Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

The implementation of cable path and overfill visualization based on cable occupancy rate in the Shipbuilding CAD

조선 CAD에서 선박의 Cable 점유율을 기반으로 Cable 경로 및 Overfill 가시화 구현

  • Kim, Hyeon-Jae (Major of Convergence Technology Engineering, Graduate School of Industry, GNTECH) ;
  • Kim, Bong-Gi (Dept. of Computer Science & Engineering, GNTECH)
  • 김현재 (경남과학기술대학교 산업대학원 융합기술공학전공) ;
  • 김봉기 (경남과학기술대학교 컴퓨터공학과)
  • Received : 2016.10.07
  • Accepted : 2016.11.10
  • Published : 2016.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

선박에는 아주 많은 기계와 장비들이 설치가 되고 이를 운용하고 제어하기 위해 수천에서 수만 가닥의 cable이 설치된다. 이러한 cable들이 복잡하게 설치되기 때문에 정확한 최단 경로 데이터가 필요하다. 하지만 cable 최단 경로를 찾기 위한 일반적인 방법인 다익스트라 알고리즘을 사용하더라도 최단 경로 내에는 반드시 overfill 구간이 생기게 마련이다. 이를 해결하기 위해 설계자는 각 구간마다 cable 점유율을 확인하지만 점유율은 data sheet 형태로 존재하기 때문에 3D cable way 모델상의 육안 식별이 어렵다. 이를 해결하기 위해 본 논문에서는 3D CAD 상에서 cable 점유율 범위에 따라 cable 경로 색상을 다르게 표현함으로써 시각적으로 overfill 구간과 cable 경로를 바로 확인이 가능하도록 cable 경로 및 overfill 가시화 시스템을 제안 구현 하였다. 이를 통해 설계단계에서 overfill 구간을 쉽게 확인할 수 있고 정확한 회피경로의 산출과 최단경로 검증이 이루어져 설치 현장에 정확한 정보가 전달됨에 따라 재작업 비율이 감소하여 작업시간이 전체 7,000 시간에서 5,600 시간으로 단축 되었고 추가로 자재비 절감 효과를 얻을 수 있다.

Keywords

References

  1. Min-Gil, Park, Wan Kyoo, Kim, "Development of Framework for Support System on Outfitting Design of Ships," Journal of the Korea Institute of Information and Communication Engineering, vol. 19, no. 12, pp. 2987-2992, Dec. 2015. https://doi.org/10.6109/jkiice.2015.19.12.2987
  2. Seung-Jin, Kim ; Eun-Hye, Yoo, "A reliabilty study for cable loaded on the ship," Proceedings of the KIEE Conference, pp. 1093-1094, July 2011.
  3. Won-Sun Ruy, Yun-Sik Yu, Dae-Eun Ko, "A Study on the Hole-Plan system combined with 3D CAD," Journal of the Korea Academia-Industrial cooperation Society, vol. 13, no. 1, pp. 1-7, 2012. https://doi.org/10.5762/KAIS.2012.13.1.1
  4. J. K. Lee & J. H. Kim, "A study about Integrated Ship Outfitting System based on the General purpose CAD program," Journal of the Society of Naval Architects of Korea, vol. 29, no. 3, pp. 28-35, 1992.
  5. J. K. Lee, Y. Y. Jang, Y. J. Park, & D. H. Jeun, "Development of Integrated Outfitting Design System," Journal of the Society of Naval Architects of Korea, vol. 30, no. 4, pp. 33-36, 1993.
  6. K. T. Moon, Y. S Yang, Y. P. Youn, & W. S. Ruy, "The Study on Risk and Redundancy Assesment Methodology of Ship Machinery System," Journal of the Society of Naval Architects of Korea, vol. 47, no. 1, pp. 76-87, 2010. https://doi.org/10.3744/SNAK.2010.47.1.076
  7. H. W. Suh, & S. G. Lee, "Integrated CAD System for Ship and Offshore Projects," International Journal of CAD/CAM, vol. 6, no. 1, pp. 41-48, 2006.
  8. J. B. Kim, "An Empirical Study on the Success Cases of Digital Manufacturing System Implementation in Manufacturing Industry - Focused on Smart Factory," Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology, vol. 5, no. 4, pp. 1-8, Aug. 2015. DOI: http://dx.doi.org/10.14257/AJMAHS.2015.08.12
  9. Hyeon-Jae, Kim ; Bong-Gi. Kim, "Implementation of Color Visualization for Cable Route Path based on Cable Occupancy Ratio in Shipbuilding CAD Environment," Proceedings of the KAIS Conference, 2016.
  10. Hyeon-Jae, Kim ; Bong-Gi. Kim, "Implementation of the route Visualize of Ship in 3D CAD" Proceedings of the KIEE Conference, 2016.
  11. http://thesoul214.blogspot.kr/2013/07/blog-post.html
  12. S. U. Lee, "A Real-time Point-to-Point Shortest Path Search Algorithm Based on Traveling Time," The Journal of The Institute of Webcasting, Internet and Telecommunication, vol. 12, no. 4, pp. 131-14, 2012. DOI: http://dx.doi.org/10.7236/JIWIT.2012.12.4.131