Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of the Strength Properties and Impact Resistance of the Cement Composite Materials by the use of Surface Modification of the Aramid Fibers

아라미드섬유의 표면개질에 의한 시멘트 복합재료의 강도특성 및 내충격성능의 향상효과

  • 남정수 (일본동경공업대학 응용세라믹연구소 건축물리연구센터) ;
  • 유재철 (충남대학교 건축공학과) ;
  • 김규용 (충남대학교 건축공학과) ;
  • 김홍섭 (충남대학교 건축공학과) ;
  • 전중규 (코오롱글로벌 R&BD센터)
  • Received : 2014.10.01
  • Accepted : 2014.12.09
  • Published : 2015.01.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to evaluate the effect of improvement on the impact resistance and strength properties of cement composites by surface modification of aramid fiber. For aramid fiber reinforced cement composites, therefore, dispersion capability and the bonding efficiency between the fibers and the cement composite material need to be improved. It is possible by modifying surface properties to hydrophobic, it is considered that oiling agent ratio of 1.2 % and improvement of performance is in need to be investigated. In this study, short aramid fibers were mixed by different fiber length and oiling agent ratio. And improvement of strength properties and impact resistance performance of hybrid cement composites were evaluated under the influence of steel fiber. As a result, strength properties of aramid fiber reinforced cement composites are different by mixing ratio of fiber, oiling agent ratio and length of fiber. In case of cement composites which have same volume fraction and fiber length, tensile strength and flexural strength were improved with increase of the emulsions throughput of the fiber surface. The results of evaluation on the static strength properties had effects on impact resistance performance by high-velocity impact. And it was observed that the scabbing of rear was suppressed with increase of the oiling agent ratio.

본 연구의 목적은 아라미드섬유의 표면개질에 의한 시멘트 복합재료의 강도특성 및 내충격성능의 향상효과를 평가하는 것이다. 단섬유 형태의 아라미드섬유를 섬유길이와 섬유의 표면유제처리율을 달리하여 시멘트 복합재료에 혼입하였다. 아라미드섬유보강 시멘트 복합재료의 강도특성은 섬유의 혼입율, 섬유의 표면유제처리율, 섬유의 길이에 따라 다르게 나타났으며, 특히, 동일한 섬유혼입율 및 섬유길이에 대한 인장강도 및 휨강도는 섬유의 표면유제처리율을 증가시킨 시험체가 향상되는 경향을 확인하였다. 이러한 정적 강도특성 결과는 고속비상체의 충돌에 의한 내충격성능에도 영향을 미쳤으며, 아라미드섬유의 표면유제처리율이 증가함에 따라 배면박리가 억제되는 것을 알 수 있었다. 하지만, 아라미드섬유를 섬유보강 시멘트 복합재료용 보강재로 활용하기 위해서는 섬유와 시멘트 복합재료간의 분산능력 및 부착효율을 향상시켜야 할 것으로 판단된다. 이는 아라미드섬유의 표면특성을 소수성으로 개질하는 것에 의해 가능할 것으로 사료되며, 1.2 %이상의 표면유제처리율 및 성능개선에 대해서는 추가적인 검토가 필요할 것으로 판단된다. 또한, 아라미드섬유와 후크형 강섬유를 하이브리드 한 시험체의 경우, 강도특성 및 내충격성능의 향상효과는 강섬유의 기여도가 높은 것으로 나타났다.

Keywords

References

  1. Atou, T., Sano, Y., Katayama, M., Hayashi, S. (2013), Damage evaluation of reinforced concrete columns by hypervelocity impact, Procedia Engineering, ELSEVIER, 348-354.
  2. Fariborz, V., Claudia, P. O., Paulo, J. M., George, C. (2007), Resistance of concrete protected by fabric to projectile impact, Cement and Concrete Research, ELSEVIER, 37, 96-106. https://doi.org/10.1016/j.cemconres.2006.09.003
  3. Fischer, G., and Victoe C., Li (2006), International RILEM Workshop on High Performance Fiber Reinforced Cementitoius Composites (HPFRCC) in Structural Applications, E&Fn Spon.
  4. Fukuyama, H., Matsuzaki, Y., Sato, Y., Iso, M., Suwada, H. (2000), Structural Performance of Engineered Cementitious Composite Elements and Hybrid Structures, Proceedings of 6th ASCCS Conference, ASCCS-6 Secretarist, 969-976.
  5. Kesner, K. E., Billington, S., and Douglas, K. (2003), Cyclic Response of Highly Ductile Fiber-Reinforced Cement-Based Composites, ACI Materials Journal, 90(2), 182-190.
  6. Kim, G. Y., Nam, J. S., Miyauchi, H. (2011), Evaluation on impact resistance performance of fiber reinforced mortar under high-velocity impact of projectile, Journal of the Architectural Institute of Korea, Structure & Construction Section, AIK, 27(9), 101-108.
  7. Kim, Y. W., Min, K. H., Yang, J. M., Yoon, Y. S. (2009), Flexural and Impact Resisting Performance of HPFRCCs Using Hybrid PVA Fibers, Journal of the Korea Concrete Institute, KCI, 21(6), 705-712. https://doi.org/10.4334/JKCI.2009.21.6.705
  8. Lee, J. Y., Kim, M. H., Min, K. H., Yoon, Y. S. (2011), Analysis of bhaviors of conrete strengthened with FRP sheets and steel fibers under low-velocity impact loading, Journal of the Korea Institute for Structural Maintenance and Inspection, 15(4), 155-164. https://doi.org/10.11112/jksmi.2011.15.4.155
  9. Lee, J. Y., Shin, H. O., Min, K. H., Yoon, Y. S. (2013), Analytical evaluation of high velocity impact resistance of two-way RC slab reinforced with steel fiber and FRP Sheet, Journal of the Korea Institute for Structural Maintenance and Inspection, 17(3), 1-9. https://doi.org/10.11112/jksmi.2013.17.3.001
  10. Li. V. C. (1993), The design of cementitious composites for civil engineering applications, Japan Society of Civil Engineers, 10(2), 37-48.
  11. Maalej, M., Zhang, J., Quek, S. T., & Lee, S. C. (2004), High-velocity impact resistance of hybrid-fiber engineered cementitious composites, In Proc. 5th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-5, 1051-1058.
  12. Ohkubo, K., Beppu, M., Ohno, T., Satoh, K. (2008), Experimental study on the effectiveness of fiber sheet reinforcement on the explosive-resistant performance of concrete plates, International Journal of Impact Engineering, ELSEVIER, 35, 1702-1708. https://doi.org/10.1016/j.ijimpeng.2008.07.022

Cited by

  1. 고로슬래그 미분말을 이용한 알칼리자극제 기반의 보강그라우트재 개발 vol.31, pp.1, 2015, https://doi.org/10.9720/kseg.2021.1.067