DOI QR코드

DOI QR Code

Strength Evaluation on Sectional Members of Prefabricated Precast Concrete Arch with Reinforced Joint

보강된 이음부가 적용된 조립식 프리캐스트 콘크리트 아치의 단면 강도 평가

  • 주상훈 (단국대학교 토목환경공학과) ;
  • 정철헌 (단국대학교 토목환경공학과) ;
  • 배재현 (단국대학교 토목환경공학과)
  • Received : 2014.05.29
  • Accepted : 2014.08.27
  • Published : 2014.10.01

Abstract

In the previous study, the structural performance of proposed precast concrete arch with reinforced joint was evaluated by structural experiment. In this paper, finite element analysis considering both material and contact nonlinearity was carried out on the specimens of the previous study. Based on the result of analysis and experiment, friction coefficient between concrete blocks was determined. To evaluate the strength of sectional member, elastic analysis was carried out on the arch using linear elastic analysis program. The section force was compared with the nominal strength of arch section. It was concluded that the maximum load of all the specimens exceed the nominal strength of arch section. Those results of the strength evaluation were similar to the results of structural experiments. Therefore, it is concluded that the elastic analysis and ultimate strength model can effectively evaluate the strength for the proposed precast concrete arch composed of concrete blocks and reinforced joint in design.

선행연구에서 제안된 조립식 프리캐스트 콘크리트 아치의 구조성능이 실험적으로 평가되었다. 본 연구에서는 이에 대하여 재료 및 접촉 비선형을 고려한 유한요소해석을 수행하였으며, 실험결과와 비교하여 콘크리트 블록 간의 마찰계수를 결정하였다. 아치부재 단면의 강도를 평가하기 위해 탄성해석으로 단면력을 산정하여 이를 단면의 공칭강도와 비교하였다. 모든 실험체에서 평가된 최대 하중은 부재단면의 공칭강도를 상회하였으며, 실험과 유사한 결과를 보였다. 따라서 탄성해석과 단면의 극한강도모델에 의한 방법은 설계시 콘크리트 블록과 보강된 이음부로 구성된 조립식 프리캐스트 콘크리트 아치의 단면 강도를 효과적으로 평가할 수 있을 것으로 판단된다.

Keywords

References

  1. ABAQUS (2009). Abaqus analysis user's manual version 6.9, Dassault Systemes Simulia Corp.
  2. Boothby, T. E. (2001). "Load rating of masonry arch bridges." Journal of Bridge Engineering, Vol. 6, No. 2, pp. 79-86. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:2(79)
  3. Boothby, T. E. and Fanning, P. J. (2001). "Assessment methods for masonry arch bridges." Structural Faults & Repair-2001.
  4. Boothby, T. E. and Fanning, P. J. (2004). "Load rating of masonry arch bridges: Refinements." Journal of Bridge Engineering, Vol. 9, No. 3, pp. 304-307. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:3(304)
  5. Chung, C. H., Joo, S. H., Choi, D. C. and Lee, J. Y. (2014). "Structural performance of precast concrete arch with reinforced joint." Journal of the Korea Society of Civil Engineers, Vol. 34, No. 1, pp. 29-47 (in Korean). https://doi.org/10.12652/Ksce.2014.34.1.0029
  6. Department of Transport (2004). Design manual for roads and bridges(DMRB), Vol. 2, Section 2, Part 14, BD 91/04, London (UK).
  7. Gupta, A., Taylor, S. E., Kirkpatrick, J., Long, A. and Hogg, I. (2005). "A flexible concrete arch system." Concrete Research in Ireland Colloquium.
  8. Hognestad, E. (1951). A study of combined bending and axial load in reinforced concrete members, Bulletin 399, University of Illinois Engineering Experiment Station, Urbana, Ill.
  9. Kaushik, H. B., Rai, D. C. and Jain, S. K. (2007). "Stress-strain characteristics of clay brick masonry under uniaxial compression." Journal of Material in Civil Engineering, Vol. 19, No. 9, pp. 728-739. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(728)
  10. Korean Geotechnical Society (2009). Structure foundation design code (in Korean).
  11. Taylor, S. E., Gupta, A., Kirkpatrick, J. and Long, A. E. (2007). "Testing of a novel flexible concrete arch system." Proceedings of ACIC 07, Advanced Composites in Construction, 2nd-4th April 2007, University of Bath, UK.
  12. Taylor, S. E., Robinson, D., Ritchie, N., Mcllwaine, K. and Gupta, A. (2006). "Testing of half-scale model flexible concrete arches." Bridge and Infrastructure Research in Ireland: Symposium 2006.

Cited by

  1. Evaluation on Flexural Performance of Precast Decks with Ribbed Joint by FEM vol.20, pp.1, 2016, https://doi.org/10.11112/jksmi.2016.20.1.085
  2. Structural behavior of precast concrete deck with ribbed loop joints in a composite bridge vol.17, pp.4, 2016, https://doi.org/10.12989/sss.2016.17.4.559