Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Development of User Protocol Converter about Modbus and NMEA0183

Modbus와 NMEA0183에 대한 사용자 프로토콜 컨버터 개발

  • Eum, Sang-hee (Department of Shipbuilding and Marine, Dongju College) ;
  • Hong, Sung-ki (The school of Oceanic Culture Contents Convergence, Korea Maritime University)
  • Received : 2015.10.02
  • Accepted : 2015.11.09
  • Published : 2015.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we want to able to reduce the time effectively about the analysis of protocol and development of protocol converter in industrial network. For this purpose, we developed the user protocol converter that can be to analysing the communication protocol in the industrial network. and also that is able to converting to user protocol and transmitting to another network. The developed user protocol converter was consist of S/W and H/W, and is supporting the Modbus, the NMEA0183 and the ethernet. The hardware main processor was used the AVR128, and placed the serial communication part and the ethernet part in converter board. The experiment results, we acquired very high transmission rate and conversion rate.

본 논문은 산업 네트워크의 프로토콜의 해석과 변환기 개발을 위해 소요 되었던 시간을 효과적으로 단축하고자 하였다. 이를 위하여 산업용 네트워크의 통신 프로토콜을 해석하여 데이터를 획득하고 해석하여 사용자 프로토콜로 재구성하여 재전송 할 수 있는 프로토콜 컨버터를 개발 하였다. 개발된 사용자 프로토콜 컨버터는 소프트웨어와 하드웨어로 구성되며 Modbus, NMEA0183과 이더넷을 지원한다. 하드웨어 메인 프로세서는 AVR128을 사용하였고, 직렬 통신부, Ethernet 통신부를 배치하였다. 데이터 전송 실험 결과 매우 우수한 전송률과 변환율을 얻을 수 있었다.

Keywords

References

  1. B. Galloway and G. P. Hancke, "Introduction to Industrial Control Networks", IEEE Communications Surveys and Tutorials, vol. 15, issue 2, pp.860-880, May, 2013. https://doi.org/10.1109/SURV.2012.071812.00124
  2. An Introduction to Industrial Ethernet [Internet]. Available: http://www.bb-elec.com/Learning-Center
  3. H. Zhang, G. Xu, Y. Lu, and G. Lou, "Research on the Field Bus Protocol Conversion Gateway", Journal of Convergence Information Technology(JCIT), vol. 7, no. 15. pp.160-168. 2012. https://doi.org/10.4156/jcit.vol7.issue15.19
  4. F. Zhang, Y. Zhu, C. Yan, J. Bi, H. Xiong, and S. Yuan "A Realization Method of Protocol Conversion Between Modbus and IEC61850", Open Journal of Applied Sciences, vol. 3, pp.18-23. 2013. https://doi.org/10.4236/ojapps.2013.32B004
  5. S. Kanse, B. Mayuri, B. Abhilasha, and K. Nilam, "Protocol Converter(UART, I2C, manchester protocols to USB)", International Journal of Research in Engineering and Technology, vol. 4, issue 1, pp. 88-90, 2015.
  6. Modbus Application Protocol Specification V1.1a, Modbus IDA, June 4. 2004.
  7. NMEA0183 - Standard for Interfacing Marine Electronic Devices, version 3.01, NMEA, Jan. 1, 2002.

Cited by

  1. The Development of Industrial Communication Monitoring Board using AVR vol.20, pp.6, 2016, https://doi.org/10.6109/jkiice.2016.20.6.1177
  2. Development of a voyage performance monitoring system based on ENC for small and medium-sized vessels vol.20, pp.8, 2016, https://doi.org/10.6109/jkiice.2016.20.8.1615
  3. 유량 데이터 오차율 분석을 통한 최적의 유량데이터 취득방안 제안 vol.31, pp.3, 2015, https://doi.org/10.11001/jksww.2017.31.3.249
  4. 산업용 장비 모니터링을 위한 프로그램 가능한 프로토콜 데이터 변환 알고리즘 vol.21, pp.11, 2017, https://doi.org/10.6109/jkiice.2017.21.11.2139
  5. 적층형 통신 모듈을 이용한 산업용 통신 게이트웨이 설계 vol.23, pp.12, 2015, https://doi.org/10.6109/jkiice.2019.23.12.1673