Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis on Driving Performance of Linear Induction Motor for Maglev System by Finite Element Method

유한요소법을 이용한 자기부상용 선형유도기의 운전 특성 분석법

  • Kim, Ki-Chan (Department of Electrical Engineering, Hanbat National University)
  • 김기찬 (한밭대학교 전기공학과)
  • Received : 2014.02.21
  • Accepted : 2014.07.10
  • Published : 2014.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a novel analysis method on the driving performance of LIM (linear induction motor) by FEM (finite element method). First, a linear model was converted with a rotation model to perform the dynamic analysis for a long time. Through the FEM model, the slip parameter for the control algorithm could be induced effectively. The LIM for the traction system was performed at a constant V/f in the region of constant torque, and a constant V and variable f in the region of constant power. Several slip characteristic curves according to the voltage and frequency were calculated by FEM in advance. The driving performance was then induced by interpolating the slip characteristic curves according to the load of the vehicle.

본 논문에서는 유한요소법을 사용하여 자기부상열차용 선형 유도 전동기의 효율적인 운전곡선 도출 방법을 제안한다. 긴 시간의 동특성 해석을 위해 선형유도기 모델을 선형에서 회전형 타입으로 변환하고, 제어시 필요한 슬립 파라미터를 전자장 해석을 통하여 효과적으로 도출하였다. 견인용 선형유도전동기는 인버터에 의해 저속의 정토크 영역에서는 전압/주파수 (V/f) 일정제어를 수행하고, 고속에서의 정출력 영역에서는 전압을 고정시키고 주파수를 증가시키면서 제어한다. 따라서 논문에서는 정토크 및 정출력 영역의 운전 특성을 도출하기 위해 각 구간에서 일정한 스텝으로 슬립특성 곡선을 도출하고, 차량의 운전 상태에 따른 슬립 및 주파수를 특성곡선의 보간법에 의해 결정한다. 본 방법을 이용하면 차량의 임의의 부하상태에 따라 최적의 운전 지령을 제시할 수 있다.

Keywords

References

  1. A.A. Pourmoosa, M. Mirsalim, "Equivalent circuit of Linear Induction Motor based on coupled-circuit model and optimization design using Imperialist Competitive Algorithm", IEEE Conference on Power Electronics, pp. 349-354, Feb, 2013. DOI: http://dx.doi.org/10.1109/PEDSTC.2013.6506731
  2. Zhang Qingjie, Zhang Yanqing, "Scheme design of high performance converting control of linear induction motor used for electromagnetic launch", IEEE International Symposium on Electromagnetic Launch Technology (EML), pp. 1-4, May, 2012. DOI: http://dx.doi.org/10.1109/EML.2012.6511067
  3. Junfei Han, Yaohua Li, Yumei Du, Wei Xu, Nengqiang Jin "Dynamic characteristics study of single-sided linear induction motor with finite element method", IEEE Conference on Advanced Intelligent Mechatronics, pp. 439-444, July, 2008. DOI: http://dx.doi.org/10.1109/AIM.2008.4601701
  4. Zurong Zhang, T.R. Eastham, Graham E. Dawson, "Peak thrust operation of linear induction machines from parameter identification ", IEEE Conference on Industry Applications Conference, pp. 375-379, Oct, 1995. DOI: http://dx.doi.org/10.1109/IAS.1995.530324
  5. J. Jamali, "End effect in linear induction and rotating electrical machines ", IEEE Transaction on Energy Conversion, pp. 440-447, Sept, 2003. DOI: http://dx.doi.org/10.1109/TEC.2003.815853
  6. Jia Zhao, Wei Zhang, Jin Fang, Zhongping Yang, T.Q. Zheng, Youmei Liu, "Design of HTS Linear Induction Motor using GA and the Finite Element Method", IEEE Conference on Industrial Electronics and Applications (ICIEA), pp. 527-531, June, 2010. DOI: http://dx.doi.org/10.1109/ICIEA.2010.5517100
  7. D. Hall, J. Kapinski, M. Krefta, O. Christianson, "Transient Electromechanical Modeling for Short Secondary Linear Induction Machines", IEEE Transactions on Energy Conversion, pp. 789-795, Sept, 2008. DOI: http://dx.doi.org/10.1109/TEC.2008.926060
  8. Wei Xu, Jian Guo Zhu, Yongchang Zhang, Zixin Li, "Equivalent Circuits for Single-Sided Linear Induction Motors", IEEE Transactions on Applications Industry, pp. 2410-2423, Nov.-Dec, 2010. DOI: http://dx.doi.org/10.1109/TIA.2010.2073434
  9. K.-W. Lee, K.-H. Um, "A Study on the Deterioration Process of 22kV Power Cables in Operation", The Journal of The Institute of Internet, Broadcasting and Communication, Vol. 13, No. 3, pp. 127-133, 2013. https://doi.org/10.7236/JIIBC.2013.13.3.127
  10. B.-S. Shin, J.-H. Park, C.-W. Moon, H.-S. Ahn, "Design of a Model Based Controller with Safety", The Journal of The Institute of Internet, Broadcasting and Communication, Vol 13, No 2, pp. 9-14, 2013. https://doi.org/10.7236/JIIBC.2013.13.2.9
  11. D. Nam, "Planning of Barrier Free Pedestrian Safety Devices", Journal of The Institute of Webcasting, The Journal of The Institute of Internet, Broadcasting and Communication, Vol 13, No 2, pp. 217-223, 2013. https://doi.org/10.7236/JIIBC.2013.13.2.217