DOI QR코드

DOI QR Code

Investigation of a new steel-concrete connection for composite bridges

  • 투고 : 2012.07.19
  • 심사 : 2014.03.29
  • 발행 : 2014.11.25

초록

A new type of connection for steel-concrete composite bridges was developed by the Steel Structures Laboratory of Ecole Poytechinque $F{\acute{e}}d{\acute{e}}rale$ de Lausanne. Resistance to longitudinal shear is based on the development of shear stresses in the confined interfaces which form the connection. Confinement is provided by the reinforced concrete slab which encloses the connection and restrains the uplift (lateral separation) of the interfaces by developing normal stresses. The experimental investigation of the interfaces, under static and cyclic loading, enabled the development of the laws describing the structural behaviour of each interface. Those laws were presented by the authors in previous papers. The current paper focuses on the continuity of the research. It presents the experimental investigation on the new connection by means of push-out tests on specimens submitted to static and cyclic shear loading. Investigation revealed that the damage in the connection, due to cyclic loading, is expressed by the accumulation of a residual slip. A safe fatigue failure criterion is proposed for the connection which enabled the verification of the connection for the fatigue limit state with respect to the limit of fatigue. A numerical model is developed which takes into account the laws describing the interface behaviour and the analytical expressions for the confinement effect, the latter obtained by performing finite element analysis. This numerical model predicts the shear resistance of the connection and enables to assess its fatigue limit which is necessary for the fatigue design proposed.

키워드

과제정보

연구 과제 주관 기관 : Swiss National Science Foundation (SNSF)

참고문헌

  1. ABAQUS (2011), Software Package, Simulia, Version 6.11-2.
  2. Centre Suisse de la Construction Metallique (2005), C5/05 steelwork, Tables de construction, Switzerland. [In French]
  3. Eurocode 1, European Standard (2003), Actions on Structures - Part 2: Traffic Loads on Bridges, EN 1991-2.
  4. Eurocode 2, European Standard (2004), Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings, EN 1992-1-1.
  5. Feldmann, M., Hechler, O., Hegger, J. and Rausher, S. (2008), "Fatigue behavior of shear connectors in high performance concrete", Proceedings of the 2008 Composite Construction and in Steel and Concrete Conference VI, Devil's Thumb Ranch, Tabernash, CO, USA, July.
  6. FIB (2010), Model Code 2010
  7. HMB (2000), Inductive Displacement Transducers, Technical brochure.
  8. Kim, H.Y. and Jeong, Y.J. (2010), "Ultimate strength of a steel-concrete composite bridge deck slab with profiled sheeting", Eng. Str., 32(2), 534-546. https://doi.org/10.1016/j.engstruct.2009.10.014
  9. Meystre, T. and Lebet, J-P. (2011), "Modele de charge de trafic actualise pour les dalles de roulement en beton", Provisory Report, OFROU-AGB 2009/005. [In French]
  10. Oh, B.H. and Kim, S.H. (2007), "Realistic models for local bond stress-slip of reinforced concrete under repeated loading", ASCE Struct. Eng. J., 133(2), 224-216.
  11. Papastergiou, D. (2012), "Connections by adhesion, interlocking and friction for steel-concrete composite bridges under static and cyclic loading", EPFL Thesis, No. 3501, Lausanne, Switzerland.
  12. Papastergiou, D. and Lebet, J.P. (2011), "New steel-concrete connection for prefabricated composite bridges", Stahlbau, 80(12), 894-903. https://doi.org/10.1002/stab.201101493
  13. Papastergiou, D. and Lebet, J.P. (2014), "Experimental investigation and modelling of the structural behaviour of confined grouted interfaces for a new steel-concrete connection", Eng. Struct., 74, 180-192. https://doi.org/10.1016/j.engstruct.2014.05.031
  14. Rauscher, S. and Hegger, J. (2008), "Modern composite structures made of high performance materials", Proceedings of the 2008 Composite Construction and in Steel and Concrete Conference VI, Devil's Thumb Ranch, Tabernash, CO, USA, July.
  15. SIA 261 (2003), Registered code of the swiss standards association, Actions on Structures, SN 505 261.
  16. SIA 264 (2003), Registered code of the swiss standards association, Composite Steel and Concrete Structures, SN 505 264.
  17. Thomann, M. and Lebet, J.P. (2007), "Design method for connections by adherence for steel-concrete composite bridges", Struct. Eng. Inter., 17(1), 86-93. https://doi.org/10.2749/101686607779938778
  18. VSL (2002), Grouting of Post-Tensioning Tendons, VSL Series No.5.

피인용 문헌

  1. Experimental investigation and modelling of the structural behaviour of confined grouted interfaces for a new steel–concrete connection vol.74, 2014, https://doi.org/10.1016/j.engstruct.2014.05.031
  2. Design and experimental verification of an innovative steel–concrete composite beam vol.93, 2014, https://doi.org/10.1016/j.jcsr.2013.10.017
  3. Study on mechanical performance of composite beam with innovative composite slabs vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.537
  4. Static Experiment on Mechanical Behavior of Innovative Flat Steel Plate-Concrete Composite Slabs vol.18, pp.2, 2018, https://doi.org/10.1007/s13296-018-0012-3
  5. Detection of flaw in steel anchor-concrete composite using high-frequency wave characteristics vol.31, pp.4, 2014, https://doi.org/10.12989/scs.2019.31.4.341