DOI QR코드

DOI QR Code

Vibration Control of a Single-wheel Robot Using a Filter Design

필터 설계를 통한 한 바퀴 구동 로봇의 진동 제어

  • Lee, Sang-Deok (Department of Mechatronics Engineering, Chungnam National University) ;
  • Jung, Seul (Department of Mechatronics Engineering, Chungnam National University)
  • 이상덕 (충남대학교 메카트로닉스공학과) ;
  • 정슬 (충남대학교 메카트로닉스공학과)
  • Received : 2015.06.08
  • Accepted : 2015.07.27
  • Published : 2015.09.01

Abstract

In this paper, the vibration of a single-wheel mobile robot is minimized by designing a filter. An AHRS (Attitude and heading reference system) sensor is used for measuring the state of the robot. The measured signals are analyzed using the FFT method to investigate the fundamental vibrational frequency with respect to the flywheel's speed of the gimbal system. The IIR notch filter is then designed to suppress the vibration at the identified frequency. After simulating the performance of the designated filter using the measured sensor data through extensive experiments, the filter is actually implemented in a single-wheel mobile robot, GYROBO. Finally, the performance of the designed filter is confirmed by performing the balancing control task of the GYROBO system.

Keywords

References

  1. S. M. Yang and S. C. Wang, "The detection of resonance frequency in motion control systems," Industry Applications, IEEE Transactions on, vol. 50, no. 5, pp. 3423-3427, Sep.-Oct. 2014. https://doi.org/10.1109/TIA.2014.2306982
  2. D.-H. Lee, J. H. Lee, and J.-W. Ahn, "Mechanical vibration reduction control of two-mass permanent magnet synchronous motor using adaptive notch filter with fast Fourier transform analysis," IET Elect. Power Appl., vol. 6, no. 7, pp. 455-461, 2012. https://doi.org/10.1049/iet-epa.2011.0322
  3. S. Zhou and J. Shi, "Active balancing and vibration control of rotating machinery: A survey," The Shock and Vibration Digest, vol. 33, no. 4, pp. 361-371, 2001. https://doi.org/10.1177/058310240103300501
  4. P. Schmidt and T. Rehm, "Notch filter tuning for resonant reduction in dual inertia systems," 1999 IEEE Industry Applications Conference, Phoenix, USA, pp. 1730-1734.
  5. M. Valenzuela, J. Bentley, and R. Lorenz, "Evaluation of torsional oscillations in paper machine sections," Industry Applications, IEEE Transactions on, vol. 41, no. 2, pp. 493-501, Mar.-Apr. 2005. https://doi.org/10.1109/TIA.2005.844383
  6. C. A. Michael and A. N. Safacas, "Dynamic and vibration analysis of a multimotor DC drive system with elastic shafts driving a tissue paper machine," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2033-2046, 2007. https://doi.org/10.1109/TIE.2007.895149
  7. W. Singhose and J. Vaughan, "Reducing vibration by digital filtering and input shaping," IEEE Trans. Control Syst. Technol., vol. 19, no. 6, pp. 1410-1420, 2011. https://doi.org/10.1109/TCST.2010.2093135
  8. S. N. Vukosavic and M. R. Stojic, "Suppression of torsional oscillations in a high-performance speed servo drive," IEEE Trans. Ind. Electron., vol. 45, no. 1, pp. 108-117, 1998. https://doi.org/10.1109/41.661311
  9. K. Hirano, S. Nishimura, and S. K. Mitra, "Design of digital notch filters," IEEE Trans. Commun., vol. 22, no. 7, pp. 964-970, 1974. https://doi.org/10.1109/TCOM.1974.1092311
  10. J. A. Cadzow, "Digital notch filter design procedure," IEEE Trans. Acoust., Speech, Signal Processing, vol. ASSP-22, pp. 10-15, 1974.
  11. J. H. Lee and H. J. Shin, "Balancing control of a unicycle robot using ducted fans," Journal of Institute of Control, Robotics and Systems, vol. 20, no. 9, pp. 895-899, 2015. https://doi.org/10.5302/J.ICROS.2014.14.0055
  12. P. K. Kim and S. Jung, "Experimental studies of neural network control for one-wheel mobile robot," Journal of Control Science and Engineering, doic:10.1155/2012/194397, 2012.
  13. J. H. Park and S. Jung, "Development and control of a single-wheel robot: Practical Mechatronics approach," Mechatronics, vol. 23, no. 6, pp. 594-606, 2013. https://doi.org/10.1016/j.mechatronics.2013.05.010
  14. P. K. Kim, J. H. Park, M. S. Ha, and S. Jung, "Implementation and balancing control of one-wheel robot, GYROBO," Journal of Institute of Control, Robotics and Systems, vol. 19, no. 6, pp. 501-507, 2013. https://doi.org/10.5302/J.ICROS.2013.13.1880
  15. S. D. Lee and S. Jung, "Vibration detection and suppression of a single-wheel system using an AHRS sensor," Proc. of ICROS Annual Conference 2015 (in Korean), Daejeon, Korea, pp. 251-252, May 2015.

Cited by

  1. Analysis of Relationship between Body and Gimbal Motion Through Experiment of a Single-wheel Robot Based on an Inverse Gyroscopic Effect vol.21, pp.11, 2015, https://doi.org/10.5302/J.ICROS.2015.15.0102