DOI QR코드

DOI QR Code

플라즈마를 이용한 LPG연료 개질 특성연구

Characteristics of LPG Fuel Reforming using Plasma Technology

  • 투고 : 2014.09.25
  • 심사 : 2015.02.28
  • 발행 : 2015.02.28

초록

In this study, characteristics of reforming process of automotive liquefied petroleum gas (LPG) fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2/C$ ratios, reactant flow rate and metal form on the process were investigated. In the test of varying $O_2/C$ ratio from partial oxidation to stoichiometry combustion, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2/C$ ratio for the highest $H_2$ yield was determined to be around 1.0 for 20~50 lpm, and 1.35 for 100 lpm. Specific energy density (SED) was major factor in reforming process and higher SED leads to higher $H_2$ yield. And metal form in the reformer increased $H_2$ yield of about 34 % as compared to the case of no metal form. The result can be a guide to map optimal condition of reforming process.

키워드

참고문헌

  1. Junhong Park, Jongtae Lee, Sunmoon Kim, Jeongsoo Kim, Daeil Kang, Yunsung Lim and Boyoung Han, "Estimation on the Emission Reduction of SULEV LPG Vehicles," J. KOSAE Vol. 28, NO.1, pp.66-76, 2012.
  2. Kernyong Kang, Daeyup Lee, Seungmook Oh and Changup Kim, "Performance of an Liquid Phase LPG Injection Engine for Heavy Duty Vehicles," SAE 2001-02-1958, 2001.
  3. Changup Kim, Daeyup Lee, Seungmook Oh, Kernyong Kang, Hoimyung Choi and Kyoungdoug Min, "Enhancing Performance and Combustion of an LPG MPI Engine for Heavy Duty Vehicles," SAE 2002 International Congress and Exposition, 2002-01-0449, 2002.
  4. Yunwhan Park, Deahoon Lee, Changup Kim, Kernyong Kang, "Characteristics of LPG fuel Reforming in Plasma Reformer for Hydrogen Production, " KIGAS Vol.17, No.6, 2013
  5. Tunestal, P., Christensen, M., Einewall, P., Andersson, T. et al., "Hydrogen Addition For Improved Lean Burn Capability of Slow and Fast Burning Natural Gas Combustion Chambers," SAE Technical Paper 2002-01-2686, 2002.
  6. Miyamoto, T., Hasegawa, H., Yagenji, T., Seo, T. et al., "Effects of Hydrogen Addition to Intake Mixture on Cyclic Variation of Diesel Engine," SAE Technical Paper 2011-01-1964, 2011.
  7. Kirwan, J., Quader, A., and Grieve, M., "Fast Start-Up On-Board Gasoline Reformer for Near Zero Emissions in Spark-Ignition Engines," SAE Technical Paper 2002-01-1011, 2002.
  8. Tomohiro Nozaki, Akinori Hattori, Ken Okazaki, 2004, "Partial oxidation of methane using a microscale non-equilibrium plasma reactor," Catalysis today 98, pp. 604-616.
  9. L. Bromberg, D. R. Cohn, A. Rabinovich, J. E. Surma, and J. Virden, "Compact plasmatronboosted hydrogen generation technology for vehicular applications," Int.J. Hydrogen Energy, Vol. 24, pp. 341-350, 1999. https://doi.org/10.1016/S0360-3199(98)00013-5
  10. Dae Hoon Lee, Kwan-TAE Kim, Min Suk Cha, Young-Hoon Song, "Effect of excess oxygen in plasma reforming of diesel fuel," Int.J. Hydrogen Energy, Vol. 35, pp. 4668-4675, 2010. https://doi.org/10.1016/j.ijhydene.2010.02.091

피인용 문헌

  1. A Review of Biofuels Production Technologies from Microalgae vol.27, pp.4, 2016, https://doi.org/10.7316/KHNES.2016.27.4.386
  2. Study on Effect of Phase Separation of Bioethanol Blends Fuel by Water Contents vol.27, pp.6, 2016, https://doi.org/10.7316/KHNES.2016.27.6.712
  3. N-pentane activation and products formation in a temperature-controlled dielectric barrier discharge reactor vol.27, pp.11, 2018, https://doi.org/10.1088/1361-6595/aae701