Journal of Advanced Research in Ocean Engineering

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Strength Analysis of Mark III Cargo Containment System using Anisotropic Failure Criteria

  • Jeong, Han Koo (Department of Naval Architecture, Kunsan National University) ;
  • Yang, Young Soon (Department of Naval Architecture and Ocean Engineering, Seoul National University)
  • Received : 2015.07.08
  • Accepted : 2015.11.11
  • Published : 2015.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.

Keywords

References

  1. Agarwal, B.D., and Broutman, L.J., 1990. Analysis and performance of fibre composites. John Wiley & Sons, Inc.
  2. American Bureau of Shipping, 2006. Guidance notes on strength assessment of membrane-type LNG containment systems under sloshing loads.
  3. Blake, J.I.R., Shenoi, R.A., House, J., and Turton, T., 2001. Progressive damage analysis of tee joints with viscoelastic inserts. Composites Part A: Applied Science and Manufacturing, 32, pp.641-653. https://doi.org/10.1016/S1359-835X(00)00158-5
  4. Det Norske Veritas, 2006. Classification notes on sloshing analysis of LNG membrane tanks.
  5. Han, S.M., Rim, C.W., Cho, H.K., Suh, Y.S., Lee, J.W., and Lee, T.K., 2009. Experimental study on the structural behavior of secondary barrier of Mark-III LNG CCS. Proceedings of 28th International Conference on Ocean, Offshore and Arctic Engineering, Hawaii, USA.
  6. Hwang, S.Y., Kim, S.C., Lee, J.H., and Nho, I.S., 2014. Study on structural strength of Mark III type LNG cargo containment system by idealized triangular impulse load. Journal of Comput. Struct. Eng. Inst. Korea, 27(6), pp.615-624. https://doi.org/10.7734/COSEIK.2014.27.6.615
  7. Jeong, H.K., and Yang, Y.S., 2011. Structural strength assessment of simplified Mark III CS plate. Proceedings of COSEIK, Busan, Korea.
  8. Jeong, H.K., and Yang, Y.S., 2014a. Strength assessment of LNG CCS using strength analysis method for composite materials. Journal of the Society of Naval Architects of Korea, 51(2), pp.114-121. https://doi.org/10.3744/SNAK.2014.51.2.114
  9. Jeong, H.K., and Yang, Y.S., 2014b. Strength analysis for the plate system of the Mark III cargo containment. Journal of Comput. Struct. Eng. Inst. Korea, 27(6), pp.11-19.
  10. Kim, M.H., Lee, S.M., Lee, J.M., Noh, B.J., and Kim, W.S., 2010. Fatigue strength assessment of Mark-III type LNG cargo containment system. Ocean Engineering, 37, pp.1243-1252. https://doi.org/10.1016/j.oceaneng.2010.05.004
  11. Korean Register of Shipping, 2013. Guidance for the classification of sloshing strength assessment in membrane LNG carrier.
  12. Lee, J.W., Kim, T.W., Kim, M.H., Kim, W.S., Noh, B.J., Choe, I.H., and Lee, J.M., 2007. Numerical assessment of dynamic strength of membrane type LNG carrier insulation system. Journal of the Society of Naval Architects of Korea, 44(3), pp.305-313. https://doi.org/10.3744/SNAK.2007.44.3.305
  13. Lee, S.G., Hwang, J.O., and Kim, W.S., 2008. Wet drop impact response analysis of CCS in membrane type LNG carriers I: Development of numerical simulation analysis technique through validation. Journal of the Society of Naval Architects of Korea, 45(6), pp.726-734. https://doi.org/10.3744/SNAK.2008.45.6.726
  14. Nho, I.S., Ki, M.S., and Kim, S.C., 2011. A study on simplified sloshing impact response analysis for membrane-type LNG cargo containment system. Journal of the Society of Naval Architects of Korea, 48(5), pp.451-456. https://doi.org/10.3744/SNAK.2011.48.5.451
  15. Ochoa, O.O., and Reddy, J.N., 1990. Finite element analysis of composite laminates. Kluwer Academic Press.
  16. Padhi, G.S., Shenoi, R.A., Moy, S.S.J., and Hawkins, G.L., 1998. Progressive failure and ultimate collapse of laminated composite plates in bending. Composite Structures, 40, pp.277-291.
  17. Pareto Securities, 2012. www.paretosec.com.