Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Weibull Statistical Analysis on Mechanical Properties in ZrO2 with SiC Additive

SiC 첨가한 ZrO2의 기계적 특성에 대한 와이블 통계 해석

  • Nam, Ki Woo (Dept. of Materials Science and Engineering, Pukyong Nat'l Univ.) ;
  • Kim, Seon Jin (Dept. of Mechanical Design Engineering, Pukyong Nat'l Univ.) ;
  • Kim, Dae Sik (TFT, Hi Air Korea, Co., Ltd.)
  • Received : 2015.02.05
  • Accepted : 2015.07.07
  • Published : 2015.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The Vickers hardness test is a common method used to characterize the hardness of ceramic materials. However, the hardness is not a deterministic value, but is a random variable. The objective of this paper is to investigate the statistical properties of the bending strength and a set of Vickers hardness values in single $ZrO_2$ and composite $ZrO_2/SiC$ with a SiC additive. In this work, we compare the characteristic value and variation with the results based on Weibull statistical analysis. The probability distributions of the bending strength and Vickers hardness agreed relatively well with the Weibull distribution. We evaluate the scale parameter and shape parameter in asreceived $ZrO_2$ and $ZrO_2/SiC$ composite ceramics, as well as in their heat treated ceramics.

비커스 경도 실험은 세라믹스 재료의 경도를 특성화하는데 사용되는 일반적인 실험법이다. 그러나 경도도 하나의 확률변수로 취급하는 것이 일반적이다. 본 연구의 목적은 단상 $ZrO_2$ 와 SiC 첨가한 $ZrO_2/SiC$ 복합 세라믹스의 굽힘강도와 비커스 경도의 통계적 성질을 조사하는 것이다. 본 연구에서는 와이블 통계 해석에 기초하여 그들의 결과를 특성치와 변동을 비교 고찰하였다. 굽힘강도 및 비커스 경도는 모두 와이블 분포에 비교적 잘 적합할 수 있음을 알았다. 또한 단상 $ZrO_2$ 와 SiC 첨가한 $ZrO_2/SiC$ 복합 세라믹스와 그들의 열처리재에 대한 비커스 경도의 확률분포에 대한 척도 및 형상 파라메터 값을 평가하였다.

Keywords

References

  1. Ando, K., Tsuji, K., Hirasawa, T., Kobayashi, Y., Chu, M. C. and Sato, S., 1999, "Crack Healing Behavior and High Temperature Strength of Mulltite/SiC Composite Ceramics," Journal of the Society of Materials Science (Japan), Vol. 48, No. 5, pp. 489-494. https://doi.org/10.2472/jsms.48.489
  2. Ando, K., Houjyou, K., Chu, M. C., Takeshita, S., Takahashi, K., Sakamoto, S. and Sato, S., 2002, "Crack Healing Behavior of $Si_3N_4/SiC$ Ceramics under Stress and Fatigue Strength at the Temperature of Healing," Journal of the European Ceramic Society, Vol. 22, pp. 1339-1346. https://doi.org/10.1016/S0955-2219(01)00435-6
  3. Kim, B. A., Ando, K., Chu, M. C. and Sato, S., 2003, "Crack Healing Behavior of Monolithic Alumina and Strength of Crack-Healed Member," Journal of the Society of Materials Science(Japan), Vol. 52, No. 6, pp. 667-673. https://doi.org/10.2472/jsms.52.667
  4. Nam, K. W., Kim, M. K., Park, S. W., Ahn, S. H. and Kim, J. S., 2007, "Crack Healing Behavior and Bending Strength of $Si_3N_4/SiC$ Composite Ceramics by $SiO_2$ Colloidal," Materials Science and Engineering( A), Vol. 471, Nos. 1-2, pp. 102-105. https://doi.org/10.1016/j.msea.2007.03.005
  5. Kim, H. S., Kim, M. K., Kim, J. W., Ahn, S. H. and Nam, K. W., 2007, "Strength of Crack Healed-Specimen and Elastic Wave Characteristics of $Al_2O_3/SiC$ Composite Ceramics," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 4, pp. 425-431. https://doi.org/10.3795/KSME-A.2007.31.4.425
  6. Nam, K. W., Kim, H. S., Son, C. S., Kim, S. K. and Ahn, S. H., 2007, "Crack Healing and Elevated Temperature Bending Strength of $Al_2O_3$ Composite Ceramics by an amount of $Y_2O_3$," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 11, pp. 1108-1114. https://doi.org/10.3795/KSME-A.2007.31.11.1108
  7. Nam, K. W., Park, S. W., Do, J. Y. and Ahn, S. H., 2008, "Crack Healing and Bending Strength of $Si_3N_4$ Ceramics," Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 11, pp. 957-962. https://doi.org/10.3795/KSME-A.2008.32.11.957
  8. Hori, S., 1990, Kyoujin Jirukonia, Uchidaroukakuho, Tokyo, pp. 106-112.
  9. Kim, S. J., Kong, Y. S. and Lee, S. Y., 2009, "Weibull Statistical Analysis of Micro-Vickers Hardness using Monte-Carlo Simulation," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 4, pp. 346-352. https://doi.org/10.3795/KSME-A.2009.33.4.346
  10. Gong, J. H., Wu, J. J. and Guan, Z. D., 1999, "Examination of the Indentation Size Effect in Low-load Vickers Hardness Testing of Ceramics," Journal of the European Ceramic Society, Vol. 19, pp. 2625-2631. https://doi.org/10.1016/S0955-2219(99)00043-6

Cited by

  1. Composites Ceramics by Different Shot Size vol.40, pp.12, 2016, https://doi.org/10.3795/KSME-A.2016.40.12.987
  2. Weibull Statistical Analysis on the Mechanical Properties of SiC by Immersion in Acidic and Alkaline Solutions vol.40, pp.9, 2016, https://doi.org/10.3795/KSME-A.2016.40.9.767