Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Vibration Fatigue Analysis of Spot Welded Component considering Change of Stiffness due to Fatigue Damage

피로손상의 누적에 따른 강성변화를 고려한 점용접부의 진동피로해석

  • Kang, Ki-Weon (Department of Mechanical Engineering, Kunsan National University)
  • Received : 2013.12.10
  • Accepted : 2014.02.06
  • Published : 2014.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this paper was to evaluate the fatigue life to apply the vibration fatigue analysis considering the stiffness change of the spot welding due to fatigue damage accumulation. For this, the mechanical and fatigue properties of base and spot welded standard specimens were obtained through the tensile and constant amplitude fatigue test. The transfer function of the spot-welded structure was obtained from the frequency response analysis and fatigue analyisis was performed under the condition of PSD=0.11. A vibration fatigue analysis that considered changes in the frequency response due to the fatigue damage that is, failure of some wleding point was conducted on spot-welded structure. The fatigue life of the spot-welded structure was determined by combining the transfer function, the S-N curve of the tensile-shear spot-welded joint and the input PSD.

본 논문의 목적은 진동 피로해석 기법을 적용하여 다수의 용접점을 포함하고 있는 점용접 구조물의 강성변화를 고려하여 피로수명을 평가하는 것이다. 먼저 모재부 인장특성 및 점용접부의 인장 및 피로특성을 획득하였다. 유한요소법을 적용하여 S-N 선도를 획득하여 피로해석에 적용하였다. 주파수 응답해석을 수행하여 구조물의 전달함수를 획득하였고, 주파수영역에서 0.11의 PSD를 선정하여 수행하였다. 강성변화 및 고유진동수의 변화를 알아보기 위하여 점용접부의 총 6개 지점 중 최소수명이 발생하는 지점을 기준으로 1개씩 제거하여 반복 해석을 수행하였다. 따라서 강성이 낮아질수록 고유주파수도 낮아지는 것을 확인하였다. 이러한 조건하에서 진동피로해석을 수행하여 피로손상의 누적에 따른 전달합수의 변화를 고려한 진동피로해석을 수행하였다.

Keywords

References

  1. Kwak, S. J., Jin, J. W., Kim, T. S., Noh, K. H. and Kang, K. W., "Hardness Estimation of Compressor Journal using Instrumented Indentation Technique", Transactions of the KSMTE, Vol. 21, No. 3, pp. 376-381, 2011.
  2. Lee, S. B., Jeon, S. H. and Yim, H. J., "Optimum Design of Welding Pitch Considering Fatigue Life of Spot Welding Nuggets", Transactions of the KSMTE, Vol. 16, No. 4, pp. 179-185, 2008.
  3. Eom, J. S., Choi, N. R., Lee, B. C., and Kim, D. S., "Study on optimization of spot welds arrangement for structural rigidity, "Transactions of the KSME, pp. 106-109, 2006.
  4. Na, E. G., Oh, S. H., and Kim, J. K., "Study on Characteristics of Weldability for the Spot Weld Region of the Car Body," Transactions of the KSAE, pp. 57-61. 2013.
  5. Nam, et al,. "Fatigue Analysis of Spot-welded Multi-Lap Joint of STS301L Using the Maximum Stress", Transactions of the KSAE, Vol. 11, No. 6, pp. 101-107, November, 2003.
  6. MSC. Software, MSC. Patran Users guide, Ver 2012.
  7. MSC. Software, MSC. Nastran Users guide, Ver 2012.
  8. Turan Dirlik, 1985, Application of computer in Fatigue Analysis, University of Warwick, Ph. D. Thesis.
  9. Miner, M. A. 1945, "Cumulative Damage in Fatigue", J. Appl. Mech., Vol. 12, Trans ASME, Vol. 67, pp. A159-A164.
  10. KS B 0801, 2003, "Method of Tensile Test for Metallic Materials", Korean Standard.
  11. KS B 0528, 2001, "Method of Fatigue Testing for Spot Welded Joint", Korean Standard.
  12. KS B 0802, 2003, "Method of Tensile Test for Metallic Materials", Korean Standard.
  13. MSC. Software, MSC. Fatigue. Quick Start Guide, Ver 2012.

Cited by

  1. Entity Resolution Approach of Data Stream Management Systems vol.91, pp.4, 2016, https://doi.org/10.1007/s11277-016-3275-z
  2. A Novel Method for Functional Annotation Prediction Based on Combination of Classification Methods vol.2014, 2014, https://doi.org/10.1155/2014/542824
  3. An Efficient Cooperative Neighbor Discovery Framework of Cognitive Radio Ad-Hoc Networks for Future Internet of Things vol.91, pp.4, 2016, https://doi.org/10.1007/s11277-015-3143-2