートの耐火性 の評価に関する研究, 日本建築学会大会学術講演梗概集(中国), pp.531-532, 1990.
  11. Y. Ichikawa, G.L. England : Prediction of moisture migration and pore pressure build-up in concrete at high temperature, Nuclear Engineering and Design 228, pp.245-259, 2004. https://doi.org/10.1016/j.nucengdes.2003.06.011
  12. Cheongoo Han, Mincheol Han, Youngsun Heo, Yongwon Song : Performance Investigation on Spalling Resistance of High strength concrete columns with various covering materials, subjected to fire, The 6th International Symposium on Architectural Interchanges in Asia, Daegu Convention Center, pp.1297-1300, 2006.
  13. 송훈 : 화재시 고강도 콘크리트의 내화성능에 관한 연구, 동경대학 박사학위 논문, 2003.