DOI QR코드

DOI QR Code

A Study on the Mechanical Properties of Composite Materials of Polyurethane Resin and CuO

PUR/CuO 복합재료의 기계적 특성 연구

  • Kim, Eun-Bong (Department of Control & Mechanical Engineering, Pukyong National University) ;
  • Koo, Su-Jin (Institute of Defense Science & Technology, Pukyong National University) ;
  • Jeong, Sang-Gu (Department of Chemical Engineering, Pukyong National University) ;
  • Kim, Seok-Hyeon (Department of Chemical Engineering, Pukyong National University)
  • 김은봉 (부경대학교 제어기계공학과) ;
  • 구수진 (부경대학교 방위과학기술연구소) ;
  • 정상구 (부경대학교 화학공학과) ;
  • 김석현 (부경대학교 화학공학과)
  • Received : 2014.07.03
  • Accepted : 2014.09.10
  • Published : 2014.10.31

Abstract

For the purpose of development of polyurethane sealing material, polyurethane resins reinforced with CuO were prepared from polyol and MOAC(4,4'-Methylenebis(2-chlorobenzeneamine)). And the effects of compositions on the mechanical properties of the reinforced polyurethane resin were experimentally examined. The polyurethane resin got to be thermally decomposed at $260^{\circ}C$ and completely carbonized around $500^{\circ}C$. Tensile strength, elongation and hardness of the polyurethane resin increased with the content of MOCA. CuO was uniformly dispersed in the polyurethane resin by 1 minute's ultrasonic radiation. Tensile strength, elongation and hardness of the polyurethane resin reinforced with CuO increased with the content of CuO. Tensile strength and hardness of the reinforced polyurethane resin increased with particle size of the CuO, but elongation decreased. CuO showed higher tensile strength and hardness than any other additives, and lowest elongation.

Keywords

References

  1. H. J. Jeon, K. S. Kim, B. N. Seong, B. H. Jo, 1986, "The Physical and Chemical Dictionary", Beop-Gyong Co, pp. 1317.
  2. Kirk Othmer, 1984, "Encyclopedia of Chemical Technology", Wiley Interscience, Vol. 11, pp. 98.
  3. J. D. Lee & H. T. Cho, 1992, "Effect of Composition and Polymerization Rate on the Structure and Properties Polyurethane/Polystyrene IPN(I)", J. Kor. Fiber Soc., 29(8), pp. 79.
  4. D. H. Kim, O. J. Kwon, S. R. Yang, J. S. Park & B. C. Chun, 2007, "Structure, Thermal, and Mechanical Properties of Polyurethane Foams Prepared with Starch as the main Component of Polyol", Fibers and Polymers, 8(2), pp. 155. https://doi.org/10.1007/BF02875785
  5. D. H. Kim, O. J. Kwon, S. R. Yang & J. S. Park, 2007, "Preparation of Starch-based Polyurethane Films and Their Mechanical Properties", Fibers and Polymers, 8(3), pp. 249. https://doi.org/10.1007/BF02877266
  6. J. Y. Kwon, M. M. Rahman & H. D. Kim, 2006, "Preparation and Properties of Crosslinkable Waterborne Polyurethanes Containing Aminoplast - Effect of Curing Condition-", Fibers ad Polymers, 7(2), pp. 95. https://doi.org/10.1007/BF02908252
  7. S. I. Lee, D. B. Kim, J. H. Sin, Y. S. Lee & C. W. Nah, 2007, "Polyurethane/silica Composites, Prepared Via in-situ Polymerization in the Presence of Chemically Modified Silicas", J. Ind. Eng. Chem., 13(5), pp. 786.
  8. M. G. Hong, Y. T. Shin, J. J. Choi, W. K. Lee, G. B. Lee, B. W. Yoo, M. G. Lee & K. C. Song, 2010, "Preparation of Silylated Waterborne Polyurethane/Silica Nanocomposites Using Colloidal Silica", Kor. Chem. Eng. Res., 48(5), pp. 561.
  9. D. R. Kang, 2012, "Preparation and Characterization of Lightweight Fillers and Inorganic Flame Retardants are Added Polyurethane Composite Foam", J. Kor. Academia-Industrial Cooperation Soc., 13(3), pp. 955. https://doi.org/10.5762/KAIS.2012.13.3.955
  10. M. J. Kang, M. S. Han, Y. H. Kim and W. Y. Kim, 2009, The Poly. Soc. of Kor. research paper abs., 209, pp. 41.
  11. Harry R. Allcock and James E. Mark, 2004, "Contemporary Polymer Chemical", SciTech, pp. 681.

Cited by

  1. A Study on the Preparation and Mechanical Properties of Poly-DCPD Type Epoxy Resin vol.29, pp.5, 2017, https://doi.org/10.13000/JFMSE.2017.29.5.1633
  2. A Study on the Properties of Inorganic Fillers of Poly-DCPD Type a Composite Epoxy Resin vol.30, pp.2, 2018, https://doi.org/10.13000/JFMSE.2018.04.30.2.643