DOI QR코드

DOI QR Code

Analysis of Thermal Effect by Coolant Plate Number in High-Temperature Polymer Electrolyte Membrane Fuel Cell Stack

고온형 고분자 전해질 연료전지 스택 내부의 냉각판 수가 스택에 미치는 열 영향성의 수치적 연구

  • Received : 2015.01.02
  • Accepted : 2015.04.30
  • Published : 2015.04.30

Abstract

High-Temperautre Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC) with phosphoric acid-doped polybenzimidazole (PBI) membrane has high power density because of high operating temperature from 100 to $200^{\circ}C$. In fuel cell stack, heat is generated by electrochemical reaction and high operating temperature makes a lot of heat. This heat is caouse of durability and performance decrease about stack. For these reasons, heat management is important in HT-PEMFC. So, we developed HT-PEMFC model and study heat flow in HT-PEMFC stack. In this study, we placed coolant plate number per cell number ratio as variable and analysed heat flow distribution in stack.

Keywords

References

  1. C. Purushothama, and H. C. Ju, "Three-dimensional non-isothermal modeling of a phosphoric acid-doped polybenzimidazole (PBI) membrane fuel cell", Solid State Ionics, Vol. 225, 2012, p. 15-39.
  2. T. W. Song, J. S. Yi, J. R. Kim, J. S. Ko and K. H. Choi, "Method of Improving the Temperature Distribution of High- Temperature PEMFC stack", The Korean Society of Mechanical Engineers, 2012, pp. 32-33.
  3. S. H. Lee, W. H. Pyen, D. H. Rhee and H. H. Cho, "An Investigation on Temperature Variation of Cathode Bipolar Plate for Proton Exchange Membrane Fuel Cell", The Korean Society of Mechanical Engineers, 2006, pp. 25-30.
  4. B. S. Kim, Y. T. Lee, Y. H. Jang, Y. C. Kim and J. M. Choi, "An experimental study on the performance of cooling channels for the fuel cell stack", The Korean Society of Mechanical Engineers, 2007, pp. 165-170.
  5. Y. H. Kim, K. J. Lee, Y. C. Kim and J. M. Choi, "Numerical Analysis on the Performance of Cooling-Plate for Fuel Cell Stack with a Variation of Unit Cell Layer", The Korean Society of Mechanical Engineers, 2006, pp. 19-24.
  6. L. Qingfeng, H.A. Hjuler, N.J. Bjerrum, "Phosphoric acid doped polybenzimidazole membranes: Physiochemical characterization and fuel cell applications", Journal of Applied Electrochemistry, 2001, pp. 773-779.
  7. S, M. Lee, Y. H. Lee, K. K. Ahn and S. S. Yu, "Performance Analysis of Off-Gas/Syngas Combustor for Thermal Management of High Temperature Fuel Cell System", Trans. of the Korean Hydrogen and New Energy Society, 2010, pp. 193-200.