DOI QR코드

DOI QR Code

An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups

  • 투고 : 2013.05.10
  • 심사 : 2013.11.01
  • 발행 : 2014.11.25

초록

In this paper, an Adaptive nerou-based inference system (ANFIS) is being used for the prediction of shear strength of high strength concrete (HSC) beams without stirrups. The input parameters comprise of tensile reinforcement ratio, concrete compressive strength and shear span to depth ratio. Additionally, 122 experimental datasets were extracted from the literature review on the HSC beams with some comparable cross sectional dimensions and loading conditions. A comparative analysis has been carried out on the predicted shear strength of HSC beams without stirrups via the ANFIS method with those from the CEB-FIP Model Code (1990), AASHTO LRFD 1994 and CSA A23.3 - 94 codes of design. The shear strength prediction with ANFIS is discovered to be superior to CEB-FIP Model Code (1990), AASHTO LRFD 1994 and CSA A23.3 - 94. The predictions obtained from the ANFIS are harmonious with the test results not accounting for the shear span to depth ratio, tensile reinforcement ratio and concrete compressive strength; the data of the average, variance, correlation coefficient and coefficient of variation (CV) of the ratio between the shear strength predicted using the ANFIS method and the real shear strength are 0.995, 0.014, 0.969 and 11.97%, respectively. Taking a look at the CV index, the shear strength prediction shows better in nonlinear iterations such as the ANFIS for shear strength prediction of HSC beams without stirrups.

키워드

과제정보

연구 과제 주관 기관 : University of Malaya High Impact Research

참고문헌

  1. Abraham, A. (2005), Rule-based expert systems, Sydenham PH, Thorn R Handbook of measuring system design, Wiley, New York.
  2. ACI. (2008), American Concrete Institute, Detroit, Vol. ACI Committee 318.
  3. Ahmad, S.H., Khaloo, A.R. and Poveda, A. (1986), "Shear capacity of reinforced concrete beams", ACI J., 82, 297-305.
  4. Ahmed, S.H and Lue, D.M. (1987), "Flexure-shear interaction of reinforced high-strength concrete beams", ACI Struct. J., 330-341.
  5. Ali, S. (2001), Flexural and shear behavior of high-strength concrete beams, MSc Thesis, Taxila University.
  6. Berg F.J. (1962), "Shear strength of reinforced concrete beams without web reinforcement", ACI J., 59, 1587-1599.
  7. Bukhari, I.A. and Ahmad, S. (2007), "Evaluation of shear strength of high-strength concrete beams without Stirrups", Arabian J. Sci. Eng., 33, 321-336.
  8. Choi, K.K., Sherif, A.G., Reda Taha, M.M. and Chung, L. (2009), "Shear strength of slender reinforced concrete beams without web reinforcement: A model using fuzzy set theory", Eng Struct., 31, 768-777. https://doi.org/10.1016/j.engstruct.2008.11.013
  9. Clair, A. and Sinha, S. (2011), "Development and the comparison of a weighted factor and fuzzy inference model for performance prediction of metallic water pipelines", Proceedings of the Pipelines, 24-32. doi: 10.1061/41187(420)3
  10. Elahi, A. (2003), Effect of reinforcement ratio and shear span on shear strength of high-strength concrete beams, MSc Thesis, Taxila University.
  11. Gopalakrishnan, K. and Ceylan, H. (2009), "Adaptive neuro-fuzzy inference system-based backcalculation approach to airport pavement structural analysis", Proceedings of the Material Design, Construction, Maintenance, and Testing of Pavements, 9-16.doi: 10.1061/41045(352)2
  12. Hakim, S.J.S., Noorzaei, J., Jaafar, M.S., Jameel, M. and Mohammadhassani, M. (2011), "Application of artificial neural networks to predict compressive strength of high strength concrete", Int. J. Phys. Sci., 6(5), 975-981.
  13. Herrera, F. and Lozano, M. (2003), "Fuzzy adaptive genetic algorithm: design, taxonomy, and future directions", Soft Comput., 7, 545-562. https://doi.org/10.1007/s00500-002-0238-y
  14. Jang, J.S.R. (1993), "ANFIS: Adaptive network based fuzzy inference system", IEEE T. Syst. Man Cy., 23(3), 665-685. https://doi.org/10.1109/21.256541
  15. Kani, G.N.J. (1964), "The riddle of shear failure and its solution", ACI J., 61, 441-467.
  16. Khan, M., Rossow, E. and Shah, S. (2000), "Shear design of high strength concrete beams", Adv. Technol. Struct. Eng., 1-9. doi: 10.1061/40492(2000)167 .
  17. Li, L., Song, G. and Ou, J. (2013), "A nonlinear structural experiment platform with adjustable plastic hinges: analysis and vibration control", Smart Struct. Syst., 11(3), 315-329. https://doi.org/10.12989/sss.2013.11.3.315
  18. Lee, J.Y. and Kim, U.Y. (2008), "Effect of longitudinal tensile reinforcement ratio and shear span-depth ratio on minimum shear reinforcement in beams", ACI Struct. J., 105(2), 134-144.
  19. Mashrei Mohammed, A , Nabeel, A., Y, A.T. and M.S, R. (2010), "Neural networks model and adaptive neuro-fuzzy inference system for predicting the moment capacity of ferrocement members", Eng. Struct., 32(6), 1723-1724. https://doi.org/10.1016/j.engstruct.2010.02.024
  20. Mamdani, E. and Assilian, S. (1975), "An experiment in linguistic synthesis with a fuzzy logic controller", Int. J. Man Mach. Stud., 7(1), 1-13. https://doi.org/10.1016/S0020-7373(75)80002-2
  21. Mohammadhassani, M., Jumaat, M.Z., Chemrouk, M., Maghsoudi, A.A., Jameel, M. and Akib, S. (2011), "An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams", Nucl. Eng. Des., 241(6), 2060-2067.. https://doi.org/10.1016/j.nucengdes.2011.02.022
  22. Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M.Z., Jameel, M., Hakim, S.J.S. and Zargar, M. (2013), "Application of the ANFIS model in deflection prediction of concrete deep beams", Struct. Eng. Mech., 45(3), 323-336. https://doi.org/10.12989/sem.2013.45.3.323
  23. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2013a), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. DOI: http://dx.doi.org/10.12989/sem.2013.46.6.853
  24. Mohammadhassani, M., Nezamabadi-pour, H., Jameel, M. and Karim, G. (2013b), "Applications of the ANFIS and LR in the prediction of strain in tie section of concrete deep beams", Comput. Concrete, 12(3), 243-259. DOI: http://dx.doi.org/10.12989/cac.2013.12.3.243
  25. Mohammadhassani, M., Nezamabadi-pour, H. Jumaat, M.Z., Jameel, M. and Arumugam, A.M.S. (2013c), "Application of artificial neural networks (ANNs) and linear regressions (LR) to predict the deflection of concrete deep beams", Comput. Concrete, 11(3), 237-252. https://doi.org/10.12989/cac.2013.11.3.237
  26. Ren, L., Xiang, X. and Ni, J. (2011). "Forecast modeling of monthly runoff with adaptive neural fuzzy inference system and wavelet analysis", J. Hydrol. Eng., 10.1061/(ASCE)HE.1943-5584.0000514 (Sep. 28, 2011).
  27. Shiri, J., Makarynskyy, O., Kisi, O., Dierickx, W. and Fard, A. (2011). "Prediction of short-term operational water levels using an adaptive neuro-fuzzy inference system", J. Waterw. Port. C. Ocean Eng., 137(6), 344-354. Technical notes. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000097
  28. Reddy, L.S., Ramana Rao, .N.V and Gunneswara Rao, T.D. (2010), "Shear resistance of high strength concrete beams without shear reinforcement", Int J. Civil. Struct. Eng., 1, 101-113.
  29. Sun, B. and Qiu, Y. (2010), "Fuzzy expert system for flexible pavements crack performance prediction", ICLEM 2010, 2415-2421. doi: 10.1061/41139(387)337
  30. Takagi, T. and Sugeno, M. (1985), "Fuzzy identification of systems and its applications to modeling and control", IEEE T. Syst. Man. Cy., 35(1), 116-132.
  31. Voo, Y., Poon, W. and Foster, S. (2010), "Shear strength of steel fiber-reinforced ultrahigh- performance concrete beams without stirrups", J. Struct. Eng. - ASCE, 136(11), 1393-1400. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000234
  32. Wafa Faisal, F. and AShour Samir, A. (1994), "Shear behavior of reinforced high-strength concrete beams without shear reinforcement", Eng. J. Qatar Univ., 7, 91-113.
  33. Yaqub, M. (2002), Shear behavior of high-strength concrete beams without shear reinforcement, MSc Thesis, Taxila University.
  34. Yang, K.H., Chung, H.S. and Ashour, A.F. (2007), "Influence of section depth on the structural behaviour of reinforced concrete continuous deep beams", Mag. Concrete Res., 59(8), 575-586. https://doi.org/10.1680/macr.2007.59.8.575
  35. Zadeh, L.A. (1965), "Fuzzy sets", Inform. Control, 8(3), 338-353. https://doi.org/10.1016/S0019-9958(65)90241-X
  36. Zeidan, M., Barakat, M., Mahmoud, Z. and Khalifa, A. (2011), "Evaluation of concrete shear strength for FRP reinforced beams", Proceedings of the Structures Congress, 1816-1826. doi: 10.1061/41171(401)158

피인용 문헌

  1. Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.679
  2. Rock brittleness prediction through two optimization algorithms namely particle swarm optimization and imperialism competitive algorithm pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0648-9
  3. An intelligent based-model role to simulate the factor of safe slope by support vector regression pp.1435-5663, 2019, https://doi.org/10.1007/s00366-018-0677-4
  4. Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00701-8
  5. A novel intelligent approach to simulate the blast-induced flyrock based on RFNN combined with PSO pp.1435-5663, 2019, https://doi.org/10.1007/s00366-019-00707-2
  6. Effects of a proper feature selection on prediction and optimization of drilling rate using intelligent techniques pp.1435-5663, 2020, https://doi.org/10.1007/s00366-019-00711-6
  7. An integral based fuzzy approach to evaluate waste materials for concrete vol.19, pp.3, 2014, https://doi.org/10.12989/sss.2017.19.3.323
  8. Dynamic mix design optimization of high-performance concrete vol.29, pp.1, 2014, https://doi.org/10.12989/scs.2018.29.1.067
  9. Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.525
  10. Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium vol.66, pp.6, 2014, https://doi.org/10.12989/sem.2018.66.6.737
  11. Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake vol.28, pp.4, 2014, https://doi.org/10.12989/scs.2018.28.4.439
  12. Strengthening of bolted shear joints in industrialized ferrocement construction vol.28, pp.6, 2014, https://doi.org/10.12989/scs.2018.28.6.681
  13. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2014, https://doi.org/10.12989/sss.2018.22.5.575
  14. Prediction of visitors' thermal comfort in open urban areas vol.59, pp.4, 2014, https://doi.org/10.5937/zasmat1804495g
  15. Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame vol.2019, pp.None, 2014, https://doi.org/10.1155/2019/2519640
  16. Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer vol.23, pp.1, 2014, https://doi.org/10.12989/cac.2019.23.1.061
  17. Computational and experimental analysis of beam to column joints reinforced with CFRP plates vol.30, pp.3, 2014, https://doi.org/10.12989/scs.2019.30.3.271
  18. Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping vol.30, pp.5, 2019, https://doi.org/10.12989/scs.2019.30.5.417
  19. Behavior of steel storage pallet racking connection - A review vol.30, pp.5, 2019, https://doi.org/10.12989/scs.2019.30.5.457
  20. Assessment of electronic system for e-patent application and economic growth prediction vol.520, pp.None, 2014, https://doi.org/10.1016/j.physa.2019.01.009
  21. Evaluation and comparison of GRP and FRP applications on the behavior of RCCs made of NC and HSC vol.23, pp.5, 2014, https://doi.org/10.12989/sss.2019.23.5.495
  22. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2014, https://doi.org/10.12989/sem.2019.70.5.639
  23. Intelligent design of retaining wall structures under dynamic conditions vol.31, pp.6, 2014, https://doi.org/10.12989/scs.2019.31.6.629
  24. Prediction of rock interlocking by developing two hybrid models based on GA and fuzzy system vol.35, pp.4, 2014, https://doi.org/10.1007/s00366-018-0672-9
  25. The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate vol.24, pp.4, 2014, https://doi.org/10.12989/sss.2019.24.4.541
  26. Application of waste tire rubber aggregate in porous concrete vol.24, pp.4, 2014, https://doi.org/10.12989/sss.2019.24.4.553
  27. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete vol.8, pp.3, 2014, https://doi.org/10.12989/acc.2019.8.3.225
  28. Predicting the shear strength of reinforced concrete beams using Artificial Neural Networks vol.24, pp.5, 2019, https://doi.org/10.12989/cac.2019.24.5.469
  29. Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete vol.9, pp.24, 2019, https://doi.org/10.3390/app9245534
  30. Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils vol.19, pp.6, 2014, https://doi.org/10.12989/gae.2019.19.6.473
  31. Strain rate effects on soil-geosynthetic interaction in fine-grained soil vol.19, pp.6, 2014, https://doi.org/10.12989/gae.2019.19.6.533
  32. Depiction of concrete structures with seismic separation under faraway fault earthquakes vol.9, pp.1, 2020, https://doi.org/10.12989/acc.2020.9.1.071
  33. Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load vol.20, pp.2, 2014, https://doi.org/10.12989/gae.2020.20.2.087
  34. Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber vol.20, pp.3, 2014, https://doi.org/10.12989/gae.2020.20.3.191
  35. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2014, https://doi.org/10.12989/scs.2020.34.3.347
  36. Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.467
  37. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2014, https://doi.org/10.12989/scs.2020.34.5.743
  38. Novel approach for forecasting the blast-induced AOp using a hybrid fuzzy system and firefly algorithm vol.36, pp.2, 2014, https://doi.org/10.1007/s00366-019-00725-0
  39. A Monte Carlo simulation approach for effective assessment of flyrock based on intelligent system of neural network vol.36, pp.2, 2014, https://doi.org/10.1007/s00366-019-00726-z
  40. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2014, https://doi.org/10.12989/acc.2020.9.4.355
  41. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2014, https://doi.org/10.12989/scs.2020.35.2.187
  42. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2014, https://doi.org/10.12989/scs.2020.35.2.187
  43. Performance assessment of buckling restrained brace with tubular profile vol.8, pp.4, 2020, https://doi.org/10.12989/anr.2020.8.4.323
  44. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.567
  45. Analysis of the Effect of Kevlar Fibers on Abrasion Resistance, Flexural Strength and Hydraulic Conductivity Coefficient of Silica Fume Concretes vol.44, pp.2, 2014, https://doi.org/10.1007/s40996-020-00396-8
  46. Developing new tree expression programing and artificial bee colony technique for prediction and optimization of landslide movement vol.36, pp.3, 2014, https://doi.org/10.1007/s00366-019-00754-9
  47. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2014, https://doi.org/10.12989/sss.2020.26.1.103
  48. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2014, https://doi.org/10.12989/sss.2020.26.1.103
  49. A model to develop the porosity of concrete as important mechanical property vol.26, pp.2, 2014, https://doi.org/10.12989/sss.2020.26.2.147
  50. Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems vol.22, pp.5, 2014, https://doi.org/10.12989/gae.2020.22.5.397
  51. Developing a hybrid adoptive neuro-fuzzy inference system in predicting safety of factors of slopes subjected to surface eco-protection techniques vol.36, pp.4, 2014, https://doi.org/10.1007/s00366-019-00768-3
  52. The effects of ABC, ICA, and PSO optimization techniques on prediction of ripping production vol.36, pp.4, 2014, https://doi.org/10.1007/s00366-019-00770-9
  53. Project planning and risk management as a success factor for IT projects in agricultural schools in Serbia vol.63, pp.None, 2014, https://doi.org/10.1016/j.techsoc.2020.101371
  54. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2014, https://doi.org/10.12989/acc.2020.10.5.393
  55. Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion vol.28, pp.None, 2014, https://doi.org/10.1016/j.istruc.2020.10.026
  56. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2014, https://doi.org/10.12989/sss.2020.26.6.781
  57. In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.101
  58. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2014, https://doi.org/10.12989/anr.2021.10.3.295
  59. Feature transfer method for infrared and visible image fusion via fuzzy lifting scheme vol.114, pp.None, 2021, https://doi.org/10.1016/j.infrared.2020.103621
  60. Recent Trends in Prediction of Concrete Elements Behavior Using Soft Computing (2010-2020) vol.28, pp.4, 2014, https://doi.org/10.1007/s11831-020-09500-7
  61. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2014, https://doi.org/10.12989/sss.2021.27.6.1041
  62. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  63. Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.309
  64. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  65. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2014, https://doi.org/10.12989/sss.2021.28.2.167
  66. Machine learning-based prediction and performance study of transparent soil properties vol.28, pp.2, 2021, https://doi.org/10.12989/sss.2021.28.2.289
  67. Development of a Hybrid Artificial Neural Network-Particle Swarm Optimization Model for the Modelling of Traffic Flow of Vehicles at Signalized Road Intersections vol.11, pp.18, 2014, https://doi.org/10.3390/app11188387
  68. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2014, https://doi.org/10.12989/scs.2021.40.6.853
  69. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2014, https://doi.org/10.1007/s10668-021-01382-4
  70. Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm vol.34, pp.None, 2014, https://doi.org/10.1016/j.istruc.2021.09.072
  71. Engine performance fueled with jojoba biodiesel and enzymatic saccharification on the yield of glucose of microbial lipids biodiesel vol.239, pp.no.pd, 2014, https://doi.org/10.1016/j.energy.2021.122390