DOI QR코드

DOI QR Code

Insulation Level Assessment on the Military Residential Facilities Considering the Investment Payback Period

투자회수기간을 고려한 군 주거시설의 단열수준 산정 연구

  • Park, Young Jun (Dept. of Civil Engineering & Environmental Sciences, Korea Military Academy) ;
  • Meang, Joon Ho (Korean Institute of Sustainable Design and Educational Environment) ;
  • Kim, Taehui (Dept. of Architectural Engineering, Mokpo National University) ;
  • Kim, Sung Joong (Korean Institute of Sustainable Design and Educational Environment) ;
  • Lee, Seung-Min (Korean Institute of Sustainable Design and Educational Environment) ;
  • Son, Kiyoung (School of Architectural Engineering, University of Ulsan)
  • Received : 2015.10.02
  • Accepted : 2015.11.11
  • Published : 2015.12.31

Abstract

Purpose: This study, which is based on the investment payback periods, aims to suggest the proper insulation level which can be adapted to the Defense Military Facility Criteria regarding the military residential condominiums. For the energy performance simulation, it is required to collect the residential data regarding the military condominiums and climatic data concerning the regions they belongs to. The estimates through energy performance simulation are the regional heating loads and the heating transmission coefficients of building components. Method: With the heating loads, the annual heating cost saving per square meters is assessed. With the heating transmission coefficients of building components, the additional insulation installment cost per square meters is evaluated. With two outcomes, one as an annual value and the other as a present value, the investment payback period is calculated. Result: In result, it could be concluded that 55~70% insulation ratio can lead a superior residental environments as well as be contributed to the national policy associated with zero-energy buildings because the estimated investment payback period is shorter than the life span of the military residental condominiums. This upshot can be used as a foundation to enactment the Defense Military Facility Criteria associated with military residential condominiums.

Keywords

References

  1. 김종민, "건축물의 단열설계에 관한 연구", 석사학위논문, 삼척대학교, 2006 // (Kim, Jong-Min, "A Study on Thermal Insulation Design of Buildings", Master thesis, Samchok National University, Korea, 2006)
  2. 이태원 (1996), "건축물의 에너지절약 설계기준", 대한설비공학회 학술회의록. 1996 // (Lee, Tae-Won, "Standards for energy conservation in building", Proceeding of The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, Korea, 1996)
  3. Hanzawa, H, Melikov, Arsen Krikor, Fanger, Povl Ole, "Airflow characteristics in the occupied zone of ventilated spaces", ASHRAE Transactions : V.93, 1987
  4. 서성모, 박진철, 이언구, "국내 건물 단열기준에 따른 냉난방부하 분석 및 최적 단열기준에 관한 고찰", 한국태양에너지학회논문집, 제 31권 제 5호, 2011 // (Seo, Sung-mo, Park, Jin-chul, Rhee, Eun-ku, "An Analysis of Thermal Loads Depending on Korea Building Insulation Standard and the Optimum Insulation Standard", Journal of the Korean Solar Energy Society, Korea, Vol.31, No.5, 2011)
  5. 문진우, "강화된 건물 외피 단열기준의 지역별 냉난방에너지 감소 효과", 설비공학논문집 제 23권 제 10호, 2011 // (Moon Jin-Woo, "Impact of Reinforced Standard for Envelope Insulation on the Regional Heating and Cooling Energy Consumption", Korean Journal of Air-Conditioning and Refrigeration Engineering, Korea, Vol.23, No. 10, 2011)
  6. 이성우, "건축물 에너지절약 설계 기준의 강화가 지역난방 공동주택 단위난방열부하에 미치는 영향에 관한 연구", 석사학위논문, 서울과학기술대학교, 2011 // (Lee, Sung-Woo, "Study on Effect of the Unit Heating Load Depend on Change of Energy Saving Design Criteria Standard in Apartment Housings with District Heating", Master thesis, Seoul National University Of Science and Technology, Korea, 2011)
  7. 권경우, 이현정, 박선효, "단열설계 기준의 지역구분에 관한 연구", 한국생태환경건축학회 논문집, 제 13권 제 1호, 2013 // (Kwon, Kyoung-Woo, Lee Hyeon-Jung, Park Sun-Hyo, "A Study on Regional Classification of Insulation Design Code", Journal of the Korea institute of ecological architecture and environment, Korea, Vol.13, No. 1, 2013)
  8. 김호영, "주택 단열성능에 따른 냉난방에너지소비량 시뮬레이션 연구", 석사학위논문, 호서대학교, 2009 // (Kim, Ho-Young, "A Simulation of Cooling and Heating Energy Consumption in a Single House according to Thermal Performance", Master thesis, Hoseo University, Korea, 2009)
  9. 조경민, 이태구, "저에너지 주택설계를 위한 단열구조 및 디자인 요소에 관한 연구", 대한건축학회 논문집, 제 24권 제 2호, 2004 // (Cho, Kyung-Min, Lee, Tea-Goo, "Design Criteria and Construction of thermal Insulation for the Low Energy Housing Plan" Journal of The Architectural Institute of Korea, Korea, Vol.23, No. 2, 2004)
  10. 김정국, 안병립, 장철용, 정학근, 한찬훈, "권역별 난방에너지 요구량 분석을 통한 단열기준 개선방안", 학국생태환경건축학회논문집, 제 13권 제 4호, 2013 // (Kim, Jeong-Gook, Ahn, Byung-Lip, Jang, Cheol-Yong, Jeong, Hak-Geun, Haan, Chan-Hoon, "Improvement Method of Regional Insulation Standard through the Regional Heating Energy Demand Analysis", Journal of the Korea institute of ecological architecture and environment, Korea, Vol.13, No. 4, 2013)
  11. 송수빈, "창호의 단열특성에 따른 공동주택의 에너지절감효과 및 경제성 분석", 석사학위논문, 부산대학교, 2009 // (Song, Su-Bin, "Analysis of Energy Saving Effects of Apartment Housing and Economy Efficiency of Window according to the Thermal Insulation Performance of Windows", Master thesis, Pusan National University, Korea, 2009)
  12. 김덕우, 박철수, "에너지 플러스를 이용한 이중외피 시뮬레이션 결과와 실제 비교", 한국건축친환경설비학회 학술발표대회논문집 : v.2010 n.03, 2010.03 // (Kim, Deuk-Woo, Park Cheol-Soo, "Comparison of an EnergyPlus double-skin simulation results with measurement", Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, 2010.03)
  13. 문진우, "강화된 건물 외피 단열기준의 지역별 냉난방에너지 감소 효과", 설비공학논문집, 제 23권 제 10호, 2011 // (Moon, Jin-Woo, "Impact of Reinforced Standard for Envelope Insulation on the Regional Heating and Cooling Energy Consumption", Korean Journal of Air-Conditioning and Refrigeration Engineering, Korea Vol.23, No. 10, 2011)
  14. ASHRAE Handbook Fundamentals, "Atlanta: American Society of Heating", Refrigerating and Ar-Conditioning Engineers, Inc, 2009
  15. ASHRAE Handbook Fundamentals, "Chapter 8; Thermal comfort", Refrigerating and Ar-Conditioning Engineers, Inc, 2009
  16. US DOE, "Determining Climate Regions by County", Building America Best Practices Series, Vol.7.1, 2010