한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제48권6호
  • /
  • Pages.349-353
  • /
  • 2015
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

아크 용사법을 이용한 Inconel 625 코팅 층의 해수 내 캐비테이션 손상 거동

Cavitation Damage Behavior of Inconel 625 Coating Layer by Arc Thermal Spraying Method in Sea Water

  • 박일초 (목포해양대학교 기관시스템공학부) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • Park, Il-Cho (Division of Marine Engineering, Mokpo National Maritime University) ;
  • Kim, Seong-Jong (Division of Marine Engineering, Mokpo National Maritime University)
  • 투고 : 2015.12.21
  • 심사 : 2015.12.24
  • 발행 : 2015.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, arc thermal spray coating was conducted onto the SS400 steel using Inconel 625 wires in order to improve the durability of marine steel structures, and then investigated cavitation damage behavior of Inconel 625 coating layer in sea water. For the Inconel 625 coating layer, surface hardness appeared similar to that of existing high velocity oxy-fuel coating technology with 380~480 HV, but the porosity of about 6 % was larger relatively. During the cavitation experiment, pit damages were originated and grown at the rough surface and pore defect area of Inconel 625 coating layer. And, after the 72 hours of experimental time, weight loss of Inconel 625 coating layer exhibited gradually increasing tendency due to surface damage effect of the undercut.

키워드

참고문헌

  1. H. Y. Al-Fadhli, J. Stokes, M. S. J.Hashmi, B. S. Yilbas, Surf. Coat. Technol. 200 (2006) 5782. https://doi.org/10.1016/j.surfcoat.2005.08.143
  2. G. Bolelli, L. Lusvarghi, R. Giovanardi, Surf. Coat. Technol. 202 (2008) 4793. https://doi.org/10.1016/j.surfcoat.2008.04.056
  3. D. A. Walsha, L. E. Li, M. S. Bakareb, K. T. Voisey, Electrochim. Acta 54 (2009) 4647. https://doi.org/10.1016/j.electacta.2009.03.057
  4. V. Higuera, F. Belzunce, A. Carriles, S. Poveda, J. Mater. Sci. 37 (2002) 649. https://doi.org/10.1023/A:1013742213115
  5. L. Gil, M. Staia, J. Surf. Eng. 18 (2002) 309. https://doi.org/10.1179/026708401225005377
  6. L. Pawlowski, The science and engineering of thermal spray coatings, 2nd ed., John Wiley & Sons, (2008) 79.
  7. J. S. Kim, J. H. Han, H. P. Kim, Y. S. Lim, D. H. Lee, S. S. Hwang, D. H. Hur, Corros. Sci. Technol. 1 (2002) 320.
  8. T. O. Kim, Y. K. Park, J. M. Yoon, Y. S. Song, J. Kor. Inst. Surf. Eng. 33 (2000) 329.
  9. P. Poza, C. J. Munez, M. A. Garrido-Maneiro, S. Vezzu, S. Rech, A. Trentin, Surf. Coat. Technol. 243 (2014) 51. https://doi.org/10.1016/j.surfcoat.2012.03.018
  10. A. A. Boudi, M. S. J. Hashmi, B. S. Yilbas, J. Mater. Process. Technol. 173 (2006) 44. https://doi.org/10.1016/j.jmatprotec.2005.11.014
  11. A. A. Boudi, M. S. J. Hashmi, B. S. Yilbas, J. Mater. Process. Technol. 155-156 (2004) 2051. https://doi.org/10.1016/j.jmatprotec.2004.04.146
  12. S. J. KIM, S. J. LEE, Trans. Nonferrous Met. Soc. China 21 (2011) 2798. https://doi.org/10.1016/S1003-6326(11)61126-6
  13. K. M. Moon, J. H. Shin, M. H. Lee, S. Y. Lee, Y. H. Kim, J. Korean Soc. of Marine Engineering, 34 (2010) 670. https://doi.org/10.5916/jkosme.2010.34.5.670
  14. H. M. Hawthorne, B. Arsenault, J. P. Immarigeon, J. G. Legoux, V. R. Parameswaran, Wear 225-229 (1999) 825. https://doi.org/10.1016/S0043-1648(99)00034-4
  15. H. Y. Al-Fadhli, J. Stokes, M. S. J. Hashmi, B. S. Yilbas, Surf. Coat. Technol. 200 (2006) 5782. https://doi.org/10.1016/j.surfcoat.2005.08.143
  16. M. S. Han, M. S. Kim, S. K. Jang, S. J. Kim, Corros. Sci. Technol. 11 (2012) 263. https://doi.org/10.14773/cst.2012.11.6.263
  17. S. Matthew, B. James, M. Hyland, Corros. Sci. 70 (2013) 203. https://doi.org/10.1016/j.corsci.2013.01.030
  18. J. H. Hwang, U. J. Lim, J. Korean Soc. Fish. Technol. 32 (1996) 302.

피인용 문헌

  1. Electrochemical Characteristics of Arc Thermal Sprayed Inconel 625 Coating on SS400 Steel in Seawater vol.49, pp.2, 2016, https://doi.org/10.5695/JKISE.2016.49.2.172