DOI QR코드

DOI QR Code

Estimation of Punching Shear Strength for Ultra High Performance Concrete Thin Slab

강섬유 보강 초고성능 콘크리트 슬래브의 뚫림 전단 성능 평가

  • Park, Ji-Hyun (Department of Architecture and Architectural Engineering, Seoul National University) ;
  • Hong, Sung-gul (Department of Architecture and Architectural Engineering, Seoul National University)
  • 박지현 (서울대학교 공과대학 건축학과) ;
  • 홍성걸 (서울대학교 공과대학 건축학과)
  • Received : 2015.02.23
  • Accepted : 2015.03.31
  • Published : 2015.06.15

Abstract

UHPC(Ultra High Performance Concrete) is used widely with its remarkable performance, such as strength, ductility and durability. Since the fibers in the UHPC can control the tensile crack, the punching shear capacity of UHPC is higher than that of the conventional concrete. In this paper, seven slabs with different thickness and fiber volume ratio were tested. The ultimate punching shear strength was increased with the fiber volume ratio up to 1%. The shear capacity of specimens with the fiber content 1% and 1.5% do not have big differences. The thicker slab has higher punching shear strength and lower deformation capacity. The critical sections of punching shear failure were similar regardless of the fiber volume ratio, but it were larger in thicker slab.

Keywords

References

  1. Kwon, and et al., "Development of Ultra-High Performance Hybrid Fiber-Reinforced Cement-Based Composites", ACI Materials Journal, Vol.111, pp.309-318, 2014
  2. Joh., and et al., "Punching Shear Strength of Deck Slabs Made of Ultra High Performance Concrete", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.15, No.4, pp221-231, 2011 (in Korean) https://doi.org/10.11112/jksmi.2011.15.4.221
  3. AFGC, "Ultra High Performance Fiber-reinforced Concrete Recommendations", AFGC, p.358, 2013
  4. KCI, "Design Guidelines for Ultra High Performance Concrete K-UHPC Structure", Korea Concrete Institute, 2012