DOI QR코드

DOI QR Code

비점성 유동을 가정한 포 발사 램제트 추진탄 설계

Design of Gun Launched Ramjet Propelled Artillery Shell with Inviscid Flow Assumption

  • Kang, Shinjae (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) ;
  • Park, Chul (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) ;
  • Jung, Woosuk (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kwon, Taesoo (Defense R&D Institute) ;
  • Park, Juhyeon (Defense R&D Institute) ;
  • Kwon, Sejin (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2015.06.01
  • 심사 : 2015.06.26
  • 발행 : 2015.08.01

초록

최근 군 전력 개편에 따라 1개 군단이 담당해야할 작전 영역이 확대됨에 따라 155 mm 화포체계의 사거리 연장은 중요한 이슈가 되었다. 80 km 이상 155 mm 화포 체계의 사거리를 연장하기 위해 새로 운 시도가 필요하다. 램제트 기관은 공기흡입식 기관으로 고체 연료 로켓에 비해 몇 배 이상 높은 비추력을 제공할 수 있어 같은 연료 무게로 더 멀리 포탄을 투사하는 것을 가능하게 한다. 램제트 기관을 포로 발사할 경우 포구 초속이 약 Mach 3 이므로 추가적인 부스터가 필요치 않다. 특히 고체 연료 램제트 (Solid Fuel Ram Jet, SFRJ)는 어떠한 구동기관이 없어 발사 시 높은 충격을 받는 포탄에 적용하기에 적합하다. 본 연구에서는 155 mm 화포체계를 위한 포발사 램제트 추진탄을 설계하기 위해 비점성 유동을 가정하여 공기 흡입구, 연소실, 노즐을 설계하였다. 설계 변수를 변화시키며 80 km 이상 사거리를 가지며, 고폭탄 탑재 용적을 최대화 할 수 있도록 설계하였다.

Operation area of corps was expanded under military reformation, and extending range of 155 mm howitzer became important issue. New approach is needed to extend range to 80 kim. Ramjet engine is air breathing engine, and it can provide specific impulse several times more than solid rocket motor so that range is extended using same weight of propellant. If the ramjet engine is gun-launched system, it does not require any other booster because muzzle velocity is near Mach 3. Especially solid fuel ramjet (SFRJ) does not have any moving part so that it is favorable for gun-launching system which is under high stress during launching. In this paper, we design air intake, combustion chamber, and nozzle of 155 mm gun launched ramjet propelled artillery shell with inviscid flow assumption. We conduct parameter study to have range more than 80 km, and maximum high explosive volume.

키워드

참고문헌

  1. No, H., "Defense Reform Plan 2012-2030 Diagnostic and Future Defense Reform Strategy," Research for Strategy, Vol. 19, No. 56, pp. 39-84, 2012.
  2. Poongsan, "Ammunition & Explosives," Poongsan catalogue, pp. 6, 7, and 11, 2015.
  3. Fry, S.R., "A Century of Ramjet Propulsion Technology Evolution," Journal of Propulsion and Power, Vol. 20, No. 1, pp. 27-58, 2004. https://doi.org/10.2514/1.9178
  4. Andersson, K., "SOFRAM-Report of Completed Firing Tests during 2000, along with a Revies of Former Activities and Discussion of the Future," Swedish Defense Research Agency, FOI-R-0241-SE, 2001.
  5. Botwin, L. and Simpson, J., "Gun-launched Variable Thrust Ramjet Projectile," US4428293, 31 Jan. 1984.
  6. Chandler, E., "Solid Fuel Ramjet Projectiles," US2799987, 23 July 1957.
  7. Greenwood, M., "Ramjet Propulsion Device," US2989922, 27 June 1961.
  8. Brandon, F., Lampson, M. and Grace, F., "Remjet Powered, Armor Piercing, High Explosive Projectile," US5363766, 15 Nov. 1994.
  9. Lee, M., Kang, S. and Kwon, S., "Comparison between Paraffin and Polyethylene in Hybrid Thruster with Catalytically Decomposed Hydrogen Peroxide," Asia Pacific International Symposium on Aerospace Technology, Takamatsu, Japan, pp. 1-7, Nov. 2013.
  10. McBride, B. and Gordon, S., "Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications," NASA RP-1311, 1994.
  11. Park, C. and Lee, S.H., "Validation of Multi-temperature Nozzle Flow Code NOZNT," 28th AIAA Thermophysics Conference, Orlando, F.L., USA, AIAA-93-2862, July 1993.
  12. Amichai, O., "Performance of Solid Fuel Ramjet Guided Projectile for USN 5"/54 Gun System," Naval Postgraduate School, Monterey, California, USA, 1982.
  13. Yang, I.Y., Park, C., Choi, S.M. and Yang, S.S., "Conceptual Design of Short-Range Two-Stage Scramjet Vehicle," 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, F.L., USA, AIAA 2011-502, Jan. 2011.
  14. Yang, S.S., Kim, J.H., Sohn, D.K., Choi, C.H., Kim, H.J. and Kim, C.T., "Development of Component Technologies for Air Turbo Ramjet Engine," Korea Aerospace Research Institute, Korea, 2007-032, 2000.
  15. United States National Oceanic and Atmospheric Administration, "U.S. Standard Atmosphere 1976," U.S. Government Printing Office, Washington, D.C., USA, 1976.