Journal of the Korean Society of Food Science and Nutrition (한국식품영양과학회지)

The Korean Society of Food Science and Nutrition (한국식품영양과학회)
권호 표지
DOI QR코드

DOI QR Code

Physicochemical Properties of Rice-based Expanded Snacks according to Extrusion Conditions

Extrusion 제조 조건에 따른 쌀 스낵 제품의 이화학적 품질특성

  • Eun, Jong-Bang (Department of Food Science & Technology, Chonnamn National University) ;
  • Hsieh, Fu-Hung (Department of Biological Engineering/Food Science, University of Missouri-Columbia) ;
  • Choi, Ok-Ja (Department of Food & Cooking Science, Sunchon National University)
  • Received : 2014.05.23
  • Accepted : 2014.06.23
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Physicochemical properties of rice-based expanded snacks extruded with rice flour, high amylose starch, and isolated soy protein were investigated using a twin-screw extruder. The ingredients were extruded at various feed moisture contents (19~23%) and screw speeds (200~400 rpm) at a constant feed rate (43.4 kg/hr). Bulk density and apparent density of rice snacks were 0.06~0.21, and 0.55~0.65 respectively. Bulk density, apparent density, water absorption index, and breaking strength of rice snacks increased with increasing feed moisture content and decreasing screw speed. However, expansion and water solubility index of rice snacks increased with decreasing feed moisture content and increasing screw speed. Hunter's color L values of rice snacks was lower with increasing screw speed at feed moisture contents of 19% and 21%, but was not significantly different from a feed moisture content of 23%. On the other hand, a and b values of rice snacks were higher with increasing screw speed a feed moisture content of 19%. X-ray diffraction intensity of rice snacks decreased with decreasing feed moisture content and increasing screw speed. X-ray diffraction of rice snacks was V-type at feed moisture contents of 19% and 21% and screw speeds of 300, and 400 rpm. In the microstructure of the cross section of rice snacks, air cells in rice snacks were not well formed, and cell walls were thicker with increasing feed moisture content and decreasing screw speed.

쌀가루, 고아밀로오스 전분, 분리대두단백, 설탕 및 소금을 첨가하여 feed 수분함량 19~23%, screw speed 200~400 rpm, feed rate 43.6 kg/hr 조건에서 제조한 쌀 스낵의 이화학적 특성을 분석한 결과는 다음과 같다. 쌀 스낵의 bulk density는 0.06~0.21, apparent density는 0.55~0.65 정도로 나타났고, feed 수분함량이 많을수록, screw 속도가 감소할수록 증가하는 경향을 보였다. 쌀 스낵의 팽화율은 density와는 반대로 feed 수분함량이 낮을수록, screw 속도가 증가할수록 증가하였다. 쌀 스낵의 WAI는 feed 수분함량이 많을수록, screw 속도가 감소할수록 증가한 반면, WSI는 WAI와는 반대의 경향을 나타냈다. 쌀 스낵의 breaking strength는 feed 수분함량이 증가할수록, screw 속도가 감소할수록 증가하였다. 쌀 스낵의 색도 중 L값은 feed 수분함량 19%, 21%에서는 screw 속도가 증가할수록 L값은 낮았으나, feed 수분함량 23%에서는 screw 속도에 따른 유의적인 차이는 없었다. a, b값은 feed 수분함량 19%에서는 screw 속도가 증가함에 따라 높아졌다. 쌀 스낵의 x-ray 회절도는 feed 수분함량이 낮을수록, screw 속도가 높을수록 회절강도가 낮게 나타났고, feed 수분함량 19%, 21%, screw 속도 300 및 400 rpm에서는 V 도형의 특징을 나타냈다. 쌀 스낵의 내부 단면구조는 feed 수분함량이 많을수록, screw 속도가 낮을수록 기공의 생성이 잘 되지 않았고 세포벽이 두껍게 나타났다.

Keywords

References

  1. Yoon SJ. 1999. Tteok, snack, beverages of Korea. Ji-Gu Publishing Co., Seoul, Korea. p 10-14.
  2. The Korea Rice Foodstuffs Association. http://www.krfa.or.kr/board/read.php?bid=pds3&num=1730&page=1(accessed month? 2014).
  3. Kim MR. 2011. The status of Korea's rice industry and the rice processing industry. Food Industry and Nutrition 16(1):22-26.
  4. Kang SH, Ryu GH. 2002. Analysis of traditional process for Yukwa making, a Korean puffed rice snack (I): steeping and punching process. Korean J Food Sci Technol 34:597-603.
  5. Tie Jin, Lee ES, Hong ST, Ryu GH. 2007. Manufacturing of Goami flakes by using extrusion process. Korean J Food Sci Technol 39: 146-151.
  6. Singh N, Smith AC. 1997. A comparison of wheat starch, whole wheat meal and oat flour in the extrusion cooking process. J Food Eng 34: 15-32. https://doi.org/10.1016/S0260-8774(97)00069-1
  7. Lin S, Hsieh F, Huff HE. 1997. Effects of lipids and processing conditions on degree of starch gelatinization of extruded dry pet food. LWT - Food Sci Technol 30: 754-761. https://doi.org/10.1006/fstl.1997.0271
  8. Pansawat N, Jangchud K, Jangchud A, Wuttijumnong P, Saalia FK, Eitenmiller RR, Phillips RD. 2008. Effects of extrusion conditions on secondary extrusion variables and physical properties of fish, rice-based snacks. LWT - Food Sci Technol 41: 632-641. https://doi.org/10.1016/j.lwt.2007.05.010
  9. Altan A, McCarthy KL, Maskan M. 2008. Evaluation of snack foods from barley-tomato pomace blends by extrusion processing. J Food Eng 84: 231-242. https://doi.org/10.1016/j.jfoodeng.2007.05.014
  10. Han GH, Kim BY. 2003. Optimization of the extrusion processing conditions of soymilk residue and corn grits mixture. J Korean Soc Food Sci Nutr 32: 1270-1277. https://doi.org/10.3746/jkfn.2003.32.8.1270
  11. Kim CH, Tie J, Ryu GH. 2012. Effects of moisture content on physical properties of extruded cereal flours. J Korean Soc Food Sci Nutr 41: 1603-1610. https://doi.org/10.3746/jkfn.2012.41.11.1603
  12. Cho SC, Kang BS. 2013. Determination of the optimal mixture ratio for extrudates of Job's-tear and wheat flour by mixture design analysis. Korean J Food Sci Technol 45:473-477. https://doi.org/10.9721/KJFST.2013.45.4.473
  13. Jung BM, Park DK, Kim ES, Rhee KS, Rhee KC. 2000. Sing-screw extrusion putting of rice flour-defatted soy floursquid blends: process optimization and product characterization. J Korean Soc Food Sci Nutr 29: 412-419.
  14. Lee C. 2004. Optimization for extrusion-cooking of rice-ISP-file fish mixture by response surface methodology. J Korean Soc Food Sci Nutr 33: 1742-1747. https://doi.org/10.3746/jkfn.2004.33.10.1742
  15. Lee SY, Jang SY, Park MJ, Kim BK. 2007. The quality and storage characterization of extrusion-puffed Yukwa. Korean J Food Cookery Sci 23: 369-377.
  16. Choi HD, Seog HM, Choi IW, Park MW, Ryu GH. 2004. Preparation of flakes by extrusion cooking using barley broken kernels. Korean J Food Sci Technol 36: 276-282.
  17. Ilo S, Liu Y, Berghofer E. 1999. Extrusion cooking of rice flour and amaranth blends. LWT - Food Sci Technol 32: 79-88. https://doi.org/10.1006/fstl.1998.0497
  18. Ding QB, Ainsworth P, Tucker G, Marson H. 2005. The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice based expanded snacks. J Food Eng 66: 283-289. https://doi.org/10.1016/j.jfoodeng.2004.03.019
  19. Grenus KM, Hsieh F, Huff HE. 1993. Extrusion and extrudate properties of rice flour. J Food Eng 18: 229-245. https://doi.org/10.1016/0260-8774(93)90088-2
  20. Hagenimana A, Ding X, Fang T. 2006. Evaluation of rice flour modified by extrusion cooking. J Cereal Sci 43: 38-46. https://doi.org/10.1016/j.jcs.2005.09.003
  21. Ding QB, Ainsworth P, Plunkett A. 2006. The effect of extrusion conditions on the functional and physical properties of wheat-based snacks. J Food Eng 73: 142-148. https://doi.org/10.1016/j.jfoodeng.2005.01.013
  22. Onyango C, Noetzold H, Bley T, Henle T. 2004. Proximate composition and digestibility of fermented and extruded uji from maize-finger millet blend. LWT - Food Sci Technol 37: 827-832. https://doi.org/10.1016/j.lwt.2004.03.008
  23. Thymi S, Krokida MK, Papa A, Maroulis ZB. 2005. Structural properties of extruded corn starch. J Food Eng 68:519-526. https://doi.org/10.1016/j.jfoodeng.2004.07.002
  24. Yanniotis S, Petraki A, Soumpasi E. 2007. Effect of pectin and wheat fibers on quality attributes of extruded cornstarch. J Food Eng 80: 594-599. https://doi.org/10.1016/j.jfoodeng.2006.06.018
  25. Carvalho CWP, Takeiti CY, Onwulata CI, Pordesimo LO. 2010. Relative effect of particle size on the physical properties of corn meal extrudates: effect of particle size on the extrusion of corn meal. J Food Eng 98: 103-109. https://doi.org/10.1016/j.jfoodeng.2009.12.015
  26. Shin M. 2004. Development and applications of resistant starch. Food Industry and Nutrition 9(2): 1-9.
  27. Seol SM, Bang MH, Choi OS, Kim WK. 2003. Effects of high amylose starch on lipid metabolism and immune response in rats. J Korean Soc Food Sci Nutr 32: 450-457. https://doi.org/10.3746/jkfn.2003.32.3.450
  28. Choi YM, Oh SH, Yu KW, Shin KS, Ra KS, Park CS, Kim KM, Suh HJ. 2005. Physiological characteristics of resistant starch (HI-MAIZE DIET) fortified with other dietary fiber components. J Korean Soc Food Sci Nutr 34: 351-355. https://doi.org/10.3746/jkfn.2005.34.3.351
  29. Haralamp SG. 2000. Resistant starch-a review of the physical properties and biological impact of RS3. Carbohydr Polym 41: 285-292. https://doi.org/10.1016/S0144-8617(99)00147-2
  30. Eun JB, Hsieh F, Choi OJ. 2009. Physical properties of Yukwa base according to the extrusion processing conditions (1): manufacturing of Yukwa base with combination of glutinous rice flour and rice flour. J Korean Soc Food Sci Nutr 38: 1760-1766. https://doi.org/10.3746/jkfn.2009.38.12.1760
  31. Pyler EJ. 1979. Physical and chemical test methods. In Baking Science and Technology. Sosland Pub. Co., Kansas City, MO, USA. Vol II, p 891-895.
  32. Yagci S, Gogus F. 2008. Response surface methodology for evaluation of physical and functional properties of extruded snack foods developed from food-by-products. J Food Eng 86: 122-132. https://doi.org/10.1016/j.jfoodeng.2007.09.018
  33. Yang SH, Peng J, Lui WB, Lin J. 2008. Effect of adlay species and rice flour ratio on the physicochemical properties and texture characteristic of adlay-based extrudates. J Food Eng 84: 489-494. https://doi.org/10.1016/j.jfoodeng.2007.06.010
  34. Bhatnagar S, Hanna MA. 1995. Physical, mechanical, and thermal properties of starch-based plastic foams. Trans ASABE 38: 567-571. https://doi.org/10.13031/2013.27867
  35. Kaur M, Singh N. 2006. Relationships between selected properties of seeds, flours, and starches from different chickpea cultivars. Int J Food Prop 9: 597-608. https://doi.org/10.1080/10942910600853774
  36. Jin Z, Hsieh F, Huff HE. 1995. Effects of soy fiber, salt, sugar and screw speed on physical properties and microstructure of corn meal extrudate. J Cereal Sci 22: 185-194. https://doi.org/10.1016/0733-5210(95)90049-7
  37. Nyombaire G, Siddiq M, Dolan KD. 2011. Physico-chemical and sensory qual ity of extruded light red kidney bean (Phaseolus vulgaris L.) porridge. LWT - Food Sci Technol 44: 1597-1602. https://doi.org/10.1016/j.lwt.2011.02.016
  38. Cisneros FH, Kokini JL. 2002. A generalized theory linking barrel fill length and air bubble entrapment during extrusion of starch. J Food Eng 51: 139-149. https://doi.org/10.1016/S0260-8774(01)00050-4
  39. Rayas-Duarte P, Majewska K, Doetkott C. 1998. Effect of extrusion process parameters on the quality of buckwheat flour mixes. Cereal Chem 75: 338-345. https://doi.org/10.1094/CCHEM.1998.75.3.338
  40. Suknark K, Philips RD, Chinnan MS. 1997. Physical properties of directly expanded extrudates formulated from partially defatted peanut flour and different types of starch. Food Res Int 30: 575-583. https://doi.org/10.1016/S0963-9969(98)00016-7
  41. Mendonca S, Grossmann MVE, Verhe R. 2000. Corn bran as a fibre source in expanded snacks. LWT - Food Sci Technol 33: 2-8. https://doi.org/10.1006/fstl.1999.0601
  42. Ainsworth P, Ibanoglu S, Plunkett A, Ibanoglu E, Stojceka V. 2007. Effect of brewers spent grain addition and screw speed on the selected physical and nutritional properties of extruded snack. J Food Eng 81: 702-709. https://doi.org/10.1016/j.jfoodeng.2007.01.004
  43. Stojceska V, Ainsworth P, Plunkett A, İbanoglu S. 2009. The effect of extrusion cooking using different water feed rates on the quality of ready-to-eat snacks made from food by-products. Food Chem 114: 226-232. https://doi.org/10.1016/j.foodchem.2008.09.043
  44. Wen LF, Rodis P, Wasserman BP. 1990. Starch fragmentation and protein insolubilization during twin-screw extrusion of corn meal. Cereal Chem 67: 268-275.
  45. Meng X, Threinen D, Hansen M, Driedger D. 2010. Effects of extrusion conditions on system parameters and physical properties of a chickpea flour-based snack. Food Res Int 43: 650-658. https://doi.org/10.1016/j.foodres.2009.07.016
  46. Hsieh F, Huff HE, Peng IC. 1990. Studies of whole cottonseed processing with a twin-screw extruder. J Food Eng 12: 293-306. https://doi.org/10.1016/0260-8774(90)90004-R
  47. Hung PV, Maeda T, Morita N. 2007. Study on physicochemical characteristics of waxy and high-amylose wheat starches in comparison with normal wheat starch. Starch 59: 125-131. https://doi.org/10.1002/star.200600577
  48. Thuwall M, Boldizar A, Rigdahl M. 2006. Extrusion processing of high amylose potato starch materials. Carbohydr Polym 65: 441-446. https://doi.org/10.1016/j.carbpol.2006.01.033
  49. Panmanabhan M, Bhattachayrya M. 1989. Extrudate expansion during extrusion cooking of foods. Cereal Food World 34: 945-949.

Cited by

  1. Characteristics of the Dependent Variable due to Changes in the Conditions of the Independent Variable During the Producing of Collets Added with Rice and Dried Shrimp by Single Extruder vol.27, pp.5, 2015, https://doi.org/10.13000/JFMSE.2015.27.5.1352
  2. Effects of Emulsifier Additions on the Physical Properties of Extruded Psyllium vol.23, pp.2, 2014, https://doi.org/10.13050/foodengprog.2019.23.2.118
  3. Physicochemical Properties of Puffed Snack Using Pellet Added with Ginseng Powder vol.23, pp.3, 2014, https://doi.org/10.13050/foodengprog.2019.23.3.186