DOI QR코드

DOI QR Code

Numerical evaluation of deformation capacity of laced steel-concrete composite beams under monotonic loading

  • Thirumalaiselvi, A. (Academy of Scientific and Innovative Research) ;
  • Anandavalli, N. (CSIR-Structural Engineering Research Centre, CSIR Campus) ;
  • Rajasankar, J. (Academy of Scientific and Innovative Research) ;
  • Iyer, Nagesh R. (CSIR-Structural Engineering Research Centre, CSIR Campus)
  • 투고 : 2014.11.24
  • 심사 : 2015.09.09
  • 발행 : 2016.01.20

초록

This paper presents the details of Finite Element (FE) analysis carried out to determine the limiting deformation capacity and failure mode of Laced Steel-Concrete Composite (LSCC) beam, which was proposed and experimentally studied by the authors earlier (Anandavalli et al. 2012). The present study attains significance due to the fact that LSCC beam is found to possess very high deformation capacity at which range, the conventional laboratory experiments are not capable to perform. FE model combining solid, shell and link elements is adopted for modeling the beam geometry and compatible nonlinear material models are employed in the analysis. Besides these, an interface model is also included to appropriately account for the interaction between concrete and steel elements. As the study aims to quantify the limiting deformation capacity and failure mode of the beam, a suitable damage model is made use of in the analysis. The FE model and results of nonlinear static analysis are validated by comparing with the load-deformation response available from experiment. After validation, the analysis is continued to establish the limiting deformation capacity of the beam, which is assumed to synchronise with tensile strain in bottom cover plate reaching the corresponding ultimate value. The results so found indicate about $20^{\circ}$ support rotation for LSCC beam with $45^{\circ}$ lacing. Results of parametric study indicate that the limiting capacity of the LSCC beam is more influenced by the lacing angle and thickness of the cover plate.

키워드

참고문헌

  1. Anandavalli, N. (2012), "Experimental and analytical studies on laced reinforced concrete and laced steel concrete composite elements", Ph.D. Thesis; Department of Civil Engineering, Anna University, Chennai, India.
  2. Anandavalli, N., Lakshmanan, N., Iyer, N.R., Samuel Knight, G.M. and Rajasankar, J. (2011), "A novel modelling technique for blast analysis of steel-concrete composite panels", Procedia Engineering, 14, 2429-2437. https://doi.org/10.1016/j.proeng.2011.07.305
  3. Anandavalli, N., Lakshmanan, N., Samuel Knight, G.M., Iyer, N.R. and Rajasankar, J. (2012), "Performance of laced steel-concrete composite (LSCC) beams under monotonic loading", Eng. Struct., 41, 177-185. https://doi.org/10.1016/j.engstruct.2012.03.033
  4. Attard, M.M. and Setunge, S. (1996), "The stress-strain relationship of confined and unconfined concrete", ACI Materials Journal, 93(5), 432-442.
  5. Au, F.T.K. and Bai, Z.Z. (2007), "Two-dimensional nonlinear finite element analysis of monotonically and non-reversed cyclically loaded RC beams", Eng. Struct., 29(11), 2921-2934. https://doi.org/10.1016/j.engstruct.2006.12.009
  6. Bowerman, H., Coyle, N. and Chapman, J.C. (2002), "An innovative steel-concrete construction system", The Structural Engineer, 80(20), 33-38.
  7. Clubley, S.K., Moy, S.S.J. and Xiao, R.Y. (2003a), "Shear strength steel-concrete-steel composite panels. Part I-testing and numerical modelling", J. Construct. Steel Res., 59(6), 781-794. https://doi.org/10.1016/S0143-974X(02)00061-5
  8. Clubley, S.K., Moy, S.S.J. and Xiao, R.Y. (2003b), "Shear strength steel-concrete-steel composite panels. Part II-Detailed numerical modelling of performance", J. Construct. Steel Res., 59(6), 795-808. https://doi.org/10.1016/S0143-974X(02)00062-7
  9. Foundoukos, N. and Chapman, J.C. (2008), "Finite element analysis of steel-concrete-steel sandwich beams", J. Construct. Steel Res., 64(9), 947-961. https://doi.org/10.1016/j.jcsr.2007.10.011
  10. Guo, Z. and Zhang, X. (1987), "Investigation of complete stress-deformation curves for concrete in tension", ACI Journal, 82(3), 310-324.
  11. Jankowiak, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Found. Civil Environ. Eng., 6(1), 53-69.
  12. Leekitwattana, M. (2011), "Analysis of an alternative topology for steel-concrete-steel sandwich beams incorporating inclined shear connectors", Ph.D. Thesis; Faculty of Engineering, Science and Mathematics, University of Southampton, UK.
  13. Liew, J.Y.R. and Sohel, K.M.A. (2009), "Lightweight steel - concrete -steel sandwich system with J-hook connectors", Eng. Struct., 31(5), 1166-1178. https://doi.org/10.1016/j.engstruct.2009.01.013
  14. Liew, J.Y.R., Sohel, K.M.A. and Koh, C.G. (2009), "Impact tests on steel-concrete-steel sandwich beams with lightweight concrete core", Eng. Struct., 3(9), 2045-2059.
  15. Luo, Y., Li, A. and Kand, Z. (2012), "Parametric study of bonded steel-concrete composite beams by using finite element analysis", Eng. Struct., 34, 40-51. https://doi.org/10.1016/j.engstruct.2011.08.036
  16. Machacek, J. and Studnicka, J. (2002), "Perforated shear connectors", Steel Compos. Struct., Int. J., 2(1), 51-66. https://doi.org/10.12989/scs.2002.2.1.051
  17. Sohel, K.M.A., Liew, J.Y.R., Alwis, W.A.M. and Paramasivam, P. (2003), "Experimental investigation of low-velocity impact characteristics of steel-concrete-steel sandwich beams", Steel Compos. Struct., Int. J., 3(4), 289-306. https://doi.org/10.12989/scs.2003.3.4.289
  18. Tomlinson, M., Tomlinson, A., Chapman, M.L., Jefferson, A.D. and Wright, H.D. (1989), "Shell composite construction for shallow draft immersed tube tunnels", Proceedings of the ICE International Conference on Immersed Tube Tunnel Techniques, Manchester, UK, April.

피인용 문헌

  1. Experimental investigation of steel-concrete composite beams with different degrees of shear connection under monotonic and fatigue loads vol.21, pp.2, 2018, https://doi.org/10.1177/1369433217717121
  2. Deterioration in strength of studs based on two-parameter fatigue failure criterion vol.23, pp.2, 2017, https://doi.org/10.12989/scs.2017.23.2.239
  3. Bending behavior of SWCNT reinforced composite plates vol.24, pp.5, 2016, https://doi.org/10.12989/scs.2017.24.5.537
  4. Mechanics based analytical approaches to predict nonlinear behaviour of LSCC beams vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.311
  5. Response prediction of laced steel-concrete composite beams using machine learning algorithms vol.66, pp.3, 2016, https://doi.org/10.12989/sem.2018.66.3.399
  6. Detection of flaw in steel anchor-concrete composite using high-frequency wave characteristics vol.31, pp.4, 2016, https://doi.org/10.12989/scs.2019.31.4.341
  7. Experimental investigations and FE simulation of exterior BCJs retrofitted with CFRP fabric vol.17, pp.4, 2016, https://doi.org/10.12989/eas.2019.17.4.337
  8. Use of UHPC slab for continuous composite steel-concrete girders vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.321
  9. Laced steel-concrete composite sandwich system in flexure: Experiments, analysis and design vol.23, pp.2, 2016, https://doi.org/10.1177/1099636219842286