Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Application of 2 Dimensional Numerical Model for Analysis of Riprap Weir Effect

Riprap Weir 효과 분석을 위한 2차원 수치해석 모형의 적용

  • Kim, Sang-Ho (Department of Civil Engineering, Sangji University)
  • 김상호 (상지대학교 이공과대학 건설시스템공학과)
  • Received : 2015.01.12
  • Accepted : 2015.02.12
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

At the bends of a river, the deflected flow of high energy erodes the embankment and transports sediment, ultimately changing the river's course. Such phenomena lead to instability of the embankment and may cause serious problems for nearby roads, land, or riverside structures. This study intends to analyze the characteristics of hydraulic flow at S-shaped bends after the installation of Riprap Weirs designed to prevent changes in a river's course and embankment erosion. An experimental channel was constructed by a two-dimensional CCHE2D model, and analyzed the characteristics of hydraulic flow with and without the Riprap Weirs. Also, the characteristics of hydraulic flow at the inner and outer sides of river bends and at points near reservoirs were analyzed, depending on the intervals between the Riprap Weirs.

하천 만곡부에서는 높은 에너지의 편향적 흐름으로 인하여 제방침식 및 유사이송으로 하도변동을 야기하고 있는데 이러한 현상들은 제방의 불안정을 초래하고 인접 도로와 토지, 하천변 구조물에 심각한 문제를 야기할 수 있다. 본 연구에서는 제방 침식과 하도변동을 방지할 수 있는 Riprap Weir를 S자 만곡수로에 설치하고, 만곡부에서의 수리학적 흐름특성을 분석하고자 한다. 이를 위해 이차원 CCHE2D 모형을 이용하여 실험하도를 구축하고 Riprap Weir의 유무에 따른 수리특성분석을 실시하였다. 이를 통해 Riprap Weir의 설치간격에 따른 만곡부 내측과 외측에서의 수리특성과 보 인근의 흐름특성을 분석하였다.

Keywords

References

  1. J. G. Kang, H. K. Yeo, S. J. Kim, "An Experimental Study on Tip Velocity and Downstream Recirculation Zone of Single Groyne Conditions", J. of Korea Water Resources Association, pp. 143-153, 2005. DOI: http://dx.doi.org/10.3741/JKWRA.2005.38.2.143
  2. J. G. Kang, H. K. Yeo, Y. S. Roh, "An Experimental Study on a Characteristics of Flow around Groynes for Groyne Spacing", J. of Korea Society of Civil Engineering, pp. 271-278, 2006.
  3. H. G. Park, S. F. An, H. K. Jee, S. T. Lee, "Characteristics of Two-Dimensional Flow for Optimal Interval of Groynes by Using Hydrodynamic Model", Proceeding of Korea Society of Civil Engineering, pp. 1689-1693, 2008.
  4. E. V. Richardson and D. B. Simons, Spurs and Guide Banks. Open File Report, Colorado State University Engineering, Research Center, Fort Collins, Colorado, February, 1974.
  5. R. R. Copeland, Bank Protection Techniques Using Spur Dikes. Miscellaneous paper HL83-1, U. S. Army Engineer, Waterways Experiment Station, 1983.
  6. FHWA, Design of Spur-type Streambank Stabilization Structures. U.S. DOT, FHWA, Rep. No. FHWA/RD 84/101, McLean, VA., 1985.
  7. M. L. Heintz, "Inversitgation of Bendway Weir Spacing", Ph.D. Thesis, Colorado State University, 2002.
  8. Korea Water Resource Association, "14th hydraulic workshop hand book." Korea Water Resources Association (in Korean), 2005.