DOI QR코드

DOI QR Code

아날로그 회로를 이용한 3상 PWM 출력 전압 측정

Sensing of Three Phase PWM Voltages Using Analog Circuits

  • Jou, Sung-Tak (Dept. of Electrical and Computer Engineering, Ajou University) ;
  • Lee, Kyo-Beum (Dept. of Electrical and Computer Engineering, Ajou University)
  • 투고 : 2015.08.25
  • 심사 : 2015.10.21
  • 발행 : 2015.11.01

초록

This paper intends to suggest a sensing circuit of PWM voltage for a motor emulator operated in the inverter. In the emulation of the motor using a power converter, it is necessary to measure instantaneous voltage at the PWM voltage loaded from the inverter. Using a filter can generate instantaneous voltage, while it is difficult to follow the rapidly changing inverter voltage caused by the propagation delay and signal attenuation. The method of measuring the duty of PWM using FPGA can generate output voltage from the one-cycle delay of PWM, while the cost of hardware is increasing in order to acquire high precision. This paper suggests a PWM voltage sensing circuit using the analogue system that shows high precision, one-cycle delay of PWM and low-cost hardware. The PWM voltage sensing circuit works in the process of integrating input voltage for valid time by comparing levels of three-phase PWM input voltage, and produce the output value integrated at zero vector. As a result of PSIM simulation and the experiment with the produced hardware, it was verified that the suggested circuit in this paper is valid.

키워드

참고문헌

  1. O. Vodyakho, M. Steurer, C. S. Edrington, and F. Fleming, "An induction machine emulator for high-power applications utilizing advanced simulation tools with graphical user interfaces," IEEE Transactions on Energy Conversion, Vol. 27, No. 1, pp. 160-172, Mar. 2012. https://doi.org/10.1109/TEC.2011.2179302
  2. M. Kesler, E. Ozdemir, M. C. Esacikoglu, and L. M. Tolbert, "Power converter-based three-phase nonlinear load emulator for a hardware testbed system," IEEE Transactions on Power Electronics, Vol. 29, No. 11, pp. 5806-5812, Nov. 2014. https://doi.org/10.1109/TPEL.2014.2301815
  3. R. Wei, M. Steurer, and T. L. Baldwin, "Improve the stability and the accuracy of power hardware-in-theloop simulation by selecting appropriate interface algorithms," IEEE Transactions on Industry Applications, Vol. 44, No. 4, pp. 1286-1294, Jul. 2008. https://doi.org/10.1109/TIA.2008.926240
  4. E. M. Adzic, M. S. Adzic, V. A. Katic, D. P. Marcetic, and N. L. Celanovic, "Development of high-reliability EV and HEV IM propulsion drive with ultra-low latency HIL environment," IEEE Transactions on Industrial Informatics, Vol. 9, No. 2, pp. 630-639, May. 2013. https://doi.org/10.1109/TII.2012.2222649
  5. Y. S. Rao, and M. C. Chandorkar, "Real-time electrical load emulator using optimal feedback control technique," IEEE Transactions on Industrial Electronics, Vol. 57, No. 4, pp. 1217-1225, Apr. 2010. https://doi.org/10.1109/TIE.2009.2037657
  6. R. Bojoi, E. mando, S. G. Rosu, S. Vaschetto, and P. Soccio, "Virtual load with common mode active filtering for power hardware-in-the-loop testing of power electronic converters," Industrial Electronics Society, IECON 2014-40th Annual Conference of the IEEE, pp. 1875-1881, Oct. 2014.
  7. S. Lentijo, S. D'Arco, and A. Monti, "Comparing the dynamic performances of power hardware-in-the-loop interfaces," IEEE Transactions on Industrial Electronics, Vol. 57, No. 4, pp. 1195-1207, Apr. 2010. https://doi.org/10.1109/TIE.2009.2027246
  8. F. Lehfuss, G. Lauss, P. Kotsampopoulos, N. Hatziargyriou, P. Crolla, and A. Roscoe, "Comparison of multiple power amplification types for power hardwarein-the-loop applications," In proceedings of Complexity in Engineering (COMPENG), pp. 1-6, Jun. 2012.
  9. J. H. Park, H. G. Jeong, and K. B. Lee, "An improved DPWM method for reduction of resonant problem in the inverter," In proceedings of Energy Conversion Congress and Exposition (ECCE), pp. 1528-1533, Sep. 2014.
  10. S. J. Lee, J. S. Lee, and K. B. Lee, "A new switching method for reducing switch loss of single-phase three-level NPC inverter," The transactions of the Korean Institute of Electrical Engineers, Vol. 64, No. 2, pp. 268-275, Feb. 2015. https://doi.org/10.5370/KIEE.2015.64.2.268