Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Vibrations of truncated shallow and deep conical shells with non-uniform thickness

  • Kang, Jae-Hoon (Department of Architectural Engineering, Chung-Ang University)
  • Received : 2014.07.13
  • Accepted : 2014.11.06
  • Published : 2015.07.10
⟨ Previous Next ⟩

Abstract

A three-dimensional (3-D) method of analysis is presented for determining the natural frequencies of a truncated shallow and deep conical shell with linearly varying thickness along the meridional direction free at its top edge and clamped at its bottom edge. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components $u_r$, $u_{\theta}$, and $u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be periodic in ${\theta}$ and in time, and algebraic polynomials in the r and z directions. Strain and kinetic energies of the truncated conical shell with variable thickness are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated. The frequencies from the present 3-D method are compared with those from other 3-D finite element method and 2-D shell theories.

Keywords

Acknowledgement

Supported by : Chung-Ang University

References

  1. Buchanan, G.R. (2000), "Vibration of truncated conical cylinders of crystal class 6/mmm", J. Vib. Control, 6, 985-998. https://doi.org/10.1177/107754630000600702
  2. Buchanan, G.R. and Wong, F.T.I. (2001), "Frequencies and mode shapes for thick truncated hollow cones", Int. J. Mech. Sci., 43, 2815-2832. https://doi.org/10.1016/S0020-7403(01)00068-6
  3. Irie, T., Yamada, G. and Kaneko, Y. (1982), "Free vibration of a conical shell with variable thickness", J. Sound Vib., 82(1), 83-94. https://doi.org/10.1016/0022-460X(82)90544-2
  4. Jin, G., Ma, X., Shi, S., Ye, T. and Liu, Z. (2014a), "A modified Fourier series solution for vibration analysis of truncated conical shells with general boundary conditions", Appl. Acoust., 85, 82-96. https://doi.org/10.1016/j.apacoust.2014.04.007
  5. Jin, G., Su, Z., Shi, S., Ye, T. and Gao, S. (2014b), "Three-dimensional exact solution for the free vibration of arbitrarily thick functionally graded rectangular plates with general boundary conditions", Compos. Struct., 108, 565-577. https://doi.org/10.1016/j.compstruct.2013.09.051
  6. Jin, G., Xie, X. and Liu, Z. (2014c), "The Haar wavelet method for free vibration analysis of functionally graded cylindrical shells based on the shear deformation theory", Compos. Struct., 108, 435-448. https://doi.org/10.1016/j.compstruct.2013.09.044
  7. Jin, G., Ye, T., Chen, Y., Su, Z. ad Yan, Y. (2013a), "An exact solution for the free vibration analysis of laminated composite cylindrical shells with general elastic boundary conditions", Compos. Struct., 106, 114-127. https://doi.org/10.1016/j.compstruct.2013.06.002
  8. Jin, G, Ye, T., Jia, X. and Gao, S. (2014), "A general Fourier solution for the vibration analysis of composite laminated structure elements of revolution with general elastic restraints", Compos. Struct., 109, 150-168. https://doi.org/10.1016/j.compstruct.2013.10.052
  9. Jin, G., Ye, T., Ma, X., Chen, Y., Su, Z. and Xie, X. (2013b), "A unified approach for the vibration analysis of moderately thick composite laminated cylindrical shells with arbitrary boundary conditions", Int. J. Mech. Sci., 75, 357-376. https://doi.org/10.1016/j.ijmecsci.2013.08.003
  10. Leissa, A.W. (1993), Vibration of shells, The Acoustical Society of America.
  11. Leissa, A.W. and So, J. (1995), "Three-dimensional vibrations of truncated hollow cones", J. Vib. Control, 1, 145-158. https://doi.org/10.1177/107754639500100202
  12. Malekzadeh, P., Fiouz, A.R. and Sobhrouyan, M. (2012), "Three-dimensional free vibration of functionally graded truncated conical shells subjected to thermal environment", Int. J. Pres. Vess. Pip., 89, 210-221. https://doi.org/10.1016/j.ijpvp.2011.11.005
  13. McGee, O.G. and Leissa, A.W. (1991), "Three-dimensional free vibrations of thick skewed cantilever plates", J. Sound Vib., 144, 305-322. https://doi.org/10.1016/0022-460X(91)90751-5
  14. Sankaranarayanan, N., Chandrasekaran, K. and Ramaiyan, G. (1987), "Axisymmetric vibrations of laminated conical shells of variable thickness", J. Sound Vib., 118(1), 151-161. https://doi.org/10.1016/0022-460X(87)90260-4
  15. Sofiyev, A.H. (2014a), "Large-amplitude vibration of non-homogeneous orthotropic composite truncated conical shell", Compos. Part B: Eng., 61, 365-374. https://doi.org/10.1016/j.compositesb.2013.06.040
  16. Sofiyev, A.H. (2014b), "The influence of non-homogeneity on the frequency-amplitude characteristics of laminated orthotropic truncated conical shell", Compos. Struct., 107, 334-345. https://doi.org/10.1016/j.compstruct.2013.08.002
  17. Su, Z., Jin, G., Shi, S., Ye, T. and Jia, X. (2014a), "A unified solution for vibration analysis of functionally graded cylindrical, conical shells and annular plates with general boundary conditions", Int. J. Mech. Sci., 80, 62-80. https://doi.org/10.1016/j.ijmecsci.2014.01.002
  18. Su, Z., Jin, G. and Ye, T. (2014b), "Three-dimensional vibration analysis of thick functionally graded conical, cylindrical shell and annular plate structures with arbitrary elastic restraints", Compos. Struct., 118, 432-447. https://doi.org/10.1016/j.compstruct.2014.07.049
  19. Qu, Y., Long, X., Yuan, G. and Meng, G. (2013a), "A unified formulation for vibration analysis of functionally graded shells of revolution with arbitrary boundary conditions", Compos. Part B: Eng., 50, 381-402. https://doi.org/10.1016/j.compositesb.2013.02.028
  20. Qu, Y., Long, X., Wu, S. and Meng, G. (2013b), "A unified formulation for vibration analysis of composite laminated shells of revolution including shear deformation and rotary inertia", Compos. Struct., 98, 169191.
  21. Taher, H.R.D., Omidi, M., Zadpoor, A.A. and Nikooyan, A.A. (2006), "Free vibration of circular and annular plates with variable thickness and different combinations of boundary conditions", J. Sound Vib., 296, 1084-1092. https://doi.org/10.1016/j.jsv.2006.03.022
  22. Viswanatham, K.K. and Navaneethakrishnan, P.V. (2005), "Free vibration of layered truncated conical shell frusta of differently varying thickness by the method of collocation with cubic and quintic splines", Int. J. Solid. Struct., 42, 1129-1150. https://doi.org/10.1016/j.ijsolstr.2004.06.065
  23. Ye, T., Jin, G., Chen, Y., Ma, X. and Su, Z. (2013), "Free vibration analysis of laminated composite shallow shells with general elastic boundaries", Compos. Struct., 106, 470-490. https://doi.org/10.1016/j.compstruct.2013.07.005
  24. Ye, T., Jin, G., Shi, S. and Ma, X. (2014), "Three-dimensional free vibration analysis of thick cylindrical shells with general end conditions and resting on elastic foundations", Int. J. Mech. Sci., 84, 120-137. https://doi.org/10.1016/j.ijmecsci.2014.04.017

Cited by

  1. Buckling of thick deep laminated composite shell of revolution under follower forces vol.58, pp.1, 2016, https://doi.org/10.12989/sem.2016.58.1.059
  2. Vibration of two types of porous FG sandwich conical shell with different boundary conditions vol.79, pp.4, 2015, https://doi.org/10.12989/sem.2021.79.4.401