DOI QR코드

DOI QR Code

Adopting flexibility of the end-plate connections in steel moment frames

  • Ghassemieh, M. (School of Civil Engineering, University of Tehran) ;
  • Baei, M. (Urban Modelling Group, School of Civil, Structural and Environmental Engineering, University College Dublin) ;
  • Kari, A. (Engineering Department, Qom University of Technology) ;
  • Goudarzi, A. (School of Civil Engineering, University of Tehran) ;
  • Laefer, D.F. (Urban Modelling Group, School of Civil, Structural and Environmental Engineering, University College Dublin)
  • 투고 : 2014.04.14
  • 심사 : 2014.11.15
  • 발행 : 2015.05.25

초록

The majority of connections in moment resisting frames are considered as being fully-rigid. Consequently, the real behavior of the connection, which has some level of flexibility, is ignored. This may result in inaccurate predictions of structural response. This study investigates the influence of flexibility of the extended end-plate connections in the steel moment frames. This is done at two levels. First, the actual micro-behavior of extended end-plate moment connections is explored with respect to joint flexibility. Then, the macro-behavior of frames with end-plate moment connections is investigated using modal, nonlinear static pushover and incremental dynamic analyses. In all models, the P-Delta effects along with material and geometrical nonlinearities were included in the analyses. Results revealed considerable differences between the behavior of the structural frame with connections modeled as fully-rigid versus those when flexibility was incorporated, specifically difference occurred in the natural periods, strength, and maximum inter-story drift angle.

키워드

참고문헌

  1. Abaqus User's Manual (2003), Version 6.4, Abaqus Inc., Providence, R.I.
  2. AISC (1989), Specification for Structural Steel Buildings, Chicago, IL, USA.
  3. AISC (2010), Specification for Structural Steel Buildings, Chicago, IL, USA.
  4. Ang, K.M. and Morris, G.A. (1984), "Analysis of three-dimensional frames with flexible beam-column connections", Can. J. Civil Eng., 11(2), 245-254. https://doi.org/10.1139/l84-037
  5. ANSI/AISC 358-05 (2005), Prequalified connections for special and intermediate steel moment frames for seismic applications; American Institute of Steel Construction, Chicago, IL, USA.
  6. Awkar, J.C. and Lui, E.M. (1999), "Seismic analysis and response of multistory semirigid frames", Eng.Struct., 21(5), 425-441. https://doi.org/10.1016/S0141-0296(97)00210-1
  7. Bahaari, M.R. and Sherbourne, A.N. (1994), "Computer modelling of an extended endplate bolted connection", Comput. Struct., 52(5), 879-893. https://doi.org/10.1016/0045-7949(94)90073-6
  8. Borgsmiller, J.T. (1995), "Simplified method for design of moment endplate connections", M.S. Thesis; Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
  9. Drosopoulos, G.A., Stavroulakis, G.E. and Abdalla, K.M. (2012), "3D finite element analysis of end-plate steel joints", Steel Compos. Struct., Int. J., 12(2), 93-115.
  10. FEMA (1997), FEMA-302 - NEHRP recommended provisions for seismic regulations for new buildings; Federal Emergency Management Agency, Washington, D.C., USA.
  11. FEMA (2000a), FEMA-356 - Rehabilitation of buildings, prepared by ASCE for federal Emergency Management Agency (Prepared by ASCE); Federal Emergency Management Agency, Washington, D.C., USA.
  12. FEMA (2000b), FEMA-350 - Recommended seismic design criteria for new steel moment-frame buildings (prepared by SAC joint venture); Federal Emergency Management Agency, Washington, D.C., USA.
  13. Ghassemieh, M. and Kiani, J. (2013), "Seismic evaluation of reduced beam section frames considering connection flexibility", Struct. Des. Tall Spec. Build., 22(16), 1248-1269. https://doi.org/10.1002/tal.1003
  14. Ghassemieh, M., Kukreti, A.R. and Murray, T.M. (1983), "Inelastic finite element analysis of stiffened endplate moment connections", Research Report No. FSEL/MBMA 83-02; Fears Structural Engineering Laboratory, School of Civil Engineering and Environmental Science, University of Oklahoma, Norman, OK, USA.
  15. Ghassemieh, M., Shamim, I. and Gholampour, A.A. (2014), "Influence of the axial force on the behavior of endplate moment connections", Struct. Eng. Mech., Int. J., 49(1), 23-40. https://doi.org/10.12989/sem.2014.49.1.023
  16. Gorgun, H. (2013), "Geometrically nonlinear analysis of plane frames composed of flexibly connected members", Struct. Eng. Mech., Int. J., 45(3), 277-309. https://doi.org/10.12989/sem.2013.45.3.277
  17. Gorgun, H. and Yilmaz, S. (2012), "Geometrically nonlinear analysis of plane frames with semi-rigid connections accounting for shear deformations", Struct. Eng. Mech., Int. J., 44(4), 539-569. https://doi.org/10.12989/sem.2012.44.4.539
  18. Jin, J. and El-Tawil, S. (2005), "Seismic performance of steel frames with reduced beam section connections", J. Construct. Steel Res., 61(4), 453-471. https://doi.org/10.1016/j.jcsr.2004.10.006
  19. Kukreti, A.R., Murray, T.M. and Ghassemieh, M. (1990), "Behavior and design of large capacity moment end-plates", Struct. Eng., ASCE, 116(3), 809-828. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:3(809)
  20. Lui, E.M. and Lopes, A. (1997), "Dynamic analysis and response of semi rigid frames", Eng. Struct., 19(8), 644-654. https://doi.org/10.1016/S0141-0296(96)00143-5
  21. Maggi, Y.I., Goncalves, R.M., Leon, R.T. and Ribeiro, L.F.L. (2005), "Parametric analysis of steel bolted end-plate connections using finite element modeling", J. Construct. Steel Res., 61(5), 689-708. https://doi.org/10.1016/j.jcsr.2004.12.001
  22. Mazzoni, S., McKenna, F. and Fenves, G.L. (2005), OpenSees command language manual; Pacific Earthquake Engineering Research (PEER) Center.
  23. Mohamadi-Shooreh, M.R. and Mofid, M. (2011), "New modeling for moment-rotation behavior of bolted endplate connections", Scientia Iranica, 18(4), 827-834. https://doi.org/10.1016/j.scient.2011.07.015
  24. Murray, T.M. and Kukreti, A.R. (1988), "Design of 8-bolt stiffened moment end-plates", Eng J., AISC, 25(2), 45-52.
  25. Murray, T.M. and Sumner, E.A. (2003), AISC design guide series 4 (extended end-plate moment connections); American Institute of Steel Construction, Chicago, IL, USA.
  26. Nader, M.N. and Astaneh, A. (1991), "Dynamic behavior of flexible, semirigid and rigid steel frames", J. Construct. Steel Res., 18(3), 179-192. https://doi.org/10.1016/0143-974X(91)90024-U
  27. Popov, E.P. and Tsai, K.C. (1989), "Performance of large seismic steel moment connections under cyclic loads", Eng. J., 26(2), 51-60.
  28. Sumner, E.A. (2003), "Unified design of extended end-plate moment connections subject to cyclic loading", Ph.D. Dissertation; Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
  29. Tsai, K. and Popov, E. (1990), "Cyclic behavior of end-plate moment connections", J. Struct. Eng., 116(11), 2917-2930. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(2917)
  30. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141

피인용 문헌

  1. Strength and stiffness modeling of extended endplate connections with circular and rectangular bolt configurations vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.323
  2. An optimization model for synchronous road geometric and pavement enhancements vol.8, pp.3, 2015, https://doi.org/10.1016/j.jtte.2019.03.008