한국융합학회논문지 (Journal of the Korea Convergence Society)

  • 제5권2호
  • /
  • Pages.7-11
  • /
  • 2014
  • /
  • 2233-4890(pISSN)
  • /
  • 2713-6353(eISSN)
한국융합학회 (Korea Convergence Society)
권호 표지
DOI QR코드

DOI QR Code

무릎인공관절의 하중에 따른 내구성에 관한 해석적 연구

Analytical Study on Durability due to the Load of Artificial Knee Joint

  • 조재웅 (공주대학교 기계자동차공학부)
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 투고 : 2014.03.10
  • 심사 : 2014.05.27
  • 발행 : 2014.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 텅스텐합금강의 상부구조와 폴리에틸렌소재로 구성된 하부구조의 무릎 인공관절이 하중을 받았을 때에 인공관절의 하중분포와 인공관절의 설치를 위한 지지구멍에 가해지는 응력분포에를 유한요소해석에 의하여 연구하였으며, 이러한 결과들을 이용하여 실물에 대한 실험을 위한 기초자료를 얻을 수 있었다. 상부구조의 모서리 끝부분부터 하중이 집중되어 크랙이 발생되며 이는 의학계에 보고된 인공관절파손에 의한 조직괴사사례와 그 거동이 일치하였다.

The artificial joint is consisted with the upper structure of tungsten alloy steel and the lower part of polyethelene are applied with load. When this joint is applied with load in this study, the load distribution at the joint and the stress distribution of support hole to install the joint are investigated by finite element analysis. These results can be utilized at obtaining the basic material to have the experiment for the real thing. The crack is initiated as the load is concentrated at the end of corner on the upper structure. This behavior is in accord with a case of tissue damage due to the breakage of artificial joint reported at medical science.

키워드

참고문헌

  1. Ali M.Alsamhan, Rational analysis of human artificial knee replacements, Engineering science, pp. 49-54, 2013.
  2. Paul F. Lachiewicz, Fixation Survival and Osteolysis with a Mordern Oosteror-stabilized Total Knee Arthroplasty, The Journal of Arthroplasty, pp. 66-70, 2014.
  3. Paul F. Lachiewicz, MD, Elizabeth S. Soileau, Fixation, Survival and Osteolysis with a Modern Posterior-Stabilized Total Knee Arthroplasty, The Journal of Arthroplasty, pp. 57-60, 2014.
  4. Sven Herrmann.Christoph Woernle Michael Kaehler.Roman Rachholz.Robert Souffrant. Janos Zierath.Daniel Kluess.Rainer Bader, HiL simulation for testing joint stability after total knee arthroplasty, Multibody Syst Dyn, pp. 55-67, 2012.
  5. M. M. Davoodi, N. A. Abu Osman, A. A. Oshkour, M. Bayat, Knee Energy Absorption in Full Extension Landing Using Finite Element Analysis, 5th Kuala Lumpur International Conference on Biomedical Engineering 2011 IFMBE Proceedings, Vol. 35, pp. 175-178, 2011.
  6. M.S.A. Megat Ali, N. Shariffudin, A.H. Jahidin, M.H. Mat Som and A.N. Norali, A Preliminary Study: Finite Element Analysis of an Artificial Knee Implant Design, 2010 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2010), pp. 3-5, 2010.