한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제22권7호
  • /
  • Pages.152-157
  • /
  • 2014
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

벨로우즈 자동 모델링과 구조해석

Automated Modeling and Structure Analysis of Bellows

  • 이승우 (안동대학교 대학원 기계공학과) ;
  • 양철호 (안동대학교 기계자동차공학과)
  • Lee, Seungwoo (Department of Mechanical Engineering, Graduate School, Andong National University) ;
  • Yang, Chulho (Department of Mechanical & Automotive Engineering, Andong National University)
  • 투고 : 2014.06.17
  • 심사 : 2014.06.27
  • 발행 : 2014.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pro-program function of Pro/E has been utilized to expedite the design process of bellows. Design parameters selected for bellows design are manipulated to obtain the shapes user specified. User-oriented function may automate the bellows design process and this function may enable to reduce the design time remarkably. Generated bellows solid model has been applied to study of design sensitivity and optimum design. Among the selected design parameters, thickness of bellows affects system response most. Control-ring installed bellows may reduce the stress and prove to be an effective element for heavy load. The finite element analysis results combined with 3D model generated by pro-program may provide the feasible design directions to the bellows designer.

키워드

참고문헌

  1. S. Oh, C. Suh, Y. Jung and Y. Kim, "Shape Optimization of Multilayer Bellows by Using Sequential Experimental Design," Transactions of KSME, Vol.35, No.9, pp.1007-1013, 2007. https://doi.org/10.3795/KSME-A.2011.35.9.1007
  2. J. Kim, S. Ko, K. Kim and D. Kim, "A Vibration Analysis Model for Bellows in the Vehicle Exhaust System Using Reduced Method of Degree of Freedom," KSAE Spring Conference Proceedings, pp.2183-2188, 2006.
  3. W. Rha, M. Kim and Y. Oh, "A Study on Structural Analysis of Bellows for Automotive," Transactions of KSMT, Vol.13, No.6, pp.102-106, 2004.
  4. M. Han, J. Ahn and C. Yang, "Study on Optimum Shape of Expansion Joint," Transactions of KSAE, Vol.21, No.2, pp.154-158, 2013. https://doi.org/10.7467/KSAE.2013.21.2.154
  5. H. S. Kim, H. J. Kim, H. K. Kim and J. Lee, "Shape Optimum Design of Ship's Bellows Using Statistical Method," Transactions of KSOE, Vol.21, No.5, pp.55-60, 2007.
  6. Pro/Mechanica Users Manual, Wildfire Ver.5, PTC, Needham, MA, 2011.
  7. Minitab Users Manual, R14, Mnitab Inc., State College, PA, 2010.