한국정보통신학회논문지 (Journal of the Korea Institute of Information and Communication Engineering)

  • 제20권1호
  • /
  • Pages.207-214
  • /
  • 2016
  • /
  • 2234-4772(pISSN)
  • /
  • 2288-4165(eISSN)
한국정보통신학회 (The Korea Institute of Information and Commucation Engineering)
권호 표지
DOI QR코드

DOI QR Code

RFID 기술을 이용한 실내 위치 추적

Indoor Positioning Using RFID Technique

  • Yoon, Chang-sun (Department of Electronics Engineering, Incheon National University) ;
  • Kim, Tae-in (Department of Electronics Engineering, Incheon National University) ;
  • Kim, Hyeon-jin (Department of Electronics Engineering, Incheon National University) ;
  • Hong, Yeon-chan (Department of Electronics Engineering, Incheon National University)
  • 투고 : 2015.11.09
  • 심사 : 2015.12.14
  • 발행 : 2016.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

RFID 기술은 리더와 태그( Tag)라는 장치를 이용하여 정보를 인식하는 기술로 현재 대중교통 및 고속도로 하이패스 등에 사용되고 있다. 본 논문에서는 RFID 기술을 응용해 실내에서 물체의 위치를 추적하는 시스템을 설계하고자 한다. 대표적인 위치추적 시스템인 GPS는 비가 오거나 실내 공간 또는 지하에서는 효율이 좋지 않고 오차가 커지는 단점이 있다. 제안된 RFID 실험은 실내에서 배치된 물체의 이동에 따른 신호의 변화를 시뮬레이션 하고 실제 실험과 비교하여 위치추적에 필요한 데이터를 산출한 후 그 데이터를 근거로 이동경로와 오차를 분석하여 향후 추적시스템에 필요한 자료를 제공한다. 위치 추적에 필요한 시뮬레이션은 실제 물체의 이동 경로를 분석하여 수행하였고 실제 실험에서는 RFID 기술을 이용하여 실내 곳곳에 리더를 설치한 환경에서 위치를 알고자 하는 물체에 태그를 장착시키고 이동시킨 후 실험 장비에서 얻어낸 데이터를 분석하였다. 본 논문에서는 획득한 데이터를 분석하여 향후 실내 위치 추적이 필요한 시스템에 활용될 수 있도록 관련 분석값을 제시하였다. RFID를 통한 위치 파악 데이터는 위치에 따른 태그 판별 결과를 보여주며 분석된 데이터는 추후 실내 위치 파악 연구에 활용될 것으로 기대된다.

RFID technology is a technology perceiving information with the device called reader and tag which is now used in public transportation such as Hi-pass. In this paper, we design a system which tracks indoor location using this technology. GPS, the most frequently used location-tracking system, has a defect that its accuracy decreases when the device is indoor. In suggested experiment, we simulate signals according to the moving of located objects, then compare with the result of the experiment. Based on the extracted data, we inform data which is for the purpose of tracking system based on analysis of the route and errors. Simulations for the tracking were performed with relocation of real objects. In the real experiment, we arrange the readers around the room and move the tagged object that we like to know the location, then analyze the data from the equipment. This paper suggests the analyzed data for the future indoor tag tracking applications. We expect that the RFID based location positioning data will be used for other indoor positioning research and development.

키워드

참고문헌

  1. Woo Chool Park, and Hyung Soo Lee, Myung Hyun Yoon, "Development of Indoor Positioning System for Locationaware Services," Conference on information and control systems, pp. 286-288, 2005.
  2. Tae-Sung Kim, Hyo-Jung Jun and Kwang Woo Nam, "Business Models for Location Based Services," The Journal of The Korean Institute of Communication Sciences, vol. 31 no. 9B, pp. 848-856, Sep. 2006.
  3. Jae Ho Shin, and Yeon Chan Hong, "Development of High-Speed RFID Reader System," Journal of Control, Automation and Systems Engineering, vol. 13, no. 9, pp. 915-919, Sep. 2007. https://doi.org/10.5302/J.ICROS.2007.13.9.915
  4. Klaus Finkenzeller (Giesecke & Devrient GmbH, Munich, Germany), "RFID Handbook Fundamentals and Applications in Contactless Smart Cards and Identification," Wiley, pp. 61-97, May. 2003.
  5. Changsun Yoon, Dongmin Yoon, Youngchan Kwon, Yeonchan Hong), "RFID Based Indoor Localization and Effective Tag Arrangement Method," Journal of The Korea Academia-Industrial cooperation Society, vol. 16, no. 12, Dec. 2015.
  6. P. Nikitin, V. Rao, R. Martinez, and S. Lam, "Sensitivityand impedance measurements of UHF RFID Chips," IEEE Trans. on Microwave Theory and Techniques, vol. 57, no. 5, pp. 1297-1302, May. 2009. https://doi.org/10.1109/TMTT.2009.2017297
  7. A. Ghiotto, T. P. Vuong, and K. Wu, "Chip and antenna impedance measurement for the design of passive UHF RFID tag," EuMC, pp. 1086-1089, Sep. 2010.
  8. T. Bjorninen, M. Lauri, L. Ukkonen, R. Ritala, A.Z. Elsherbeni, and L. Sydanheimo, "Wireless measuremnet of RFID IC impedance," IEEE Trans. on Instrumentation and Measurement, pp. 3194-3206, Sep. 2011.
  9. Yang Zheng, Xiuping Li, "Solution of measuring the impedance of encapsulated RFID chip," ICMMT 2010 Proceedings, pp. 1518-1521, May. 2010.
  10. P. V. Nikitin, K. V. S. Rao, "Effect of Gen2 protocol parameters on RFID tag performance," IEEE International Conference on RFID, pp. 117-122, Apr. 2009.
  11. Yongseog Sim, Jeenmo Yang, "Impedance Evaluation Method of UHF RFID Tag Chip for Maximum Read Range," The Journal of Korean Institute of Electromagnetic Engineering and Science, vol. 24, no. 12, pp. 1148-1157, Dec. 2013. https://doi.org/10.5515/KJKIEES.2013.24.12.1148
  12. EPC Global Radio-Frequency Identity Protocols Class-1 Generation2 UHF RFID, ver 1.0.9, 2005.
  13. Hyunchul Shim, Chunghyun Cha, Jongtae Park, Chonggun Yu, "Design of a Low-Power CMOS Analog Front-End Circuit for UHF Band RFID Tag Chips," The Institute of Electronics Engineers of Korea Semiconductor and Devices, vol. 45, no. 6, pp. 28-36, 2008.
  14. Changyong Han, and Gyeyoung Lee, Jaegeol Yim, Kyubark Shim, "Implementation of AP-Based and RFID-Based Indoor Positioning Web Services," Journal of Korea Multimedia Society, vol.15, no.1, pp. 71-80, Jan. 2012. https://doi.org/10.9717/kmms.2012.15.1.071
  15. L. Cong and W. huang, "Non-line-of-sight error mitigation in TDOA mobile location," Global Telecommunications Conference IEEE, vol. 1, pp. 680-684, 2001.
  16. Y.Chan, W. Tsui, H. So, and P. Ching, "Time-of-arrival based localization under NLOS conditions," IEEE Transactions on Vehicular Technology, vol. 55, no. 1 pp. 17-24. Jan. 2006. https://doi.org/10.1109/TVT.2005.861207
  17. C. S. Yoon, K. Y. Jeon, and S. H. Cho, "The performance enhancement of UHF RFID reader in multi-path fading environment using antenna diversity," Proceedings of 2008 International Technical Conference on Circuits/System, Computers and Communications, pp.1429-1432, 2008.
  18. Myunghwan Tak, Sukkun Jee, Younghoon Joo, "Error Revision of the Unknown Tag Location in Smart Space," Journal of Institute of Control, Robotics and Systems, vol. 16, no. 2, pp 158-163, Feb. 2010. https://doi.org/10.5302/J.ICROS.2010.16.2.158

피인용 문헌

  1. 스마트 LED 시스템을 이용한 실내위치인식 정밀도 개선 vol.22, pp.1, 2016, https://doi.org/10.5762/kais.2021.22.1.786
  2. Deep Learning-Based Indoor Two-Dimensional Localization Scheme Using a Frequency-Modulated Continuous Wave Radar vol.10, pp.17, 2021, https://doi.org/10.3390/electronics10172166