Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Reliability Demonstration Test Method for Electromagnetic Shielding Doorset with a Sub-Unit Subjected to Preventive Replacement

예방교체부품을 가지는 전자파차폐용 문세트의 신뢰성입증시험법

  • Received : 2014.03.03
  • Accepted : 2014.08.24
  • Published : 2014.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

An electromagnetic shielding doorset must satisfy requirements associated with both mechanical strength/durability and electromagnetic shielding. Among the primary components of the doorset, a finger strip-a leaftype spring normally made of beryllium copper-is a core part to shield electromagnetic waves as well as to endure repetitive dry sliding friction. This study presented a reliability demonstration test method for the doorset system and, by a simple and simultaneous implementation, of the replacement interval of the finger strip. A rigorous evaluation for the qualification of maintenance or replacement interval is included in the reliability demonstration test of any series system that holds critical maintenance sub-units.

전자파차폐용 문세트는 기계적 강도 및 내구성과 전자파 차폐라는 전기적 성능 요구를 동시에 충족시켜야 하므로 이에 알맞은 신뢰성입증시험법의 정립이 요구된다. 특히 전자파 차폐 성능에 직접적인 영향을 미치는 핑거스트립이라고 불리는 베링륨동 재질의 박형 스프링 하위 부품은 문짝과 직접적인 반복 건조마찰이 발생하므로 내구성에 만전을 기해야 하는 부위인데, 산업계에서는 주기적인 보전이 필요한 이 핑거스트립의 교체주기에 대한 보증도 또한 필요한 실정이다. 이러한 요구들에 대응하여 본 연구에서는 전자파차폐용문세트의 시험항목들을 정하고 전체 시스템 수명뿐만 아니라 교체품의 교체주기에 대한 보증을 단순한 방법으로 동시수행하는 입증시험을 설계하였다. 결론적으로 하위 교체부품을 가지는 직렬 시스템의 신뢰성입증시험에서는 교체품의 교체주기에 대한 보증도 항상 함께 포함시킬 것을 제안한다.

Keywords

References

  1. Abernethy, R. B., 2000, The New Weibull Handbook, Williams Enterprises, Florida.
  2. Nelson, W., 1985, "Weibull Analysis of Reliability Data with Few or No Failures," Journal of Quality Technology, Vol. 17, No. 3, pp. 140-146.
  3. Kwon, Y. I., 2006, "A Two-Stage Reliability Demonstration Test for Mechanical Components," Journal of the Korean Society for Quality Management, Vol. 34, No. 1, pp. 20-26.
  4. Kwon, Y. I., 2011, "Economic Design of Zero-Failure Reliability Qualification Test," Journal of the Korean Society for Quality Management, Vol. 39, No. 1, pp. 71-77.
  5. Yadav, O. P., Singh, N., and Goel, P. S., 2006, "Reliability Demonstration Test Planning: A Three Dimensional Consideration," Reliability Engineering and System Safety, 91, pp. 882-893. https://doi.org/10.1016/j.ress.2005.09.001
  6. UFGS-13 27 54.00 10, 2007, "Special Construction - Electromagnetic Shielding," United State Army Corps of Engineers.
  7. KS F 2236, 1999, "Doorsets - Soft Heavy Body Impact Test," Korean Standard Association.
  8. KS F 2630, 2007, "Doorsets - Static Torsion Test," Korean Standard Association.
  9. KS F 2631, 2007, "Doorsets - Vertical Load Test," Korean Standard Association.
  10. KS F 2632, 2007, "Doorsets - Repeated Opening and Closing Test," Korean Standard Association.
  11. KS F 2634, 2000, "Doorsets - Static Loading Test," Korean Standard Association.
  12. KS F 3109, 2013, "Doorsets," Korean Standard Association.
  13. MIL-STD-188-125, 1998, "High-Altitude Electromagnetic Pulse (HEMP) Protection for Ground-based C4I Facilities Performing Critical, Time-Urgent Missions for Common Long-Haul/Tactical Communication Systems," USA Department of Defense.
  14. IEEE 299, 1997, Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures, The Institute of Electrical and Electronics Engineers.
  15. James L. Bossert, 1990, Quality Function Deployment: A Practitioner's Approach, ASQC Quality Press.