DOI QR코드

DOI QR Code

하수고도처리용 미세조류의 최적회수를 위한 전기응집기술 적용에 있어 전류의 영향

Effects of electric current on electrocoagulation for optimal harvesting of microalgae for advanced wastewater treatment

  • 이석민 (경희대학교 환경공학과.환경연구센터) ;
  • 주성진 (경희대학교 환경공학과.환경연구센터) ;
  • 최경진 (경희대학교 환경공학과.환경연구센터) ;
  • 장산 (경희대학교 환경공학과.환경연구센터) ;
  • 황선진 (경희대학교 환경공학과.환경연구센터)
  • Lee, SeokMin (Department of Environmental Engineering, Center for Environmental Studies, Kyung Hee University) ;
  • Joo, Sung Jin (Department of Environmental Engineering, Center for Environmental Studies, Kyung Hee University) ;
  • Choi, Kyoung Jin (Department of Environmental Engineering, Center for Environmental Studies, Kyung Hee University) ;
  • Zhang, Shan (Department of Environmental Engineering, Center for Environmental Studies, Kyung Hee University) ;
  • Hwang, Sun-Jin (Department of Environmental Engineering, Center for Environmental Studies, Kyung Hee University)
  • 투고 : 2014.07.28
  • 심사 : 2014.08.11
  • 발행 : 2014.08.15

초록

Microalgae is known as one alternative energy source of the fossil fuel with the small size of $5{\sim}50{\mu}m$ and negative charge. Currently, the cost of microalgae recovery process take a large part, about 20 - 30% of total operating cost. Thus, the microalgae recovery method with low cost is needed. In this study, the optimum current for Scenedesmus dimorphus recovery process using electrocoagulation techniques was investigated. Under the electrical current, Al metal in anode electrode is oxidized to oxidation state of $Al^{3+}$. In the cathode electrode, the water electrolysis generated $OH^-$ which combine with $Al^{3+}$ to produce $Al(OH)_3$. This hydroxide acts as a coagulant to harvest microalgae. Before applying in 1.5 L capacity electrocoagulation reactor, Scenedesmus dimorphus was cultured in 20 L cylindrical reactor to concentration of 1 OD. The microalgae recovery efficiency of electrocoagulation reactor was evaluated under different current conditions from 0.1 ~ 0.3 A. The results show that, the fastest and highest recovery efficiency were achieved at the current or 0.3 A, which the highest energy efficiency was achieved at 0.15 A.

키워드

참고문헌

  1. Brennan, L., Owende, P. (2010). Biofuels from microalgae A review of technologies for production, processing, and extractions of biofuels and co-products. Renewable and sustainable energy reviews, Vol. 14, pp 557-577. https://doi.org/10.1016/j.rser.2009.10.009
  2. Cardozo, KHM., Guaratini, T., Barros, MP., FalcALo, VR., Tonon, AP., Lopes, NP, Campos ,S., Torres, MA., Souza, AO., Colepicolo, P. (2007). Metabolites from algae with economical impact. Comparative biochemistry and physiology. Vol. 146, pp 60-78. https://doi.org/10.1016/j.cbpb.2006.09.003
  3. Chisti, Y. (2007). Biodiesel from microalgae. Biotechnology Advances, Vol. 25, pp 294-306 https://doi.org/10.1016/j.biotechadv.2007.02.001
  4. Kim, DS., Park, Ys. (2009). Removal of Rhodamine B using Electrocoagulation process. Journal of korean society of environmental engineers. Vol. 31(12), pp 1081-1088
  5. Gudin, C., Therpenier, C. (1986). Bioconversion of solar energy into organic chemicals by microalgae, Advandces in biotechnological processes, Vol. 6, pp 73-110
  6. Lee, A. K., D. M. Lewis, P. J. Ashman (2009). Microbial flocculation, a potentially lowcost harvesting technique for marine microalgae for the production of biodiesel, J.Appl.Phycol, Vol. 21, pp 559-567 https://doi.org/10.1007/s10811-008-9391-8
  7. Oh, MY., Kim, YK. (2009). Removal characteristics of organics in landfill leachate by electrocoagultion. Journal of korean society of environmental engineers. Vol. 23(1), pp 31-38
  8. Raja R, Hemaiswarya S, Kumar NA, Sridhar S, Rengasamy R. (2008). A perspective on the biotechnological potential of microalgae. Crit Rev Microbiol Vol. 34(2), pp 77-88. https://doi.org/10.1080/10408410802086783
  9. Zongo, I., Leclerc, JP., Maiga, HA., Wethe, J., Lapicque, F. (2009). Removal of hexavalent chromium from industrial wastewater by electrocoagulation : A comprehensive comparison of aluminium and iron electrodes. Separation and Purification Technology. Vol 66, pp 159-166 https://doi.org/10.1016/j.seppur.2008.11.012