한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제29권3호
  • /
  • Pages.224-230
  • /
  • 2015
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

CFD를 이용한 컨테이너 선형의 트림별 저항성능 해석

Analysis of Resistance Performance for Various Trim Conditions on Container ship Using CFD

  • 투고 : 2015.03.16
  • 심사 : 2015.06.22
  • 발행 : 2015.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Vessels are traditionally optimized for a single condition, normally the contract speed at the design draft. The actual operating conditions quite often differ significantly. At other speed and draft combinations, adjusting the trim can often be used to reduce the hull resistance. Changing the trim is easily done by shifting ballast water. There are several ways to assess the effect of the trim on the hull resistance and fuel consumption, including in-service measurements, model tests, and CFD. In this paper, CFD is employed for the assessment of the resistance performance according to the trim conditions. The commercial CFD code of the STAR-CCM+ is utilized to evaluate the ship’s resistance performance on a 6,800 TEU container ship. To validate of the effectiveness of STAR-CCM+, the experimental result of the KCS hull form is compared with the result from STAR-CCM+. It is found that the total resistance of the 6,8000 TEU container ship was reduced by 2.6% in the case of a 1-m trim by head at 18knots.

키워드

참고문헌

  1. Buhaug, O., Corbertt, J.J., Endresen, O., Eyring, V., Faber, J., Hanayama, S., Lee, D.S., Lee, D., Lindstad, H., Mjelde, A, Palsson, C., Wanquing, W., Winebrake, J.J., Yoshida, K., 2009. Second IMO GHG study. 1-40.
  2. Cariou, P., 2011. Is Slow Steaming a Sustainable Means of Reducing CO2 Emissions from Container Shipping. Transportation Research Part D: Transport and Environment, 16, 260-264. https://doi.org/10.1016/j.trd.2010.12.005
  3. Choi, J.-K., Kim, H.-T., 2010. A Study of using Wall Function for Numerical Analysis of High Reynolds Number Turbulent Flow. Journal of the Society of Naval Architects of Korea, 47(5), 347-655.
  4. Corbett, J.J., Wangb, H., Winerbrake, J.J., 2009. The Effectiveness and Costs of Speed Reductions on Emissions from International Shipping. Transportation Research Part D: Transport and Environment, 14(6), 593-598. https://doi.org/10.1016/j.trd.2009.08.005
  5. Hearn, G.E., Wright, P.N.H., 1999. Design for Optimal Hydrodynamic Operation of Large Container Ships. RINA lnternational Coriference on Design and Operation of Container Ships, 5-13.
  6. Hong, S.-W., 1971. An Experimental Study on Mean Sinkage and Trim Change in Run and Form Factor of Full Hull Form. Journal of the Society of Naval Architects of Korea, 8(1), 29-40.
  7. Yang, J., Lee, S.-H., Kim, H., 2006. A Study on the Effect fo the Heeled and Trimmed Conditions on Propulsive Performance of VLCC. Journal of the Society of Naval Architects of Korea, 43(3), 275-285. https://doi.org/10.3744/SNAK.2006.43.3.275
  8. Kim, W.-Y., 2014. CFD Analysis on Estimation of Required Power According to Ship's Optimum Trim. Master's Thesis, Pusan University, Korea.
  9. Lee, J.-K., 2012. Study on the Resistance Performance of Ships with Initial Trim. Master's Thesis, Korea Maritime University, Korea.
  10. Park, D.-W., Lee, S.-B., Chung, S.-S., Seo, H.-W., Kwon, J.-W., 2013. Effect of Trim on Resistance Performance of a Ship. Jounal of the Society of Naval Architects of Korea, 50(2), 88-94. https://doi.org/10.3744/SNAK.2013.50.2.88
  11. Park, J., Kim, N., 2014. A Comparison and Analysis of Ship Optimal Routing Scenarios considering Ocean Environment. Journal of the Society of Naval Architectures of Korea, 50(2), 99-106.
  12. Park, S.H., Lee, S,-B., Lee, Y.-M., 2014. Study on the Estimation of the Optimum Trims in Container Carriers by using CFD Analysis of Ship Resistance. Journal of the Society of Naval Architects of Korea, 51(5), 429-434. https://doi.org/10.3744/SNAK.2014.51.5.429
  13. Sherbaz, S., Duan, W., 2012. Operational Options for Green Ships. Journal of Marine Science and Application, 11(3), 335-340. https://doi.org/10.1007/s11804-012-1141-2
  14. Sherbaz, S., Duan, W., 2014. Ship Trim Optimization : Assessment of Influence of Trim on Resistance of MOERI Container Ship. The Scientific World Journal, 2014, 1-6.
  15. Van, S., Kim, H., 1987. An Experimental Study on Hull Attitude and Resistance Components of a Ship. Jounal of the Society of Naval Architects of Korea, 24(2), 11-19.

피인용 문헌

  1. Study on Resistance Component of Container Ship According to Trim Conditions vol.29, pp.6, 2015, https://doi.org/10.5574/KSOE.2015.29.6.411