The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Rotor Shape Design of Single Phase LSPM for Improvement of Start-up Characteristics and Efficiency

기동특성 및 효율 향상을 위한 Single-Phase LSPM의 회전자 형상 설계

  • Kang, Min-Chul (Dept. of Electrical Engineering, Changwon Nat'l Univerity) ;
  • Cho, Kwang-Jin (Dept. of Electrical Engineering, Changwon Nat'l Univerity) ;
  • Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon Nat'l Univerity)
  • Received : 2015.08.18
  • Accepted : 2015.12.28
  • Published : 2016.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the design of rotor shape was performed for improvement of start-up characteristics and efficiency in single-phase LSPM. In order to improve the start-up characteristics, shape of rotor aluminium cage bar was changed. Through arrangement of permanent magnets and installation of flux barriers, it was performed torque ripple reduction and efficiency improvement. Cogging torque and back-EMF is calculated by the no-load analysis, start-up time is calculated by the start-up state analysis, efficiency and torque ripple is calculated by steady state analysis. The characteristics of the motor were calculated through FEM.

Keywords

References

  1. Won-Ho Kim, Ki-Chan Kim, Seung-Joo Kim, Dong-Woo Kang, Sung-Chul Go, Hyung-Woo Lee, Yon-Do Chun, and Ju Lee, "A Study on the Optimal Rotor Design of LSPM Considering the Starting Torque and Efficiency", IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1808-1811, 2009. https://doi.org/10.1109/TMAG.2009.2012757
  2. Marcic T, Stumberger B, Stumberger G, Hadziselimovic M, Virtic P and Dolinar D, "line-starting Three- and single-phase interior permanent magnet synchronous motor-Direct comparison to induction motors", IEEE Transactions on Magnetics, vol. 44, No. 11, pp. 4413-4416, 2008. https://doi.org/10.1109/TMAG.2008.2001537
  3. Aliabad A.D, Mirsalim M and Ershad N.F, "Line-Start Permanent-Magnet Motors: Significant Improvements in Starting Torque, Synchronization, and Steady-State Performance", IEEE Transactions on Magnetics, vol. 46, no. 12, pp. 4068-4069, 2010.
  4. H. Nam, K. H. Ha, J. J. Lee, J. P. Hong, and G. H. Kang, "A study on iron loss analysis method considering the harmonics of the flux density waveform using iron loss curves tested on Epstein samples," IEEE Transactions on Magnetics, vol. 39, pp. 1472-1475, 2003. https://doi.org/10.1109/TMAG.2003.810198
  5. Dae-Sung Jung, Seung-Bin Lim, Jin-Hun Lee, Sang-Hoon Lee, Hyung-BinLim and Youn-Hyun Kim, "A Study on the Design and the Characteristics in Single-phase Line-start Permanent Magnet Motor", ICEMS International Conference on Electrical Machines and Systems, pp. 878-881, 2007.
  6. Qin Fen Lu and Yun Yue Ye, "Design and Analysis of Large Capacity Line-Start Permanent-Magnet Motor", IEEE Transactions on Magnetics, vol. 44, no. 11, pp. 4418-4419, 2008.