한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제24권1호
  • /
  • Pages.23-30
  • /
  • 2015
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

Improvement of Optical 3D Scanner Performance Using Atomization-Based Spray Coating

  • Valinasab, Behzad (Department of Mechanical Engineering, University of Victoria) ;
  • Rukosuyev, Maxym (Department of Mechanical Engineering, University of Victoria) ;
  • Lee, Jason (Department of Mechanical Engineering, University of Victoria) ;
  • Ko, Junghyuk (Department of Mechanical Engineering, University of Victoria) ;
  • Jun, Martin B.G. (Department of Mechanical Engineering, University of Victoria)
  • 투고 : 2015.02.01
  • 심사 : 2015.02.13
  • 발행 : 2015.02.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The scanning quality can be influenced by reflective abilities of a surface. Transparency and glossiness of a surface can highly limit the scanning results. Various techniques have been developed to solve problems of reflective and transparent surfaces. As one of the most feasible and convenient solutions, a thin layer of coating with proper specifications is sprayed on surface for eliminating the problems of the surfaces. As the main goal is to keep the object geometry unchanged, then it is important to coat the surface with layers less than one micrometer in thickness. For this purpose, a newly designed atomization-based spray system has been developed and tested in sets of experiments to study its efficiency on scanning results while objects with the surface are in use. This paper presents the spray design process and then studies and compares the 3D scanning results of the surfaces coated with atomization-based and aerosol sprays.

키워드

참고문헌

  1. Remondino, F., El-Hakim, S., 2006, Image-based 3D Modelling: A Review, Photogrammetric Record, 21:115 269-291. https://doi.org/10.1111/j.1477-9730.2006.00383.x
  2. Bernardini, F., Rushmeier, H., 2002, The 3D Model Acquisition Pipeline, Computer Graphics Forum, 21:2 149-172.
  3. Rocchini, C., Cignoni, P., Montani, C., Pingi, P., Scopigno, R., 2001, A Low Cost 3D Scanner Based on Structured Light, Computer Graphics Forum 20:3 299-308.
  4. Maierhofer, C., Krankenhagen, R., Rollig, M., Schlichting, J., Schiller, M., Seidl, T., Mecke, R., Kalisch, U., Hennen, C., Meinhardt, J., 2011, Investigating Historic Masonry Structures with a Combination of Active Thermography and 3D Laser Scanner, Qirt Journal, 8:1 115-118. https://doi.org/10.3166/qirt.8.115-118
  5. Martelli, S., Fadda, M., Dario, P., Marcacci, M., Marcenaro, G. P., Visani, A., 1991, A Laser Scanner System for Investigating Noninvasive Matching Strategies in Computer-assisted Orthopedicsurgery, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 13 1757-1758.
  6. Dura, E., Bell, J., Lane, D., 2008, Reconstruction of Textured Seafloors from Side-scan Sonar Images, IEEE Proceedings-radar Sonar and Navigation, 151:2 114-126.
  7. Jun, M. B. G., Joshi, S. S., DeVor, R. E., Kapoor, S. G., 2008, An Experimental Evaluation of an Atomization-based Cutting Fluid Application System for Micromachining, Journal of Manufacturing Science and Engineering-transactions of the ASME, 130:3 1-8.
  8. Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., Chiffre, L. D., Weckenmann, A., 2011, Computed Tomography for Dimensional Metrology, Cirp Annals-manufacturing Technology, 60:2 821-842. https://doi.org/10.1016/j.cirp.2011.05.006
  9. Pirodda, L., 1982, Shadow and Projection Moire Techniques for Absolute or Relative Mapping of Surface Shapes, Optical Engineering, 21:4 640-649.

피인용 문헌

  1. 3D 스캔 시 품질향상을 위한 스프레이 도포 자동화 장비 개발 vol.17, pp.4, 2016, https://doi.org/10.5762/kais.2016.17.4.100
  2. Performance Evaluation of Atomization-Based Uniform Spray Coating for 3D Scanning vol.34, pp.10, 2015, https://doi.org/10.7736/kspe.2017.34.10.689