DOI QR코드

DOI QR Code

The dispersion of the flexural waves in a compound hollow cylinder under imperfect contact between layers

  • Ipek, Cengiz (Member of 2nd Committee of Kocaeli Chamber of Commerce)
  • Received : 2014.12.28
  • Accepted : 2015.06.15
  • Published : 2015.07.25

Abstract

The influence of the interface imperfect bonding on the flexural wave dispersion in the bilayered hollow circular cylinder is studied with utilizing three-dimensional linear theory of elastodynamics. The shear-spring type model is used for describing the imperfect bonding on the interface between the layers and the degree of the imperfectness is estimated through the dimensionless shear-spring parameters which enter the mentioned model. The method for finding the analytical expressions for the sought values and dispersion equation are discussed and detailed. Numerical results on the lowest first and second modes are presented and analyzed. These results are obtained for various values of the shear-spring parameters. According to these results, in particular, it is established that as a results of the imperfection of the bonding between the layers the new branches of the dispersion related the first fundamental mode arise and the character of the dispersion curve related to the second mode becomes more complicated.

Keywords

References

  1. Abramson, N.H. (1957), "Flexural waves in elastic beams of circular cross section", J. Acoust. Soc. Am., 29(1), 42-46. https://doi.org/10.1121/1.1908676
  2. Akbarov, S.D. (2013), "Flexural wave dispersion in finitely pre-strained solid and hollow circular cylinders made of compressible materials", CMES: Comput. Model. Eng. Sci., 92(4), 387-421.
  3. Akbarov, S.D. (2015), Dynamics of Pre-Strained Bi-Material Elastic Systems: Linearized Three Dimensional Approach, Springer International Publishing, Switzerland.
  4. Akbarov, S.D. and Ipek C. (2010), "The influence of the imperfectness of the interface conditions on the dispersion of the axisymmetric longitudinal waves in the pre-strained compound cylinder", CMES:Comput. Model. Eng. Sci., 70(2), 93-121.
  5. Akbarov, S.D. and Ipek C. (2012), "Dispersion of axisymmetric longitudinal waves in a pre- strained imperfectly bonded bi-layered hollow cylinder", CMC: Comput. Mater. Contin., 32(2), 99-144.
  6. Akbarov, S.D. and Ipek C. (2015), "Influence of an imperfection of interfacial contact on dispersion of flexural waves in a compound cylinder", MCM: Mech. Compos. Mater., 51(2), 191-198. https://doi.org/10.1007/s11029-015-9489-4
  7. Berger, J.R., Martin, P.A., and McCaffery, S.J. (2000), "Time-harmonicntorsional waves in a composite cylinder with an imperfect interface", J. Acoust. Soc. Am., 107(3), 1161-1167. https://doi.org/10.1121/1.428405
  8. Eringen, A.C. and Suhubi, E.S. (2004), Elastodynamics, Vol. II, Linear Theory, Acad. Press New York and London.
  9. Guz, A.N. (2004), Elastic Waves in Bodies with Initial (Residual) Stresses, A.S.K, Kiev. (in Russian)
  10. Guz, A.N. and Makhort, F.G. (2000), "Physical principles of ultrasonic non-destructive method of determination of stresses in rigid solids", Int. Appl. Mech., 36, 3-34.
  11. Huang, Y and Li, X.F. (2010), "Shear waves guided by the imperfect interface of two magnetoelectric materials", Ultrasonics, 50, 750-757. https://doi.org/10.1016/j.ultras.2010.03.001
  12. Liu, J., Wang, Y. and Wang, B. (2010), "Propagation of shear horizontal surface waves in a layered piezoelectric half- space with an imperfect interface", IEEE Tran. Ultrason. Ferroel. Freq. Control., 57(8), 1875-1879. https://doi.org/10.1109/TUFFC.2010.1627
  13. Jones, J.P. and Whitter J.S. (1967), "Waves at a flexibly bonded interface", J. Appl. Mech., 34, 905-909. https://doi.org/10.1115/1.3607854
  14. Kadioglu, N and Ataoglu, S. (2010), "Propagation of axial symmetric, transient waves from a cylindrical cavity", KSCE J. Civil Eng., 14(4), 565-577. https://doi.org/10.1007/s12205-010-0565-y
  15. Kepceler, T. (2010), "Torsional wave dispersion relations in a pre-stressed bi-material compound cylinderwith an imperfect interface", Appl. Math. Model., 34, 4058-4073. https://doi.org/10.1016/j.apm.2010.03.038
  16. Kucukarslan, S. (2009), "Numerical analysis of higher dimensional dispersive long wave equation", Arch. Appl. Mech., 79, 433-440. https://doi.org/10.1007/s00419-008-0241-6
  17. Leungvichcharoen, S. and Wijeyewickrema, A.C. (2003), "Dispersion effects of extensional waves in prestressed imperfectly bonded incompressible elastic layered composites", Wave Motion., 38, 311-325. https://doi.org/10.1016/S0165-2125(03)00064-7
  18. Martin, P.A. (1992), "Boundary integral equations for the scattering of elastic waves by elastic inclusions with thin interface layers", J. Nondestr. Eval., 11, 167-74. https://doi.org/10.1007/BF00566407
  19. Pecorari, C. (2001), "Scattering of a Rayleigh wave by a surface-breaking crack with faces in partial contact", Wave Motion., 33, 259-270. https://doi.org/10.1016/S0165-2125(00)00070-6
  20. Kumara, R. and Singh, M. (2009), "Effect of rotation and imperfection on reflection and transmission of plane waves in an isotropic generalized thermoelastic media", J. Sound Vib., 324, 773-797. https://doi.org/10.1016/j.jsv.2009.02.024
  21. Pang, Y. and Liu, J.X. (2011), "Reflection and transmission of plane waves at an imperfectly bonded interface between piezoelectric and piezomagnetic media", Eur. J. Mech. A/Solid., 30, 731-740. https://doi.org/10.1016/j.euromechsol.2011.03.008
  22. Zhou, Y.Y., Lu, C.F. and Chen, W.Q. (2012), "Bulk wave propagation in layered Piezomagnetic piezoelectric plates with initial stresses or interface imperfections", Compos. Struct., 94, 2736-2745. https://doi.org/10.1016/j.compstruct.2012.04.006

Cited by

  1. Guided wave propagation in cylindrical structures with sector cross-sections vol.87, pp.7, 2017, https://doi.org/10.1007/s00419-017-1237-x
  2. Response of angle-ply laminated cylindrical shells with surface-bonded piezoelectric layers vol.76, pp.5, 2015, https://doi.org/10.12989/sem.2020.76.5.599