Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Spray Behavior of DME-LPG Blended Fuels in a Common-rail Injection System

커먼레일 분사 시스템에서 DME-LPG 혼합연료의 분무거동에 관한 연구

  • Received : 2015.03.03
  • Accepted : 2015.03.18
  • Published : 2015.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to investigate the spray behavior of DME-LPG blended fuels in common rail injection system for diesel engines. The visualization experiment was performed to analyze the macroscopic spray behavior of test fuels. In addition, the experiment using BOS(Background Oriented Schlieren) method is performed to compare liquid phase and gas phase. The test fuels are injected in high pressure chamber. The ambient pressure of high pressure chamber was formed by nitrogen gas. Spray tip penetration, spray cone angle and spray area were measured using high speed camera. SMD(Sauter Mean Diameter) and spray particle velocity were measured using the PDPA(Phase Doppler Particle Analyzer) system to analyze the microscopic properties of test fuels. The results of this experiment showed that spray tip penetration, spray cone angle and spray area of DME-LPG fuels are similar to those of DME fuel. When compared to results of experiment using BOS, significant differences of spray tip penetrations, spray cone angle and spray area are showed because of gas phase. The results of experiment using BOS method showed higher values. SMD of DME-LPG blended fuels is smaller than that of DME fuel. Velocity of DME-LPG blended fuels is faster than that of DME fuel.

Keywords

References

  1. 채선영, 권석재, "이산화탄소 포집 및 저장 실용화를 위한 국내 정책 연구", 해양환경안전학회지, 제18권, 6호, 2012, pp. 617-625. https://doi.org/10.7837/kosomes.2012.18.6.617
  2. 서구원, "국내 주요 농산물의 푸드마일리지와 이산화탄소 배출량 분석", 한국대기환경학회지, 제28권, 6호, 2012, pp. 706-713. https://doi.org/10.5572/KOSAE.2012.28.6.706
  3. 이희수, 박종천, 조용진, 정세민, 유정석, "석박의 운항에 의해 배출되는 이산화탄소에 대한 포괄적 환경영향평가," 한국해양환경.에너지학회지, 제16권, 3호, 2013, pp. 181-188.
  4. Ramadhas, A. S., Muraleedharan, C. and Jayaraj, S., "Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil", Renew Energy, Vol. 30, 2005, pp. 1789-1800. https://doi.org/10.1016/j.renene.2005.01.009
  5. 정규수, 이동곤, 연인모, 노현구, 박성욱, 이창식, "4실린더 커먼레일 디젤엔진에서 바이오디젤 혼합연료와 EGR율에 따른 연소 및 배기특성," 한국자동차공학회논문집, 제19권, 4호, 2011, pp. 130-136.
  6. G. Zamboni and M. Capobianco, "Influence of high and low pressure EGR and VGT control on in-cylinder pressure diagrams and rate of heat release in an automotive turbocharged diesel engine", Applied Thermal Engineering, Vol. 51, 2013, pp. 586-596. https://doi.org/10.1016/j.applthermaleng.2012.09.040
  7. A. A. Pesaran, "Battery thermal models for hybrid vehicle simulations", Journal of Power Sources, Vol. 110, 2002, pp. 377-382. https://doi.org/10.1016/S0378-7753(02)00200-8
  8. 이동섭, "연료전지 하이브리드 차량의 연비향상을 위한 배터리 동력분배 최적화", 대한기계학회논문집 A권, 제37권, 3호, 2013, pp. 397-403.
  9. 김형진, 성병준, "CNG 하이브리드 시내버스 개발," 오토저널, 제35권, 2호, 2013, pp. 18-23.
  10. S. H. Park, J. P. Cha, H. J. Kim and C. S. Lee, "Effect of early injection strategy on spray atomization and emission reduction characteristics in bioethanol bleded fueled engine", Energy, Vol. 39, 2012, pp. 375-387. https://doi.org/10.1016/j.energy.2011.12.050
  11. 안상연, 김웅일, 이창식, "폐식용유 바이오디젤 연료의 분무특성에 관한 연구," 한국액체미립화학회지, 제18권, 4호, 2013, pp. 182-187. https://doi.org/10.15435/JILASSKR.2013.18.4.182
  12. 박정환, 박수한, 이창식, 박성욱, "분사 조건이 다공형 GDI 인젝터의 분무 거동에 미치는 영향", 한국자동차공학회논문집, 제20권, 2호, 2012, pp. 116-122. https://doi.org/10.7467/KSAE.2012.20.2.116
  13. S. H. Lee, S. M. Oh, Y. Choi and K. Y. Kang, "Performance and emission characteristics of a CI engine operated with n-Butane blended DME fuel", Applied Thermal Engineering, Vol. 31, 2011, pp. 1929-1935. https://doi.org/10.1016/j.applthermaleng.2011.02.039
  14. S. H. Bang AND C. S. Lee, "Comparison between background oriented Schlieren (BOS) technique and scattering method for the spray characteristics of evaporating oxygenated fuels", Optik, Vol. 124, 2013, pp. 2147-2150. https://doi.org/10.1016/j.ijleo.2012.06.071
  15. W. I. Kim, K. H. Lee and C. S. Lee, "Spray and atomization characteristics of isobutene blended DME fuels", Journal of Natural Gas Science and Engineering, Vol. 22, 2015, pp. 98-106. https://doi.org/10.1016/j.jngse.2014.11.015