DOI QR코드

DOI QR Code

Influence of Grain Growth Inhibitors and Co in Nano WC Materials

나노 텅스텐 카바이드 재료 내 입성장 억제제와 코발트의 영향

  • Lim, Hyung Sup (School of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Hur, Man Gyu (School of Interdisciplinary Program in Photovoltaic System Engineering, Sungkyunkwan University) ;
  • Kim, Deug Joong (School of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Yoon, Dae Ho (School of Advanced Materials Science & Engineering, Sungkyunkwan University)
  • 임형섭 (성균관대학교 신소재공학과) ;
  • 허만규 (성균관대학교 태양광시스템협동과정) ;
  • 김득중 (성균관대학교 신소재공학과) ;
  • 윤대호 (성균관대학교 신소재공학과)
  • Received : 2014.08.29
  • Accepted : 2014.09.16
  • Published : 2014.09.30

Abstract

Influences of Co and inhibitors from nano-sized WC materials were observed in the sintering process. VC and $Cr_3C_2$ were used as inhibitors. The crystal structure and surface images of sintered nano-sized WC materials, as functions of Co and inhibitors, were evaluated by XRD and FE-SEM analyses. The relative densities of sintered nano-sized WC materials did not change even with increased quantity of Co and increased temperature. The density of sintered nano-sized WC materials with inhibitors was lower than that of sintered nano-sized WC materials without inhibitors. No difference in hardness due to change of inhibitors was found.

Keywords

References

  1. S. Hewitt, T. Laoui, and K. Kibble, "Effect of Milling Temperature on the Synthesis and Consolidation of Nanocomposit WC-10Co Powders," Int. J. Refract. Met. H., 27 [1], 66-73 (2009). https://doi.org/10.1016/j.ijrmhm.2008.03.007
  2. Z. Guo, J. Xiong, M. Yang, X. Song, and C. Jiang, "Effect of $Mo_2C$ on Microstructre and Properties of WC-TiC-Ni Cemented Carbide," Int. J. Refract. Met. H., 26 [6], 601-05 (2008). https://doi.org/10.1016/j.ijrmhm.2008.01.007
  3. A. Bock, W. D. Schubert, and B. Lux, Powder Metall; pp. 20-26, Vol. 24, 1992.
  4. J. J. Johnson, "An Investigation of Group IV, V, VI Carbides as Grain Growth Inhibitors in Cemented Carbides(in USA)," Thesis, Grorigia Institute of Technology, 1980.
  5. B. Wittmann, W. D. Schubert, and B. Lux, "WC Grain Growth and Grain Growth Inhibition in Nickel and Iron Binder Hardmetals," Int. J. Refract. Met. H., 20, 51-60 (2002). https://doi.org/10.1016/S0263-4368(01)00070-1
  6. G. S. Upadhyaya, "Materials Science of Cemented Carbides -An Overview," Mater. Design, 22, 483-89 (2001). https://doi.org/10.1016/S0261-3069(01)00007-3
  7. C. W. Morton, D. J. Wills, and K. Stjernberg, "The Temperature Ranges for Maximum Effectiveness of Grain Growth Inhibitors in WC-Co Alloys," Int. J. Refract. Met. H., 23 [4-6], 287-93 (2005). https://doi.org/10.1016/j.ijrmhm.2005.05.011
  8. W. Jonathan, J. Sven, A. Hans-Olof, and W. Goran, "Transition Metal Solubilities in WC in Cemented Carbide Materials," J. Am. Ceram. Soc., 94 [2], 605-10 (2011). https://doi.org/10.1111/j.1551-2916.2010.04122.x
  9. Z. Fang and J. W. Eason, "Study of Nanostructured WC-Co Composites," Int. J. Refract. Met. H., 13 [5], 297-303 (1995). https://doi.org/10.1016/0263-4368(95)92675-A
  10. F. Arenas, I. B. de Arenas, J. Ochoa, and S. -A. Cho, "Influence of VC on the Microstructure and Mechanical Properties of WC-Co Sintered Cemented Carbides," Int. J. Refract. Met. H., 17 [1-3], 91-97 (1999). https://doi.org/10.1016/S0263-4368(98)00061-4
  11. J. Zackrisson, B. Jasson, G. S. Uphadyaya, and H. -O. Andren "WC-Co Based Cemented Carbides with Rarge $Cr_3C_2$ Additions," Int. J. Refract. Met. H., 16 [1-6], 417-22 (1998). https://doi.org/10.1016/S0263-4368(98)00048-1
  12. Y.-J. Park, N.-M. Hwang, and D. Y. Yoon, "Abnormal Growth of Faceted (WC) Grains in a (Co) Liquid Matrix," Metall. Mater. Trans., 27A, 1-11 (1996).
  13. H. R. Lee, D. J. Kim, N. M. Hwang, and D.-Y. Kim, "Role of Vanadium Carbide Additive during Sintering of WC-Co: Mechanism of Grain Growth Inhibition," J. Am. Ceram. Soc., 86 [1], 152-54 (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03293.x

Cited by

  1. 오일샌드 플랜트용 초경합금과 스테인레스강의 진공브레이징 특성평가 vol.19, pp.3, 2014, https://doi.org/10.5293/kfma.2016.19.3.048