DOI QR코드

DOI QR Code

HSS강판 판재성형 시 스프링백 최소화를 위한 드로우 비드 최적 설계

Bead Optimization to Reduce Springback of Sheet Metal Forming using High Strength Steel

  • 투고 : 2014.05.06
  • 심사 : 2014.07.23
  • 발행 : 2014.08.15

초록

Recently, high strength steel (HSS) sheet metal has been widely used to improve lightweight structures in the automotive industry. Because HSS sheets have high strength but low elongation, it is difficult both to make products with complex shapes and to control excessive springback. In order to reduce the springback after forming using HSS, draw beads were introduced in this study. The design variables, including the draw-bead positions and shapes, were optimized using a finite element analysis. A mold for a scanner support, which is part of an A3 printer, was designed using the proposed method and then utilized. The results from a finite element simulation and optimization were compared with the experiment results.

키워드

참고문헌

  1. Han, S., Kim, S., Seo, Y., Yu, E., Kim, J., 2011, Development of 1.2GPa grade hot rolled ultra high strength steel for automobiles, Trans. of the Kor. Soc. Automotive Eng., 1873-1879.
  2. Park, S., Kang, J., Hwang, B., Kim, S., Kwak, J., 2011, Mechanical Properties of High-Strength Light-Weight Steel Sheets, Trans. of the Kor. Soc. Automotive Eng., 1869-1872.
  3. Kim, K., Jang, S., Jung, H., Oh, K., Yun, J., Park, C., 2011, The Development of High Strength Steel Car on Sill Side by Roll Forming Process, Trans. of the Kor. Soc. Automotive Eng., 29-34.
  4. Yang, W. Y., Lee, S. Y., Keum, Y. T., Hwang, J. Y., Yoon, C. S., Shin, C. S., Cho, W. S., 2003, Spingback Control in the Forming Processes for High-Strength Steel Sheets, Trans. of Meterials Processing, 12:8 718-723. https://doi.org/10.5228/KSPP.2003.12.8.718
  5. Suh, C. H., Jung, Y., Lim, Y. H., Yun, H. Y., Lee, K., 2012, The Effects of Process Parameters of Multi-Stage Forming on Springback for a U-Channel made of Ultra-High-Strengh Steel, Trans. Kor. Soc. Mech. Eng. A, 36:3 283-288. https://doi.org/10.3795/KSME-A.2012.36.3.283
  6. Keum, Y. T., Kim, D. J., Kim, G. S., 2010, Numerical Design of Drawbeads for Advanced High Strength Steel Sheets, Trans. of Meterials Processing, 348-356.
  7. Jung, D., Lee, S., 2000, The Effect of the Drawbead Shape on the Sheet Metal Forming Process, Trans. Kor. Soc. Mech. Eng., A 24:6 1624-1632.
  8. PAM-STAMP, 2012, PAM-STAMP user's manual, ESI-Group Co..
  9. Gom ATOS 2011, ATOS Professional user's manual, GOM mbH.
  10. PIAnO, 2008, PIAnO user's manual version 2.4, PIDOTECH Inc..

피인용 문헌

  1. Process Design of Automobile Seat Rail Lower Parts using Ultra-High Strength, DP980 Steel vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.160
  2. 알루미늄 캔 딥드로잉에서 Bottoming을 이용한 스프링백 최소화 vol.17, pp.9, 2014, https://doi.org/10.5762/kais.2016.17.9.302
  3. 초고강도 소재 성형시 형상 동결을 이용한 Seat Track 부품 개발 vol.26, pp.1, 2014, https://doi.org/10.7735/ksmte.2017.26.1.59
  4. 1180 MPa급 초고장력강판을 이용한 자동차 상부 시트트랙 개발을 위한 해석적 연구 vol.34, pp.8, 2017, https://doi.org/10.7736/kspe.2017.34.8.525
  5. L-벤딩에서 공정 설계변수가 스프링백에 미치는 영향의 평가를 위한 유한요소해석 및 검증 vol.30, pp.6, 2014, https://doi.org/10.5228/kstp.2021.30.6.275