DOI QR코드

DOI QR Code

Inelastic Out-of-plane Design of Parabolic Arches

  • 발행 : 2015.06.30

초록

In this paper, improved out-of-plane design of parabolic arches was proposed based on the current design code. The arches resist general loading by a combination of axial compression and bending actions, and the interaction formula between two extreme cases of axial and bending actions is generally used for the design. Firstly, the out-of-plane buckling strength of arches in a pure axial compression and a pure bending were studied. Then, out-of-plane design of parabolic aches under general transverse loading was investigated. From the results, it can be found that the proposed design equations provided good prediction of out-of-plane strength for parabolic arches which satisfy the thresholds for deep arches, while proposed design equations overestimated the buckling load of shallow arches.

키워드

참고문헌

  1. AASHTO. (2004). AASHTO LRFD bridge design specifications. 3rd ed. Washington DC.
  2. ABAQUS (2009). ABAQUS analysis user's manual version 6.9-2, Dassault Systemes Simulia Corp., Providence, RI, USA.
  3. European committee for standardization.(2003). Eurocode3. Design of steel structure.
  4. Moon J., Yoon K.-Y., Lee T.-H. and Lee H.-E. (2009a). "Out-of-plane Buckling of Arches with Varying Curvature," KSCE Journal of Civil Engineering, Vol. 16, No. 6, pp. 441-451.
  5. Moon J., Yoon K.-Y., Lee T.-H. and Lee H.-E. (2009b). "In-Plane Strength and Design of Parabolic Arches," Eng Struct, Vol. 31, pp. 444-454. https://doi.org/10.1016/j.engstruct.2008.09.009
  6. Komatsu S, Sakimoto T. (1977). "Ultimate Load Carrying Capacity of Steel Arches," J Struct Div, ASCE, 103(ST12), pp. 2323-36.
  7. Sakimoto T, Komatsu S. (1983). "Ultimate Strength Formula for Steel Arches," J Struct Engrg, ASCE, Vol. 109, No. 3, pp. 613-27. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:3(613)
  8. Pi Y-L, Trahair NS. (1998). "Out-of-plane Inelastic Buckling and Strength of Steel Arches," J Struct Engrg, ASCE, Vol. 124, No. 2, pp. 174-83. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(174)
  9. Pi Y-L, Trahair NS. (2000). "Inelastic Buckling Strength and Design of Steel Arches," Eng Struct, Vol. 22, pp. 993-1005. https://doi.org/10.1016/S0141-0296(99)00032-2