DOI QR코드

DOI QR Code

Characteristics of Natural Hydraulic Lime Mortar Mixed with Basalt Fiber

바잘트 섬유를 혼합한 천연수경성석회 모르타르의 특성

  • Moon, Ki-Yeon (Korea Institute of Limestone and Advanced Materials) ;
  • Cho, Jin-Sang (Korea Institute of Limestone and Advanced Materials) ;
  • Cho, Kye-Hong (Korea Institute of Limestone and Advanced Materials) ;
  • Hong, Chang-Woo (Department of Civil Engineering, Korea National University of Transportation)
  • 문기연 (한국석회석신소재연구소 연구개발실) ;
  • 조진상 (한국석회석신소재연구소 연구개발실) ;
  • 조계홍 (한국석회석신소재연구소 연구개발실) ;
  • 홍창우 (한국교통대학교 토목공학과)
  • Received : 2015.10.30
  • Accepted : 2015.12.02
  • Published : 2015.12.30

Abstract

In this study, the strength properties of NHL based mortar with blending basalt fiber were investigated. In the first step, it was evaluated that physical properties of NHL based mortar according to mixing method of four types of basalt fiber and then mixing method of one type was selected. As a result of assessment, it showed that the physical properties with mixing method of dry blending were better than that of wet blending and mixing method that basalt fiber pre-mixed with NHL for 5 min in a blender was selected and water and aggregate were finally added. Secondly, the investigation of blending fiber length on the compressive and flexural strength for basalt fiber reinforced NHL based mortars was carried out. The compressive strength was decreased with adding fiber, and the flexural strength was increased more than plain mortar. In the case of adding 6 mm fiber, the compressive and flexural strength were improved more than that of others.

본 연구에서는 천연수경성석회(NHL) 모르타르에 바잘트 섬유를 혼합하여 섬유혼합에 따른 강도특성을 연구하고자 하였다. 건식 및 습식 4가지로하여 혼합방법에 따른 물리적 특성발현을 확인하였으며, 압축강도 및 휨강도 등을 고려하여 강도 특성이 최대로 발현되는 혼합방법 한 가지를 선택하였다. 실험결과 물성 발현은 습식혼합보다 건식혼합에서 더 우수하였으며, 건식혼합 중 바인더(NHL)와 섬유를 pre-mixing 한 후 물과 골재를 순차적으로 혼합하여 섬유의 분산력을 높여주는 혼합방법을 선택하였다. 이후 섬유 길이에 따른 물리적 특성 발현성을 확인하였다. 바잘트 섬유 길이에 따른 압축강도 및 휨강도 측정결과, Plain 샘플 대비 섬유 혼합에 따라 압축강도는 감소하는 경향성을 보였으며, 휨강도는 증가하는 경향을 나타내었다. 또한 섬유를 혼합한 샘플 중에서 섬유길이 6 mm일 때 가장 우수한 강도 특성을 나타내었다.

Keywords

References

  1. Parnas, R., Shaw, M. and Liu, Q., 2007 : Basalt fiber reinforced polymer composites, The New England Transportation Consortium
  2. Chun, S. H. and Kim, H. D., 2009 : Physical properties of basalt chopped fiber reinforced cement composite, Journal of Korea Academia-Industrial Cooperation Society, 10(6), pp. 1298-1303. https://doi.org/10.5762/KAIS.2009.10.6.1298
  3. Kunal Singha., 2012 : A Short Review on Basalt Fiber, International Journal of Textile Science, 1(4), pp. 19-28.
  4. Czigany, T., Vad, J and Ooloskei, K., 2005 : Basalt fiber as a reinforcement of polymer composites, Periodica Polytechnica Mechanical Engineering., 49, pp. 3-14.
  5. Choi, Y. W. et. al., 2014 : The Experimental study on the fluidity properties of mortar using basalt fiber and high volume fly ash, Journal of the Korean Recycled Construction Resources Institute, 2(4), pp. 345-353. https://doi.org/10.14190/JRCR.2014.2.4.345
  6. BS EN 459-1 : 2010 : Building lime, Part 1 : definitions, specifications and conformity criteria, British-Adopted European Standard, UK
  7. Harrison, A., 2005 : Carbonating and hydraulic mortars, TecEco Pty. Ltd., Hobart, Tasmania, Australia
  8. Lawrence, R. M., 2006 : A study of carbonation in nonhydraulic lime mortars, University of Bath
  9. Jeon, J. K., You, J. O. and You, S. Y., 2007 : Estimation on the dispersibility and crack resistance of fiber reinforced concrete, Conference of Korea Concrete Institute, pp. 745-748.
  10. Kim, B. I and Lee, S. H., 2014 : Comparison analysis of fiber distribution and workability for amorphous steel fiber reinforced concrete, Journal of the Korean Institute of Resources Recycling, 23(4), pp. 47-57. https://doi.org/10.7844/kirr.2014.23.4.47
  11. Choi, E. K., Lee, J. Y and Lee, C. S., 2004 : Effects of Wood sponge Pulp on Dispersion and Adherence of Fibers as well as Interfacial matrices in Fiber-reinforced Cement Composite, Journal of the Architectural Institute of Korea, 20(5), pp. 67-74.
  12. Park, S. B., Kim, J. S and Kim, Y. Y., 2008 : Rheology Control of Cement Paste for Applying ECC Produced with Slag Particles to Self-Consolidating and Shotcreting Process , Journal of the Korea Concrete Institute, 20(1), pp. 67-75. https://doi.org/10.4334/JKCI.2008.20.1.067
  13. Choi, J. I. et. al., 2015 : Engineering property of basalt fiber as a reinforcing fiber, Journal of the Korean Recycled Construction Resources Institute, 3(1), pp. 84-89. https://doi.org/10.14190/JRCR.2015.3.1.084
  14. Kim, J. S. er. al., 2010 : Tensile and fiber dispersion performance of ECC (Engineered Cementitious Composites) designed with ground granulated blast furnace slag, Journal of the Regional Association of Architectural Institute of Korea, 12(2), pp. 209-216.
  15. You, K. P. and Hyung, W. G., 2014 : Bond strength and tensile strength of polymer-modified mortar using styrene and butyl acrylate, Polymer(Korea), 38(6), pp. 820-826.