Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Interlaminar Shear Strength of Carbon Fiber Epoxy Composite with Nickel Film

니켈 박막 첨가에 따른 탄소섬유 에폭시 복합재료의 층간 계면 특성

  • Lee, Min-Kyung (The 4th R&D Institute-4, Agency for Defense Development)
  • Received : 2015.02.23
  • Accepted : 2015.06.29
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper reports the effects of nickel film interleaves on the interlaminar shear strength(ILSS) of carbon fiber reinforced epoxy composites(CFRPs). A nickel thin film was deposited onto the prepreg by radio frequency(RF) sputtering at room temperature. The ILSS of the nickel film interleaved hybrid composites was increased compared to that of the composites without interleaves. To understand the mechanism of enhancement of the ILSS, the fracture surface of the tested specimens was examined by scanning electron microscopy(SEM). The metal interleaves were acted as a reinforcement for the matrix rich interface and the shear property of their composites improved by enhancing the resistance to matrix cracking.

탄소섬유 에폭시 복합재료에 다양한 두께의 니켈 박막을 첨가한 복합재료를 제작하여 층간 계면 특성을 평가하고자 한다. 상온에서 스퍼터를 이용하여 니켈 박막을 프리프레그 위에 증착하고 이를 중간층으로 하여 복합재료를 제작하였다. 니켈 박막이 첨가된 탄소섬유 에폭시 복합재료는 니켈 박막 미첨가 탄소섬유 에폭시 복합재료에 비해 층간 전단 특성이 향상되었음을 확인하였다. 층간 파괴거동 분석을 위해 주사전자현미경으로 파단면을 관찰하였으며 니켈 박막이 복합재료 내에 층간 결합력을 높여 계면 특성을 향상시키며 전단시험 시 전단에너지를 흡수하는 역할을 한다는 것을 확인하였다.

Keywords

References

  1. (International Journal) Udupa, G., Shrikantha rao, S., and Gangadharan, K.V., "Future Applications of Carbon Nanotube Reinforced Functionally Graded Composite Materials," International Conference On Advances In Engineering, 2012, pp. 399-404.
  2. (Korean Journal) Hong, M.S., Bae, K.M., Choi, W.K., Lee, H.S., Park. S.J., An, K.H., and Kim, B.J., "Technique Status of Carbon Fibers-reinforced Composites for Aircrafts," Appl. Chem. Eng., Vol. 23, No. 3, 2012, pp. 313-319.
  3. (International Journal) Song, L., Zhang, H., Zhang, Z., and Xie, S., "Processing and Performance Improvements of SWNT Paper Reinforced PEEK Nanocomposites," Composites: Part A, Vol. 38, No. 388-392, 2007. https://doi.org/10.1016/j.compositesa.2006.03.007
  4. (International Journal) Khan, S.U. and Kim, J.K., "Improved Interlaminar Shear Properties of Multiscale Carbon Fiber Composites with Bucky Paper Interleaves Made from Carbon Nanofibers," Carbon, Vol. 50, No. 14, 2012, pp. 5265-5277. https://doi.org/10.1016/j.carbon.2012.07.011
  5. (International Journal) Zhou, Y., Jeelani, S., and Lacy, T., "Experimental Study on the Mechanical Behavior of Carbon/epoxy Composites with a Carbon Nanofiber-Modified Matrix," Journal of Composite Materials, Vol. 48, No. 29, 2014, pp. 3659-3672. https://doi.org/10.1177/0021998313512348
  6. (International Journal) Hong, M.S., Bae, K.M., Choi, W.K., Lee, H.S., Park, S.J., An, K.H., and Kim, B.J., "A Study on Mechanical Interfacial Properties of Copper-plated Carbon Fibers/Epoxy composites," Applied Chemistry for Engineering, Vol. 23, No. 3, 2012, pp. 313-319.
  7. (International Journal) Dransfield, K., Baillie, C., and Mai, Y.W., "Improving the Delamination Resistance of CFRP by Stitching," Composites Science and Technology, Vol. 50, No. 3, 305-317, 1994. https://doi.org/10.1016/0266-3538(94)90019-1
  8. (International Journal) Guo, M., Yi, X., Liu, G., and Liu, L., "Simultaneously Increasing the Electrical Conductivity and Fracture Toughness of Carbon-fiber Composites by Using Silver Nanowires-loaded Interleaves," Composites Science and Technology, Vol. 97, No. 27-33, 2014.
  9. (International Journal) Gilbert, Eric N., Hayes, Brian, S., and Seferis, James C., "Variable Density Composite Systems Constructed by Metal Particle Modified Prepregs," Journal of Composite Materials, Vol. 36, No. 17, 2002, pp. 2045-2060. https://doi.org/10.1177/0021998302036017249
  10. (International Journal) Bortz, D.R., Merino, C., and Martin-Gullon, I., "Mechanical Characterization of Hierarchical Carbon Fiber/nanofiber Composite Laminates," Composite:Part A, 2011, pp. 1584-1591.
  11. (International Journal) Ostapiuk, M., Surowska, B., and Bienias, J., "Interface Analysis of Fiber Metal Laminates," Composite Interfaces, 2014, pp. 309-318.
  12. (Thesis) Yuri Ebata, "Bending, Wrinkling, and Folding of Thin Polymer Film/Elastomer Interfaces," Dissertations. Paper, 2013.