DOI QR코드

DOI QR Code

A Physico-chemical Change of Dissolving Pulp by Dry Milling and Fractionation

건식분쇄와 분급에 의한 용해용 펄프의 특성변화

  • 김태영 (한국조폐공사 기술연구원) ;
  • 이송민 (한국조폐공사 기술연구원) ;
  • 허용대 (한국조폐공사 기술연구원) ;
  • 김진영 (한국조폐공사 기술연구원) ;
  • 정양진 (한국조폐공사 기술연구원)
  • Received : 2015.08.18
  • Accepted : 2015.10.04
  • Published : 2015.10.30

Abstract

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.

Keywords

References

  1. RISI, World dissolving pulp monitor, Jan. 2014.
  2. Wakelyn, P. J., Bertoniere, N. R., French, A. D., Thibodeaux, D. P., Triplett, B. A., Rousselle, M. A., Goynes, W. R., Jr., Edwards, J. V., Hunter, L., McAlister, D. D., and Gamble, G. R., Cotton Fiber Chemistry and Technology, International Fiber Science and Technology Series, CRC Press, Boca Raton (2007).
  3. Krassig, H. A., Cellulose: Structure, Accessibility and Reactivity, Gordon and Breach Science Publishers, Yverdon, Switzerland (1993).
  4. Wertz, J.-L., Bedue, O., and Mercier, J. P., Cellulose Science and Technology, EPFL press, Lausanne (2010).
  5. Hubbell, C. A. and Ragauskas, A. J., Effect of acid-chlorite de-lignification on cellulose degree of polymerization, Bioresource Technology 101:7410-7415 (2010). https://doi.org/10.1016/j.biortech.2010.04.029
  6. Thygesten, A., Oddershede, J., Lilholt, H., Thomsen, A., and Stahl, K., On the determination of crystallinity and cellulose content in plant fibres, Cellulose 12:563-576 (2005). https://doi.org/10.1007/s10570-005-9001-8
  7. Isogai, A., Advanced Technologies of Cellulose Utilization, CMC Publishing, Tokyo (2008).
  8. Lejeune, A. and Deporez, T., Cellulose: Structure and Properties, Derivatives and Industrial Uses, Nova Science Publishers, New York (2003).
  9. Sjostrom, E., Wood Chemistry, Fundamentals and Applications, Academic press, Orlando, p. 60 (1992).
  10. Liebert, T. F., Heinze, T. J., and Edgar, K. J., Cellulose Solvents; For Analysis, Shaping and Chemical Modification, ACS Symposium Series 1033, Ameican Chemical Society, Washington, DC (2009).