Computers and Concrete

  • 제16권5호
  • /
  • Pages.703-722
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance assessment of advanced hollow RC bridge column sections

  • Kim, T.H. (Technology Development Team, Samsung Construction & Trading Corporation) ;
  • Kim, H.Y. (Department of Civil Engineering, Yeungnam University) ;
  • Lee, S.H. (Technology Development Team, Samsung Construction & Trading Corporation) ;
  • Lee, J.H. (Department of Civil Engineering, Yeungnam University) ;
  • Shin, H.M. (School of Civil and Architectural Engineering, Sungkyunkwan University)
  • 투고 : 2015.06.12
  • 심사 : 2015.10.30
  • 발행 : 2015.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigates the performance of advanced hollow reinforced concrete (RC) bridge column sections with triangular reinforcement details. Hollow column sections are based on economic considerations of cost savings associated with reduced material and design moments, as against increased construction complexity, and hence increased labor costs. The proposed innovative reinforcement details are economically feasible and rational, and facilitate shorter construction periods. We tested a model of advanced hollow column sections under quasi-static monotonic loading. The results showed that the proposed triangular reinforcement details were equal to the existing reinforcement details, in terms of the required performance. We used a computer program, Reinforced Concrete Analysis in Higher Evaluation System Technology (RCAHEST), for analysis of the RC structures; and adopted a modified lateral confining effect model for the advanced hollow bridge column sections. Our study documents the testing of hollow RC bridge column sections with innovative reinforcement details, and presents conclusions based on the experimental and analytical findings. Additional full-scale experimental research is needed to refine and confirm the design details, especially for the actual detailing employed in the field.

키워드

참고문헌

  1. AASHTO (2012), AASHTO LRFD "Bridge Design Specifications", 6th Edition.
  2. Delgado, P., Vila-Pouca, N., Arede, A., Rocha, P., Costa, A. and Delgado, R. (2008), "Experimental cyclic behavior of hollow-section bridge piers with different transverse reinforcement details", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
  3. Eurocode 2 (2004), Design of Concrete Structures-Part 1: General Rules and Rules for Buildings, EN1992-1, European Committee for Standardization, Brussel.
  4. Han, Q., Zhou, Y., Dum, X., Huang, C. and Lee, G.C. (2014), "Experimental and numerical studies on seismic performance of hollow RC bridge columns", Earthq. Struct., 7(3) 251-269. https://doi.org/10.12989/eas.2014.7.3.251
  5. Hoshikuma, J. and Priestley, M.J.N. (2000), "Flexural behavior of circular hollow columns with a single layer of reinforcement under seismic loading", Report No. SSRP-2000/13, University of California, San Diego, California.
  6. Kim, T.H. (2014), "Structural performance assessment of deteriorated reinforced concrete bridge piers", Comput. Concrete, 14(4), 387-403. https://doi.org/10.12989/cac.2014.14.4.387
  7. Kim, T.H., Choi, J.H., Lee, J.H. and Shin, H.M. (2013), "Performance assessment of hollow RC bridge column sections with reinforcement details for material quantity reduction", Mag. Concrete Res., 65(21), 1277-1292. https://doi.org/10.1680/macr.13.00073
  8. Kim, T.H., Hong, H.K., Chung, Y.S. and Shin, H.M. (2009), "Seismic performance assessment of reinforced concrete bridge piers with lap splices using shaking table tests", Mag. Concrete Res., 61(9), 705-719. https://doi.org/10.1680/macr.2008.61.9.705
  9. Kim, T.H., Kim, Y.J., Kang, H.T. and Shin, H.M. (2007), "Performance assessment of reinforced concrete bridge columns using a damage index", Can. J. Civil Eng., 34(7), 843-855. https://doi.org/10.1139/l07-003
  10. Kim, T.H., Lee, K.M. and Shin, H.M. (2002), "Nonlinear analysis of reinforced concrete shells using layered elements with drilling degree of freedom", ACI Struct. J., 99(4), 418-426.
  11. Kim, T.H., Lee, K.M., Yoon, C.Y. and Shin, H.M. (2003), "Inelastic behavior and ductility capacity of reinforced concrete bridge piers under earthquake. I: theory and formulation", J. Struct. Eng., ASCE, 129(9), 1199-1207. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1199)
  12. Lignola, G.P. (2006), "RC hollow members confined with FRP: experimental behavior and numerical Modeling", Ph.D. Thesis, University of Naples, Italy.
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Ministry of Construction and Transportation (2010), Korea Highway Bridge Design Code.
  15. Papanikolaou, V.K. and Kappos, A.J. (2009), "Numerical study of confinement effectiveness in solid and hollow reinforced concrete bridge piers: methodology", Comput. Struct., 87(21-22), 1427-1439. https://doi.org/10.1016/j.compstruc.2009.05.004
  16. Shirmohammadi, F. and Esmaeily A. (2015), "Performance of reinforced concrete columns under bi-axial lateral force/displacement and axial load", Eng. Struct., 99, 63-77. https://doi.org/10.1016/j.engstruct.2015.04.042
  17. Taylor, R.L. (2000), FEAP-A Finite Element Analysis Program, Version 7.2 Users Manual, 1 and 2.
  18. Yeh, Y.K., Mo, Y.L. and Yang, C.Y. (2002), "Seismic performance of rectangular hollow bridge columns", J. Struct. Eng., ASCE, 128(1), 60-68. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(60)
  19. Yukawa, Y., Ogata, T., Suda, K. and Saito, H. (1999), "Seismic performance of reinforced concrete high pier with hollow section", P. JPN Society Civil Eng., 42(613), 103-120. (in Japanese)
  20. Zahn, F.A., Park, R. and Priestley, M.J.N. (1990), "Flexural strength and ductility of circular hollow reinforced concrete columns without confinement on inside face", ACI Struct. J., 87(2), 156-166.