DOI QR코드

DOI QR Code

재제조된 노후 디젤엔진의 수소첨가에 따른 출력 및 배출가스 특성

The Engine Performance and Emission Characteristics of Remanufactured Diesel Engine by Hydrogen Enrichment

  • 투고 : 2014.09.30
  • 심사 : 2014.10.31
  • 발행 : 2014.10.30

초록

The remanufacturing industry for automotive parts is a major issue which affects the environment protection and CO2 reduction throughout the world. Beside this, remanufacturing technologies of worn-out diesel engines have been developing to make as close to new as possible. In this study, the characteristics of the engine-power output and exhaust emissions of remanufactured diesel engine by hydrogen enrichment are evaluated by measuring the engine and vehicle test. Moreover, with worn-out diesel engine and first generation common-rail engine, we compared by testing their characteristics, resulting in the restoration of engine-power output more than 93%, as well as marvelously reduces the THC and NOx emission. At a guess, high pressure injection of diesel increases fuel atomization characteristics with excellence combustion efficiency, resulting in reduction of THC emission. Also, rapid cooling of EGR decreases combustion temperature, resulting in reduction of NOx emission. Consequently, these remanufacturing for diesel engine enables worn-out diesel engine to have restoration to the original state. Simultaneously achieved 2 goals called that CO2 emission reduction and protection of environment by remanufacturing engine.

키워드

참고문헌

  1. N. H. Chung, H. H. Lee, "Development of Performance Evaluation System for an Automotive Remanufactured Starter", Transactions of KSAE, Vol, No. pp.1567-1572, 2008.
  2. H. S. Mok, C. S. Jeon, C. H. Han, S. J. Park, Hoon Sagong, Seliger Günther, "Remanufacturing Industry for Automobile Parts of European", Transactions of KSAE, Vol. 19, No. 1, pp.38-44, 2011.
  3. H. S. Mok, C. S. Jeon, C. H. Han, Steven J. Skerlos, "Remnaufacturing for Automotive Electronics Control Parts", Transactions of KSAE, Vol. 21, No. 2, pp.1-8, 2013.
  4. H. S. Mok, C. S. Jeon, C. H. Han, M. J. Song, B. S. Park, H. S. Kwak and S. J. Park, "A Study on Remanufacturing Industry for Automobile Parts", Transactions of KSAE, Vol.16, No.6, pp.184-191, 2008.
  5. H. S. Mok, C. S. Jeon, C. H. Han, Skerlos, S, H. J. Kim and K. C. Lee, "Remanufacturing Industry for Automobile Parts of USA," Journal of the Korean Society for Precision Engineering, Vol.27, No.3, pp.58-65, 2011.