Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Thermal Shock Resistance Property of TaC Added Ti(C,N)-Ni Cermets

TaC 첨가 Ti(C,N)-Ni 서멧의 내열충격 특성

  • Shin, Soon-Gi (Department of Advanced Materials Engineering, College of Samcheok, Kangwon National University)
  • 신순기 (강원대학교 신소재공학과)
  • Received : 2014.07.13
  • Accepted : 2014.08.29
  • Published : 2014.10.27
Download PDF
⟨ Previous Next ⟩

Abstract

Thermal shock resistance property has recently been considered to be one of the most important basic properties, in the same way that the transverse-rupture property is important for sintered hard materials such as ceramics, cemented carbides, and cermets. Attempts were made to evaluate the thermal shock resistance property of 10 vol% TaC added Ti(C,N)-Ni cermets using the infrared radiation heating method. The method uses a thin circular disk that is heated by infrared rays in the central area with a constant heat flux. The technique makes it possible to evaluate the thermal shock strength (Tss) and thermal shock fracture toughness (Tsf) directly from the electric powder charge and the time of fracture, despite the fact that Tss and Tsf consist of the thermal properties of the material tested. Tsf can be measured for a specimen with an edge notch, while Tss cannot be measured for specimens without such a notch. It was thought, however, that Tsf might depend on the radius of curvature of the edge notch. Using the Tsf data, Tss was calculated using a consideration of the stress concentration. The thermal shock resistance property of 10 vol% TaC added Ti(C,N)-Ni cermet increased with increases in the content of nitrogen and Ni. As a result, it was considered that Tss could be applied to an evaluation of the thermal shock resistance of cermets.

Keywords

References

  1. I. Miyake and T. Tanase, Cemented Carbide and Sintered Hard Materials(Basic and Applications) (ed. H. Suzuki), Maruzen Co., Tokyo, Japan (1986), p. 307.
  2. T. K. Gupta, J. Am. Ceram. Soc., 55, 249 (1972). https://doi.org/10.1111/j.1151-2916.1972.tb11273.x
  3. G. Hierl and E. Wartenberg, Glastech. Ber., 62, 158 (1889).
  4. M. Ogawa, S. G. Shin and H. Matsubara, T. Goyama, G. Teruuchi, Proc. 1996 Ann. Met. JSME/MMD (ed. Mater. Mech. Div.), Jpn. Soc. Mech. Eng., Tsu, Japan (1996), p.323.
  5. R. L. Fullman, J. Metals, 3, 447 (1953).
  6. S. G. Shin, Ph. D. Thesis (in Japanese), University of Tokyo, Tokyo (1992), p.68.
  7. J. Nakamura, Ceramics, 8, 343 (1973).
  8. S. Sato, K. Sato, Y. Imamura and J. Carbon, 13, 309 (1975). https://doi.org/10.1016/0008-6223(75)90035-4
  9. H. Awaji and S. Sato, J. Str. Mater. Soc. Jpn., 13, 78 (1987).
  10. N. N. Parikh and M. Humenik, J. Am. Ceram. Soc., 40, 315 (1957). https://doi.org/10.1111/j.1151-2916.1957.tb12628.x
  11. M. Yamaie and M. Satahiro, J. Jpn. Soc. Pow. Pow. Metall., 16, 190 (1969). https://doi.org/10.2497/jjspm.16.190
  12. H. Suzuki and K. Hayashi, S. Terada, J. Jpn. Inst. Met., 35, 936 (1971).
  13. H. Matsubara, S. G. Shin and T. Sakuma, Mater. Trans. JIM, 32(10), 951 (1991). https://doi.org/10.2320/matertrans1989.32.951
  14. H. Suzuki and H. Matsubara, J. Jpn. Soc. Pow. Pow. Metall., 31, 51 (1984). https://doi.org/10.2497/jjspm.31.51
  15. T. Yamamoto, H. Tatsuya, F. Takayanagi and K. Ueno, J. Jpn. Soc. Pow. Pow. Metall., 40(1), 33 (1993). https://doi.org/10.2497/jjspm.40.33